PROVN OF FURNITURE STORE NEAR ADMINISTRATIVE BLOCK AND PROVN OF BOXING RING IN SCHOOL GROUND AT RMS CHAIL UNDER GE JUTOGH

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified & directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard/dense soil complete all as specified.

M&L for PCC 1:4:8 type D-2, using 40 mm graded crushed stone aggregate as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L for brick work, with sub class 'B' brick straight or curvedd on plan exc 6m means radius built in cement mortor (1: 6) complete all as specified & directed.

S&F for Mild steel, TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Srl Item No 07.00 above but for 6mm to 8mm dia in stirrups,ties etc complete all as specified and directed.

M& L for RCC M-30 Design mix using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M& L for RCC M-30 Design mixusing 20 mm graded crushed stone aggregate as in roof beams, landings, canopies etc complete all as specified and directed.

M& L for RCC M-30 Design mix using 20 mm graded crushed stone aggregate as in columns, pillars, posts complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases for columns, raft, tie, plinth beams for rough finished flat complete all as specified and directed.

M&L for formwork for roof beams, lintels, cantilevers rough finshed surface flat complete all as specified & directed

M&L for formwork for columns, posts, pilaars etc square/ rectangular rough finshed flat complete all as specified & directed

M & L for mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts;staging for water tanks wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M & L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; portions hung as gates including pintle hinge, hand made sliding bolts etc complete all as specifiedto Fe.290.Gde-E-165 complete all as specified and directed.

M&L for rolled sections of channel, angle as in purlins, rafters & running rails & guides for sliding doors fixed with angle cleats confirming to FE 290 gde 165 E complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick work or concrete surfaces mixed with water proofing compound as per manufacturer instuction, surface finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately.

M & L for 15 mm thick rendering in CM 1:6 on brick work or concrete surface finished even and smooth without using extra cement complete all as specified and diected.

Supply only integral water proofing compound complete all as specified and diected.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as specified and diected.

Removing excavated materials to a distance n.exc 50 m and depositing where diretected at a level n.exc 1.5 m above the starting point in soil complete all as specified and diected.

M&L for preparation of new or previously untreated surfaces of steel/iron surfaces of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and diected.

M&L for PCC 1:2:4, type B1, using 20 mm graded crushed stone aggregate as in cills, steps, seismic and other similar works plinth course, coping benching, bed plate etc incl necessary formwork complete all as specified and diected.

S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and diected.

S & F pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and diected.

M&L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion over and incl 3 mm thick wall care putty, complete all as specified and diected.

M&L for preparation of plastered or unplastered surfaces of walls and applying two coats of cement base paint of any approved tint complete all as specified and diected.

M & L for cement concrete 1:5:10, type E2,, using 40mm graded coarse aggregate complete all as specified and as directed.

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping railings complete all as specified

M&L for 15 mm thick rendering in CM 1:4 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surface of walls and applying three coats of white wash as on walls complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63mm broken stone or boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D2, using 40 mm graded crushed stone aggregate as in sub base under floors, finished even and fair to receive top finish complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type D-2, using 40mm graded crushed stone aggreage as in floor finishes finishing even and smooth without using extra cement complete as specified

M & L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

Excavation in trenches n.exc 1.5M wide and n.exc 1.5 M in depth for LT UG cable/pole/stay etc on plan and n.exc 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers n.exc 25 CM thick in Soft/loose soil complete all as directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 50 mm dia conforming to IS, approved colour complete with fittings for cable protection. Make Dura line /finolex/Tele Rex

S&F or passing through pipe, XLPE insulated, Armoured, Electric power underground cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 25 sqmm 4.0 Core including Brass compression cable gland, terminal lug etc and testing complete all as specefied and as directed.

M&L for Point wiring with colour coding multistranded copper conductor cable, PVC insulated(FRLS) and unsheathed size 1.5 sqmm wirh concealed conduit with fixing accessories, to be fixed, for one light/fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet/modular with all fittings (ISI Marked) incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 sqmm for earth wire conncected to common earth dolly complete all as specified and directed.

All as per Srl item No 41.00 above but for one 3/5 pin socket outlet, 5 Amp, independent board with cable 2.5 sqmm size complete all as specified and directed.

All as per Srl item No 41.00 above but for one 3/5 pin socket outlet, 15 Amp, independent board with cable 4 sqmm size complete all as specified and directed.

S & F switch piano flush button single pole one way 5 amps complete all as specified and directed.

S & F switch piano flush button single pole one way 15 amps complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5A, flush type complete all as specified and directed.

S & F socket outlet 5 pin, 15A, flush type complete all as specified and directed.

S&F 20W LED 6000K (4’) wall mounted LED batten, extruded aluminium heat sink housing provided for efficient heat dissipation & integrated electronic driver, polycarbonate diffuser including suitable LED tube rod 20W complete all as specified and directed. Make : Havells cat part No ENDURA LINE ARNEOBS 20W LED 840SPCWH or Crompton Greaves CG-LCCB-24-CDL or Polycab LDO0103023

S&F LED Building Security Light LED 30 watt IP 65 protection, made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embeded PC Cover housing with 10 KV built-in-surge protection device incl bracket as per suitable size and all connected fixing accessories with 2.5 sqmm 3 core copper cable upto nearest electric point complete all as specfied and directed. Make :Havells cat part No ENDURA CITYLITE PLAT PLUS SL 30W LED 757SASYBOPC or Crompton Greaves LSTS-30-CDL or Bajaj Model No BCLST 30W LED I

S & F MCB, SP 6-40 Amp, C-Curve, 240V complete all as specfied and directed.

S & F MCB, SPN 6-40A, C-Curve, 240V complete all as specfied and directed.

S & F MCB, TPN 63A, C-Curve, 440V complete all as specfied and directed.

S & F sheet metal enclosures for DB's double door, single pole & neutral 8 way complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion. Note : Cost of earth GI wire 4 mm dia from earth test point to Distribution box included in the quoted rate

M&L for GI pipe light grade of size 25 mm dia laying in trenches/ under floor/on walls / gate / for protection of UG cables / fixing of garden / post top lantern complete all as specified and directed

M/S J.S.ENTERPRISES

R. P. Suppliers and Construction Co.

Bairagi Builders