Upgradation of Common Kitchen / Langar at Government SMHS Hospital Srinagar

CIVIL PART Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead

Dismantling of kota stone flooring including cement concrete upto required depth including stacking of serviceable material and disposal of unserviceable material beyond muinicpal limits as directed by Engineer Incharge complete job all inclusive.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :From brick work in cement mortar

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level ( Bricks available at site of work. Labour Charges only)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing & laying of stone soling hand packed in foundation and plinth including ramming, watering, compaction & lead lifts all carriages upto site of work complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (18mm) Granite of any colour or shade

Area of slab above 0.50 sqm

Area of slab upto 0.50 sqm

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Providing and fixing Imported wooden panelling high tech knotted of approved make, approved design as directed by the Engineer Incharge at time of execution of work including labour, material, wastage, carriage complete job incuding fixing of framework of section (1 1/2"x2") at maximum spacing of 1'6"x1'6" framing of imported wood on walls and fixing in position including cost of screws, nails, etc as per the direction of Engineer Incharge and all carriages of material as involved upto site of work including applying of touchwood of approved brand complete job.

Providing and fixing AC-5 Laminated HDF flooring of standard melamine impregnated decorative film with highly resistant surface impregnated with melamine resins and aluminium oxide 12mm thick flooring with glueless installation technique having fire resistance ,water resistance ,and scratch resistance beneath layer of 2mm thermacoal and poly ethylene sheet for moisture resistance complete job of approved make and design by the competent authority including dismantling of old and damaged flooring

Providing and fixing AC-3 Laminated HDF WALLof standard melamine impregnated decorative film with highly resistant surface impregnated with melamine resins and aluminium oxide 08 mm thick flooring with glueless installation technique having fire resistance ,water resistance ,and scratch resistance beneath layer of 2mm thermacoal and poly ethylene sheet for moisture resistance complete job of approved make and design by the competent authority including dismantling of old and damaged panelling.

Providing and Fixing vitrified wall tiles tiles with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, Size of tile1200x600 mm including EPOXY Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing of C.P fittings of approved make jacquar or equivalent .

Basin mixer

Wall mixer

sink mixer

Angle valve

PVC connection (24")

PVC connection (18")

PVC waste pipe flexible

CP Grating, anti cockroach trap

Bib Cock

Towel Rod

Soap case

Health faucet

Chain 1m long

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitrous china wash basin with pedestal (Cera/Hindware/ parryware) including all necessary fitting and fixtures complete job. inclusive all as per direction of Engineer Incharge size 550x440mm

Providing , installation, commissioning and testing Hot water Geyzer of approved make including fixing with bolts/ fasteners/PVC connection etc. Venus, Recold, Hindware, Havells, Jaquar, Crompton of required capacity fittings and fixtures all complete wherever required in the course of completion. complete job.

50 liters

35 liters

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040mm bowl depth 250mm

Engagement of labour ,plumber, helper ,carpenter, for removing old CP fittings,old steel sinks, removal of old GI pipes their cutting and refixing of the serviceable CP fittings including steel sinks for dismembering existing doors and chowkats incl. sawing and moulding them again to the required size ,also includes to resize the existing doors complete job as directed including stacking of serviceable material.

Plumber

Helper

Carpenter

Labour

Providing & fixing PVC pipe heavy duty Type-B (prince, Finolex), Water or Vent pipe with cowl. also including cost of all fittings and fixture like bends Tee's Collars Sockets Spigots ,reducers ,traps, washers, Earth work, Sand Cushion and Back Filling wherever required as per the direction of Engineers in charge.

100 mm diameter

75 mm diameter

50 mm diameter

Providing & fixing PVC pipe fittings of Prince/supreme or equivalent Type-B as per directions of EIC-:-

Plain Bend 75mm

Plain Bend 100mm

P-Trap 100mm

P-Trap 75mm

Door Tee 75mm

Door Tee 100mm

Plain Tee 75mm

Plain Tee 100mm

100mm F trap

Collar 100mm

Door bend 100mm

Elbov 2''

Plain Tee 2''

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Including dismantiling of old W.C

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

External work including trenching, refilling etc.

