Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.1 LAccepted-AOC 309 VINAYAK TOWER CUTTACK PURI ROAD BHUBANESWAR 751 006 | KHORDHA | ODISHA | 751006 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹45.3 L+₹4.7 L (11.5%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹47.9 L+₹7.2 L (17.8%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹48.2 L+₹7.5 L (18.6%)Rejected-Finance | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹49.1 L+₹8.5 L (20.9%)Rejected-Finance | L5 | Rejected-Finance Not Being L1 |
Tender Value
Refer Docs
EMD Value
₹78,000
Closing Date
12 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER I GOS
GARRISON ENGINEER I GOPALPUR MILITARY STATION PO GOLABANDHA DIST GANJAM ODISHA 761052
REPAIR REPLACEMENT OF PP R PIPE LINES AND CERTAIN OTHER MAINTAINS WORK OF B R AND E M NATURE UNDER GE I GOS
2023_MES_634154_1
8000/103/2023-24/1002/E8
Open Tender
Civil Works
Item Rate
180 days
GOS
As per tender documents
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER I GOS
₹78,000
18 Mar 2024
23 Dec 2023
13 Jan 2024
23 Dec 2023
12 Jan 2024
6 Jan 2024
Amount
M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed.
M&L for complete removal of existing treatment and applying two coats of walls with distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and gresase spots and applying one coat of cement base paint (white or tinted) complete all as specified and as directed
M&L for complete removal of existing treatment on walls and applying two coats cement base paint complete all as specified and as directed.
M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.
M&L for Preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.
M&L for Preparation of old painted surfaces of steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed
Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed
Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed
S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed
S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed
M&L PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and directed
S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 Gde E-165 complete all as specified and directed
S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.
S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed
S&F Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.
Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed
M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed
Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and as directed
Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed.
S&F for 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs for 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs for 25 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed
S&F in repairs PVC low level flushing cistern 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed
S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.
S&F in repairs 15 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs 20 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs 15mm stop valves (concealed type), cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs 20mm stop valves (concealed type), fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
S&F in repairs for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and as directed.
S&F in repairs for Brass chromium plated shower rose 125 mm size fixing to steel pipe or union complete all as specified and as directed
S&F in repairs PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed.
S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
S&F for Aluminium (Extruded section body) door closer hydrau?lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
S&F in repair Parryware casecade health faucet hose and hook complete all as specified and directed. (Cat Part No T-9937A1) complete all as specified and directed.
S&F in repair 15mm dia Angle Stop Cock with wall flange all as specified and directed. (Cat Part No G1807A1) complete all as specified and as directed.
Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed
M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed
M&L for Brick work with modular fly ash bricks straight or curved on plan to any in half brick thiick walls radius built in CM 1:4 complete all as specified and as directed
M&L for Providing precast cement concrete manhole covers, Type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed
M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
M&L for Mild steel TMT bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
M&L for chequered cement concrete tiles 25cmX25cmX25mm thick, set, joined and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in subbase of floor etc complete all as specified and as directed.
M&L for 100 mm thick Cement concrete type B-2, 1:2:4 (40mm graded aggregate) complete all as specified and as directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
Surface dressing not exceeding 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and as directed.
M&L for Cement concrete Type D2 1:4:8 (40 mm graded aggregates) in foundations, filling and mass concrete complete all as specified and as directed.
Renewing cement concrete tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and as directed.
Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and as directed.
Removing Excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.
M&L for PCC in 1:2:4 Type B0 ( 12.5 mm graded aggregate) asin lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, filling of pressed steel door frames complete all as specified and directed.
M&L for PCC 1:3:6 Type C2 (40 mm graded aggregate) in surface channels and drains complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum in soft soil/loose soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surfacecomplete all as specified and as directed.
S&F for Joist, channel, angle, or tee sections of Fe 290 (Gde E-165) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.
S&F for struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. conforming to Fe-290 Gde E-165
Supply only Chain link MS galvanisd fencing 4 mm dia and 100 mm x 100 mm size mesh complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire
M&L for Mild steel round bars Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
S&F for Mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10 cm long complete all as specified and as directed.
S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed.
Dismantling fencing wiremesh, any type, any size complete all as specified and as directed.
S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed
S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed
S&F for 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed
S&F for 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed
S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed
S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed
S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed
S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed
S&F for PVC (SWR) cowl of 110 mm dia complete all as specified and as directed.
S&F for Stack clamps for 110 mm bore pipe, out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof
M&L for hardcore of broken stone or boulders guage n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for Reinforced concrete pipe 150mm bore class NP2 laid and jointed complete with collars complete all as specified and as directed.
M&L for cement concrete 1:4:8 type D-2 bed to 150 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.
Demolition and breaking up 150 mm dia pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.
Material, T&P and labour for cleaning of manhole using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and removing blockage if any and removing night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines complete all as specified and as directed.
M&L for removing sludge from septic tanks using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 including removal of sludge water mechanically and dispose night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines as per Rule 5 and protective gear and safety devices complete all as specified and as directed.
Material, T&P and labour for cleaning of gully traps, Nahni traps, chamber etc using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and removing blockage if any and dispose night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines complete all as specified and as directed.
M&L for cleaning of sewage line of any size of dia bore with cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and dispose of the night soil/sludge outside MD land unprohibited by any authority and following the statutory law / guidelines as per Rule 5 and protective gear and safety devices complete all as specified and as directed.
Excavation in trenches in hard/dense soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting GI/CI pipe line on cable trench complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
Supply and replacement of media of water pressure filter capacity 6-8 cum including taking out old unsv, servicing of iron removal plant and painting with spray machine with two coat of synthetic enamel paint all as specified and directed.
Taking Down unserviceable GI/PPR pipes and S&F 3-layer PP-R polypropylene random copolymer concealed pipe (PN 16/SDR 7.4) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, floors or in trenches etc of size 63 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C
All as per Item No. 98 above but of size 50 mm OD.
All as per Item No. 98 above but of size 32 mm OD.
All as per Item No. 98 above but of size 25 mm OD.
S&F in repair of PP-R gate valves(brass inlet) as per requirement of size 63 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C
All as per Item No. 102 above but 50 mm OD.
All as per Item No. 102 above but 32 mm OD.
All as per Item No 102 above but 25 mm OD.
Dismantling of old unserviceable and M & L for Construction of Brick masonry valve chamber of size 900x900x900mm (internal dimension) chamber depth to be reckoned from the top of PCC foundation to top of brick wall, including PCC1:4:8 type D2 in foundation PCC 1:2:4 type B1 in coping, brick work in cm 1:4, plaster 15 mm thick in CM 1:4 flush pointing externally as the work proceeds, MS Sheet cover 3.00 mm thick with handle and locking arranging and angle iron frame of size (25 x 25 x 5 mm) including painting with two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed
All as per Item No 106 above but 600x600x600mm
Supply only (Calcium based granular disinfectant for chlorination for water treatment, in Bbsr under AGE E/M GOS, GE (I) GOS in plastic drums fof 45 kg/each drum. Make : Aquafit or equivalent as approved by E-in-Cs Branch.
Supply only alum crystal for water sedimentation complete all as specified and approved by GE.
Cleaning of over head water storage tank of capacity 20000 gallons by dewatering existing water and removing all dirt silt vegetation formation on side walls/staire inside and bottom cleaning with wire brush to remove settled materials and cleaning with clean water and applying lime washing two coats inside the tank including re-writing the date of cleaning capacity of the tank/sump with synthetic enamel white paint on black base complete (ii) Cleaning the surrounding area of the reservior to a distance of 2 mtrs circumferance including cutting of grass digging out roots filling holes and levelling around and removing waster materials to a distance not exceeding 20 mtrs complete and all as directed.
All as per item No 110 above but of capacity 10000 gallons UG sump complete all as specified and directed
Flushing the bore well for flushing of silt, fine sand etc by air compressor of suitable capacity and pumping out turbidity till obtaining clear water all as directed and as per site requirement.