PN-16 pipe 25mm OD

PN-16 pipe , 32mm OD (SDR-7.4)

Providing and fixing Union 25mm

Providing and fixing Ball valve 32mm

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay (non modular) bricks

Engagement of unskilled labour for shifting of different items like utensils chimney, stocks kept in dry store , furniture, cupboards, almirahs like wise items

Engagement of carpentors and helpers for dismembering existing doors and chowkats including sawing and moulding them again to the required size ,also includes to resize the existing doors complete job as directed including stacking of serviceable material and disposal of unserviceable material beyond municipal limits or as directed by Engineer Incharge

Carpenter

Helper

French spirit polishing, Two or more coats on new works including a coat of wood filler

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Imported KD wood

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of :12mm thick pre-laminated particle board (decorative lamination on both sides) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked

Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Imported KD Wood 30mm Thick

Providing and fixing of stainless steel hardware fittings of approved make (standard gauge) including neccesary fittings complete job

Tower bolts 8''

Tower bolts 4''

Handle 6"

Handle 10''

Door stoper

Curtain rod brackets

Curtain rod

Supply installation testing and Commissioning of 300X300mm sweep exhaust fan Shutter type of Havell /USHA/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections complete job;, all incusive.

Providing and fixing of 450mm deep Cabinets/ Almirahs of 19mm plywood with shutters including 0.8mm laminated Dulmica/Sunmica on exposed surface and painting on all internal surface with back side of 6mm ply covered with Dunmica on external surface with all necessary fittings like locks, hinges, knobs, Magnetic catchers, locks dunmica strips, screws/ nails, adhesive tower bolts handles etc complete job: all inclusive, as per direction of Engineer Incharge.

Providing and fixing of hardware fittings of approved brand including neccesary secrews etc

Handle 150mm ( aluminium )

Hinge 75mm ( stainless steel)

Hinge 100mm ( stainless steel)

T bolts 4'' ( aluminium )

T bolts 6'' ( aluminium )

Dismantling of old damaged almirah/wardrobe/ aluminum partitioning including stacking of serviceable material and disposal of unserviceable material as per the directions of Engineer incharge complete job; all inclusive.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal Size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement complete as per standard design Inside size 30x30 cm including providing and fixing of MS cover with frame of required size of gauge With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including all carriage of material as involved upto site of work complete job; all inclusive

Providing and fixing of thermal insulation of 10mm thickness flexible elastomeric foam (NITRILE RUBBER) product of standard quality and make as approved by Engineer incharge to open PPR pipes including cutting, bonding with self adhesive tapes etc to required length including all carriages complete job. all inclusive

Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Imported KD Wood

Providing and fixing ACP 3mm multi coloured ( Fire retardant) in partitions, ceilings, shutters frames etc including cost of rubber, neoprene gasket,taping, waterproof silicon sealent ,or as required at site as per the directions of concerned engineer in charge

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion

Powder coated aluminum (minimum thickness of powder coated 50 microns)

Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Providing and fixing of imported wallpapers (Glass cloth or Fabric type) on walls/ceiling of approved quality like cassio, passion, polo or other including cost of fixing material and labour including preparing even surface to provide smooth texture of wall paper complete job confirming to IS 15418 (2003) design as approved by Engineer Incharge

Supply and installation of signage plates for rooms-meeting halls etc of size 220mm x120mm x3mm in SS304 matt finish having letters engraved in the SS plate in black vinyl steam pressed to get a clean finish and having font size 41mm of name at least 30mm, fixed on the wall or door surface with high quality adhesive tape of 3M or equivalent complete to the satisfaction of engineer in charge complete job; all inclusive

Providing & Applying polymer modified, flexible cementations negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. One coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Supply and laying of 25mm dia PVC medium grade Conduit to be laid in surface /recess complete with all allied accessories like bends, tees etc. paving way of laying of wires of heating points /circuits ,machine points /circuits and sub mains .The Job includes cutting of walls with required hydraulic cutter and refacing of walls with cement plaster of required ratio or with P.O.P after laying of conduits refacing to its original position by way of supply and applying of painting of required colour to effected area's or whole walls for matching of same

Engagment of mechnical transport for disposal of dismantled material out of the Munciple Limts along with loading, un loading, leads and lifts of material complete job

Supplying, fabricating, installing and testing SS 304 commercial kitchen exhaust hood made of 1.2 mm thick stainless steel complete with baffle type grease filters, grease collection tray, centrifugal exhaust fan of capacity 4000-8000 CFM, GI ducting with necessary supports, vibration isolators, electrical connections, earthing and commissioning, complete as per IS 302, NBC 2016 and local fire authority requirements.

Carriage of materials by way of mechanical transport including loading unloading leads lifts from source to site of work complete job.