S&F foot valve 50/63 mm dia CI/GI with complete fittings including taking out old unsv complete all as specified and directed.
M & L for carry out water quality anyalsis for bacterial ,chemical and biological analysis including for collection ofwater samples from the Tube well and testing from Govtapproved testing laboratory , submitting of report fromminium following parameters. (a) Turbudity (NTU) (b) pH (c) Total Hardness as CsCO2(mg/l) (e) Iron as Fe(mg/l) (f)Magnesium as Mg (mg/l) (g) E-coli or thermotolerantcoliform bacteria (h) from any NABL accredited lab.Notes: 1. Saperate water samples should be collected &tested from borewell. 2. No payment shall be made to contractortill submission of water test every two month report for the watersamples of pump house all as specified and directed.
Supply only Water testing solution O-TOLODINE bottle 400ML complete as directed and as approved by Engnr-in-Charge.
Supply and fixing and testing CI sluice valves 100mm bore of dia both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.6) and confirming to IS 780 complete and of size 100mm dia Make: Kirloskar/Zoloto/BIR
All as per Item 116 above but of size 80mm dia
M&L for disconnecting and taking down old unserviceable chlorination system and Supply,Install, test and commisioning of chemical dosing system of capacity 25ltr/hr at 10kg/cm2 pressure coupled with 3phase or single phase of capacity 0.5 HP 1440RPM with agiator dozing motor and agiator operated by single phase motor agiator rod (PVC) , sweep blade ,FRP tank of capacity 150Ltr with inlet,outlet connection and drain point hole complete all as specified and directed. NOTE: The Unsv. Pump sets will be Deposited to the AGE E/M Store yard .
Taking down old unserviceable and Supply and fixing Monoblock pump sets , electric driven ,Three phase suitable for suction and delavery line size 100x100 mm,Head 44 mtr ,16 LPS of 15 HP (11KW ), complete fiting and testing ,alignment of motor , all as specified and directed NOTE: The Unsv. Pump sets will be Deposited to the AGE E/M Store yard .
Taking down old unserviceable and Supply and fixing Open well submersible pump,5 HP electric driven 415 v, 40Mtr Head,180LPM, 50mm outlet (Model KS6B- Series Make :Kirloskar/CRI including lowering by manpower & mechanical complete all as specified and directed NOTE: The Unsv. Pumpsets will be Deposited to the AGE E/M Store yard .
Taking down old unserviceable and Supply and fixing submersible pump, electric driven 415 v, TP suitable for 200/250 mm bore well (Casing pipe size200/250mm) supply and install 7.5 HP, 75 mtr Head,180LPM, 50mm outlet (Model KS6B- Series Make :Kirloskar/CRI including lowering by manpower & mechanical complete all as specified and directed. NOTE: The Unsv. Pumpsets will be Deposited to the AGE E/M Store yard .
Supply and fixing 3 core copper submersible flat cable 10 Sqmm size, 1100 volts gradeIncluding taking down unserviceable burnt cable all as directed and specified by Engr-in-charge. Make : Polycab or equivalent in Havells/HPL/KSB
All as per Item 122 above but of size 6 sqmm
Replacement of old rusted GI Column Pipe heavy grade of size 50 mm dia in pieces of 3.3 metre long , lathe m/c threaded both ends in the bore/open wells complete all as specified and directed. Make –Tata/Jindal
Replacement of old rusted heavy grade GI socket of size 50 mm dia complete all as specified and directed by EIC.
S & F LED light fitting 1 x 40 Watt LED Al batten complete with new generation LED T8 batten for multipurpose application made from extruded aluminium housing and polycarbonate diffuser complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed. Make : Surya SLE BTN T8 40W Havells/Philips.
Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x20 Watt 4 FT complete, Trim LED NEO all as per Surya Cat Part No SLE BT 20 IL equivalent in Philips/Wipro.
S & F LED light fitting 1 x 10 Watt T5 Al batten type, indoor decorative PC housing extruded T5 Al LED battens with extruded aluminium housing and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed Make : Surya Cat No SLE BT 10 or equivalent in Havells/Philips.
Taking down carefully copper/aluminum point wiring (light, fan/exhaust fan, bell, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders, brackets, bell, bulk head fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.
Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly by providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick concealed in wall (duly painted with two coats of black bituminous paint over a coat of red oxide primer in and out sides) with and including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screw, washer etc and making good disturbed surfaces of wall and matching colour as per existing for one light point controlled by one, one way switch all as specified and as directed by the Engineer-in-Charge. Make of wire : Plaza/Polycab/Havells.
All as per item No 130 above but for one fan/exhaust fan/bell point point controlled by one, one way switch
All as per item No 130 above but for one 5 Amp socket point controlled by one way switch on independent board.
All as per item No 130 above but for one 5 Amp Socket point controlled by one way switch on the same board with other switches.
All as per serial item No 5 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge. Make of wire : Plaza/Polycab/Havells.
Material and labour for socket outlet 5 in 1, 3 pin, 5A flush type complete all as specified and directed. Make : Indo Asian/ Plaza/ Havells/Anchor
Material and labour for socket outlet 5 in 1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed. Make : Indo Asian/ Plaza/Havells/Anchor
Material and labour for Switch piano flush button 5 Amps complete all as specified and directed. Make : Indo Asian/Plaza/Havells/Anchor
Material and labour for Switch piano flush type single pole one way 15 Amp complete all as specified and directed. Make : Indo Asian/Plaza/ Havells/Anchor
Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals/PVC/polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge. Make : Indo Asian/Plaza/Havells/Anchor
S&F Ceiling Fan regulator electronic step type as per sample all as specified. Make : Indo Asian/Plaza/Havells/Anchor
Material and labour for wooden rectangular block of size suitable for DB 8 way/DB 4 way TPN, closed recessed 3mm thick plastic laminated sheet complete all as specified
Supply and fixing PVC insulated copper wire 1.5 Sqmm, single core including taking out old unsv wire all as specified and directed by Engr-in-charge. Make : Havells or equivalent in Polycab/Plaza.
Supply and fixing PVC insulated copper wire 2.5 Sqmm, single core including taking out old unsv wire all as specified and directed by Engr-in-charge. Make : Havells or equivalent in Polycab/Plaza.
S&F LED lamp 9 Watt all as specified and directed Make : C&S Cat No LTHPLEDLAMP9WB22 or equivalent in Surya/Havells.
Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size complete all as specified. Make : Indo Asian/Plaza/Havells/Anchor.
Supply and fix recess/ceiling down lights 36 watt LED (600x600mm) size, ultra slim with extruded alumininium housing and milky diffuser complete including taking down old unsv all as specified and directed. Make : C&S Cat No LTCRSLM36WATT2x2 or equivalent in Surya/Havells.
Supply and fix switch socket combination multipurpose 2 in 1 3 pin, 5 Amp flush type complete. Make : Havells/Plaza/SSK/Polycab
Supply and fix switch socket combination 2-in-1, 3/5 pin 5 and 15 Amp incl taking down the old USNV complete all as specified and as directed by Engr-in-Charge. Make : Havells/Plaza/SSK/Polycab
S & F bell push piano (Flush type) 5 Amp 240 Volts incl taking down the old unsv complete all as specified. Make : Anchor/Cona/Havells.
S & F bell/buzzer electric single phase 240 volt incl taking down the old unsv complete all as specified. Make : Anchor/Cona/Havells.
S & Fix PVC conduit pipe 20 mm dia complete alongwith necessary fixing arrangement incl taking down the old USNV complete all as specified
S & Fix PVC casing capping 25mm complete alongwith necessary fixing arrangement incl taking down the old USNV complete all as specified
S & F MCB TPN 63 Amp 415 Volts incl taking down the old USNV complete all as specified and as directed. Make : Polycab/Havells/ C&S.
S & F MCB TPN 40 Amp 415 Volts incl taking down the old USNV complete all as specified and as directed. Make : Polycab/ Havells/C&S.