Sand & Agg 40 mm and above from sources to site of work avg lead 20 Kms

Sand & Agg 40 mm and below from sources to site of work avg lead 20 Kms

Bricks from sources to site of work avg lead 30 Kms

ELECTRIC PART Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required as per IS standard

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit (Partially Laid) with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required as per IS standard

Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent Switch etc.) with 1.5 sq.mm FRIS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit and earthing the point with 1.5 sq.mm 'FRLS PVC insulated copper conductor single core cable etc. as per IS Standard

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required as per IS Standard

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required (For light plugs to be used in non residential buildings

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 and 15/16 A modular socket outlet and 15/16A modular Switch, connections etc. as required as per IS Standard

Supplying and fixing following Modular base & cover plate on existing. Modular metal boxes etc, as required

6 Module

8 Module

12 Module

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supplying and fixing following modular ,switch/ socket on the existing 'modular plate & switch box including connections but excluding modular plates etc as required

3 Pin 5/6 A Socket Outlet

5/6 A Switch

6 Pin 5/6 A Socket Outlet

15/16 A Switch

Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections etc as required

2way 5/6 A Switch

15/16 A Switch

3 Pin 5/6 A Socket Outlet

6 Pin 15/16 A Socket Outlet

5/6A 2 Pin Top

5/6A 3 Pin Top

Wiring for circuit submain wiring alongwith earth sire with the following sizes of FRLS PVC insulated copper conductor medium class PVC ,conduit as required, as per IS Standard

2 X 1.5 sq, mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1x 2.5 sq. mm earth wire

2 X 4 sq. mm + 1x 4 sq. mm earth wire for 16A Power Circuit point

4 X 10 sq. mm + 2x 6 sq. mm earth wire for DB Submain wire

4 X 16 sq. mm + 2x 6 sq. mm earth wire for DB Submain wire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plates etc as required

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing as required

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug to along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

Supplying arid fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc, as required

1 or 2 Module (75mm x75mm)

3 Module (100 x 75mm)

Supplying and fixing following way, horizontal type three pole an neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/ isolator)

8 Way (4+24) Double door

12 Way (4+36) Double door

Supplying and fixing 5A to 32A rating 240/415 V 10KA “C” curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection testing and commissioning etc. as required. Single Pole.

Supplying and fixing following rating 240/415 V 10KA “C” curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection testing and commissioning etc. as required. Single Pole.

Supply, Installation, Testing and commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos, canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/Min, 350 RPM (tolerance as per 1S 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz single phase AC Supply, earthing etc, complete as required

Supply, Installation, Testing and Commissioning of 300mm dia sweep PVC body, 900±10% RPM Exhaust fan with guard and mounting arrangement, commercial series

LED Panel light 2x2 ft. (System lumen efficacy >120 <135 Im/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft, of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F> 0.95, 1P20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends, CT 3000o K / 4000o K / 5700oK /6000oK /6500oK (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing, complete in all respect i/c connections with 1.5 sq, mm FRB, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy > 120 <135 lm/Watt output .LM79 & LM 80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management; heat sink of aluminum housing such that LED junction temperature shall not rise above 90oC), Powder coated die cast/Extruded aluminum Body (Thickness > 1.20 mm)

LED Down lighter (SMO Type) (System lumen efficacy > 120 lm/Watt), Supplying, installation, Testing & Commissioning of LED. Recessed / surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS :10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F > 0.95, 1P20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5 %), life time (LED, Driver PA electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000o K / 4000o K / 5700oK /6000oK /6500oK (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures, "complete in all respect i/c connections with 1.5 sq. mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy > 120 1 <135 lm/Watt output . LM79 & LM80 Test report from NABL, lab for all testing required for LED fixtures as per BIS shall be submitted, Shape size and CCT shall be as approved by Engineer-incharge (12-15 Watt)

Supply, Installation, Testing and Commissioning, of 4ft Linear LED luminaire delivering an initial system lumen of 2000 lumens & the luminaire shall be with system efficacy > 100 Im / W. The luminaire Housing shall be made of CRCA & the diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 5700K with CRI of > 80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V, THD < 10% PF > 0.95, 50000 Hrs LED Life with L70 Criteria, IP20. The LED Driver shall be easily available in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV. The luminaire shall be with following certifications LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard em lumens 1500. Similar to 15W WH RD or equivalent as per IS standard approved list of make

Supply, Testing and Commissioning of 2ft Liner LED Luminer (Mirror light) delivering an initial system lumen of 903 lumens & the Luminaire shall be with system efficacy > 901m / W. The luminaire Housing shall be made of PC & the diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 6500K with CRI of > 80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD < 20% & PF > 0.95 , 50000 Hrs LED life with L70 Criteria,1P20. The LED Driver shall be easily available in India for repair and service. The LED shall be SMlD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 8: LM80 issued by LED manufacture along-with Photeo, -Biological Safety Standard. (equivalent as per IS standard. (approved list of make)