S&F Isolator DP 32A, 240 volts all as specified and directed by Engr-in-Charge. Make : Polycab/C&S
S&F MCB SP 10 to 32 Amp, 240 volt all as directed. Make : C&S/Polycab/Havells.
Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp rated bus bar. Make : C&S/Polycab/Havells.
M&L for complete removal of existing painting by scrapping the old surface, preparation of fan surface and applying spray painting with spray nozzle to ceilling fan of any make and any size with two coat of synthetic enamel paint as existing colour/shade over a coat of red oxide primer complete all as specified and directed.
M&L for taking down ceiling fan & Exhaust fan of any make and any size for repair/replacement of defective spare parts and overhauling the fans by cleaning, greasing and replacement of old split pin, rubber reel, connected items and provide flexible wire of size 23/0.0076 for connection from ceiling rose to fan/exhaust fan, refixing the same and testing complete all as specified and directed. Note:- Rewinding, painting and supply of new components will be measured and paid separately under relevant items complete all as specified and directed.
M&L for rewinding the ceiling fan any make 1200/1400mm sweep and any size with super quality copper conductor adequate winding wire of existing size complete all as specified and directed.
M&L for rewinding the exhaust fan any make 300/450mm sweep any size with super quality copper conductor adequate size of winding wire of existing size, refixing the ball bearing, greasing complete all as specified and directed .
Supply only ball bearing of suitable size for ceilling fans any make, type and size complete all as specified and directed. Make : SKF /TATA /NBC
Supply only capacitor of 4 MFD, 240 Volt suitable for ceilling/exhaust fan complete all as specified and directed. Make :- Universal /Usha/ Electro
Supply only capacitor of 2.5 MFD, 240 Volt suitable for ceilling/ exhaust fan complete all as specified and directed. Make : Universal/ Usha/Electro
Supply only down rod of ceiling fan with medium grade of 15 mm size pipe complete with drilling holes, cutting and making threads as per site requirement up to 0.50 to 1 mtr, painting with two coats of paint as existing all as specified and directed.
S&F PVC flexible pipe of size 15mm or 20 mm all as per site reqmt for protectin of wire all as specified and directed by Engr-in-Charge
S&F Plastic enclosure without MCB SP & DP as required in site with fixing on wall/pole etc with binding/fixing material all as specified and directed by Engr-in-Charge. Make : C&S/Havells/Indo Asian.
Supply and fixing PVC insulated copper wire 1.5 Sqmm, three core including taking out old unsv wire all as specified and directed by Engr-in-charge. Make : Havells or equivalent in Polycab/Plaza.
supply and replacement bolts, nuts and washers, rubber reel, capacitor clamp, split pin of appropriate size as required at site for ceiling fan of any size.
Excavation in trenches in soft/dense soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out pole foundation/cable trench complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
Supply and providing sand cushioning with dry clean sand 8 cm below cable and 15 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.
Supply and laying Fly ash bricks in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed.
Supply, laying and testing XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, with aluminium conductor 1100 V grade laid in trenches/ along poles, ducts or through sleeve including taking out existing unserviceable cable of the 25 Sqmm 3.5 core complete all as specified and directed Make: Polycab/Havells/Gloster. Note : Earth work, sand cushioning and bricks will be measured and paid separately under relevant items.
All as per item No 175 above but for 10 Sqmm 2 core
Supply and fixing for GI tubing light grade with all fittings laid in trenches or under road crossing or fixed along walls/poles as protection pipe with clamps, nut, washer bolts (where necessary) bore of pipe 40mm including taking down existing pipe complete all as specified.
Supply and fix Thermal Magnetic release, MCCB 100 Amps/80 Amps/63 Amps 415 Volts, 4 pole 25 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required items Including Taking down old unservicable Mccb's all as specified and directed by Engr-in-Charge. Make C&S /L&T/Havells
Supply & fix pole box of new technology made up of Thermoplastic Polycarbonate Pole box, install, testing and commissioning of Thermoplastic Polycarbonate Pole box which is shock, rust, dust, impact and water proof, halogen and silicon free, UV resistance with internally embedded gasket high grade gasket made of polyurethane. The thermoplastic pole box suitable size with degree of protection IP 65, type tested, system voltage – 230V , 50Hz, Capacity with temperature resistance of -40°C to 120°C, with cable entry ,suitable size of Glands, all as specified and duly mounted on steel tubluar pole with suitable MS flat with bolts nuts and washers complete including supply fixing and making provision of the following :- (a) MCB SPN 30/32 Amp.
Painting to existing steel tubular LT poles , 9m long including cross arms, channels, angle iron support, bracings, clamps etc. with two coats of aluminium paint superior quality of approved make on surface expose to view and making 30 cm wide strips (total 5 Nos) with white and black paint alternatively on external surface above PCC benching including prepration of old painted surface by scraping complete all as specified and directed by Engr-in-Charge.
Maint and servicing of window type/split type air conditioner including cleaning filter, washing with soap solution after removing from site and refixing complete all as specified and directed by Engr -in-Charge.
Supply and replacement unserviceable compressor (sealed unit) from split type air conditioner of capacity 1.5 Ton on position with nuts, bolts, ruber gromote and washers, connecting copper tubing by welding/flare nuts including taking out old unsv compressor of make approved by Engr-in-Charge all as specified and directed.
Supply and replacement running capacitor 36/45/80 MFD suitable for 1.5 Ton window type and split type air conditioner including taking down old unsv all as specified and directed. Make : SARADA/KEIL/KELTRON/ORICAP
Supply and replacement starting relay assembly including coat & cover and clips suitable for window/split typeair conditioner all as specified and directed. Make : TECHNOMECH/KELTRON
Supply and replacement thermostat switch suitable for air conditioner 1.5 Ton capacity any make all as specified and directed by Engr-in-Charge.
Supply and replacement of blower motor suitable for 1.5 Ton window/split type air conditioner AC single phase 230 Volts including bushes, testing and commissioning complete all as specified and directed by Engr-in-Charge.
Supply and replacement of air filter Pad suitable for air conditioner 1.5 Ton capacity complete all as specified and directed by Engr-in-Charge.
Carrying out pressure leak test by nitrogen pressure for detecting leak in condensing unit, refrigerant pipe and repairing the leakage by welding or brazing of condensing unit and refrigerant pipe, putting under pressure for leak, checking after repairs of leak pipe including transporting and carrying out T&P required at site for work of 1.5 Ton capacity air conditioner all as specified and directed.
Flushing out by N2 and CTC, vaccumnation, supply and charging of refrigerant gas into the system for 1.5 Ton capacity air conditioner all as specified directed
Dismantling of defective cooling indoor/outdoor unit of 1.5 Ton capacity of split type air conditioner complete with connected piping and corded remote control etc and refixing on wall/floor after carrying out repairs and servicing and making good the disturbed surfaces all as specified and directed by Engr-in-Charge.
Supply and replacement of condensing unit of 1.5 Ton capacity complete with connected lead and iron stand etc including taking down old defective all as specified and directed.
Supply and replacement of cooling coil assembly suitable for air conditioner 1.5 Ton capacity all as specified and directed.
Supply and replacement suction copper pipe line heavy ½” dia with foam insulation and flair nuts from indoor to out door unit of split type air conditioner 1.5 Ton capacity all as specified and directed.
Supply and replacement suction copper pipe line heavy 3/8” dia with foam insulation and flair nuts from indoor to out door unit of split type air conditioner 1.5 Ton capacity all as specified and directed.
S&F single pole and neutral enclosure with a two pin and earth plug socket 240 volt with one MCB SP ‘C’ series rating 20 to 32 Amp incl taking down the old USNV complete all as specified and directed. Make: C&S/Polycab/Havells.
Supply and replacement heating unit (element) ISI marked of 1500 watts triangular/circuler shape as per sample required in existing geysers installed at site including rubber washers complete all as specified and directed. Make : Umpire/Wondercool/Ditz/ Toshiba
Supply and replacement thermostat range 0°-75°C for the geysers of 25 to 35 litres as per sample required in existing geysers installed at site complete, all as specified and directed.
Supply and replacement safety valve/high pressure valve 15 mm complete, all as specified and as directed.
Supply and replacement PVC threaded tough rubber flexible pipe/tubing of 15 mm size with PTMT nuts at both end 300/450 mm long for geysers inlet/ outlet connections, all as specified.
Supply and replacement Indicator lamp rectangular/round type as required at site all as specified and directed.
Comprehensive maintenance of DG Set including Alternator AMF Panel for routine check up of the engine for the smooth functioning and carrying out the checks complete as per the manufactures instructions all as specified and directed by the Engineer-in-Charge for 40 KVA DG Sets installed. (A) Every 50 Hours/One month whichever is earlier (a) Repeat the daily checks (b) Check oil level in the oil bath type air cleaner (c) Check the fan belt tension. The deflection should be within 8 to 10 mm at the Centre (for details pleaser refer to the maintenance manual) (d) Check the electrical connection
Comprehensive maintenance of DG Set including Alternator AMF Panel for routine check up of the engine for the smooth functioning and carrying out the checks complete as per the manufactures instructions all as specified and directed by the Engineer-in-Charge for 40 KVA DG Sets installed. (a) Every 200 hours/Six month whichever is earlier (b) Repeat the 'B' Checks (c) Service the oil bath type air cleaner (d) Replace the engine main lub oil filter element & sealing ring (e) Grease the water pump bearing (f) Clean the button filter (g) Replace the Air filter. (h) Replace the filter element (Oil filter, fuel filter etc) complete. (j) Replace the lubricant oil (IC engine for Gen set application). Old oil should be drained out after warming the engine. (Use MIL-L 2104C mono-grade oils only/15W40 overlain cummins/equivalent) (k) Replace the engine and turbocharger lubricant oil filter element. (l) Check oil level in the fuel pump and top up if required. (m) Drain radiator after warming the engine, change the water. (n) Knock out soot from the exhaust silencer. (o) Check and tighten all fasteners to the specified torque. (p) Check the tighten all hose connection check and tighten all lubricant and fuel connection.
Servicing of radiator assembly complete for cleaning after draining out cooling water/coolant, spaces cleaning the inter coller and replace unserviceable rubber hose pipes, circlip clamps, cleaning of radiator mix with appropriate cleaning agent, de-scaling by means of scale solvent as well as neutralising agent to arrest leakages by means of brazing etc including replacement of coolant for the capacity of DG Set 40 KVA all as directed by Engr-in-charge.
Repair and servicing of 40 KVA Engine Kirlosker type RB 66/Cummins turbocharger assembly and replacing the service kit and reassembling testing complete, all as specified.
Servicing of self starter assembly of DG Set 24/12 Volts of 40 KVA capacity by disconnecting the self starter assembly from the engine and dismantling cleaning all accessories, replacing worn out parts like carbon brushes contact plates jumping levels etc and rewinding the fields coil and warnishing all as specified.
Supply and fixing street light fitting LED type 45 Watt new generation energy saving powder coated pressure die cast aluminum high powder with heat resistant toughened glass with lens & IP65 with high power LEDs as light source and electronic driver with GI tubing 40mm dia, mounting bracket with its clamp incl two coats of synthetic enamel paint over a coat red oxide primer and with all accessories, incl connecting of with 2 run of flexible copper conductor of size 1.5 sq mm cable from fitting to junction box, testing & commissioning complete all as specified and directed. Make : Philips or equivalent in Surya/Havells.
Supply and fixing decorative LED post top lantern luminaire with milky diffuser and painted aluminium deflector complete with connecting of suitable size of wire incl taking down old unsv all as specified and directed by Engr-in-Charge. Make Philips or equivalent in Surya/Havells.
Supply and fixing 9W decorative LED extruded aluminium bollard light with integrate driver complete with connecting of suitable size of wire incl taking down old unsv all as specified and directed by Engr-in-Charge. Make Philips or equivalent in Surya/Havells.
M/S. KISHAN ENGINEERING
M/s Bapujee Builders and Traders
R K Traders
V.Venkata Ramaiah
M/s M M Engineering Systems
R J ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .