PROVN OF PERIPHERAL FENCING WITH SCREEN AT GTO OUTDOOR AND OBSTACLE COURSE FOR RECRUITS AT CGSB SECTOR-62 NOIDA UNDER AGE (I) CG NOIDA

Amount

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc. or for shafts, wells, cesspits,manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

All as per srl item n 1.00 here-in-before but exceeding 1.5 m but not exceeding 3.0 m.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft /loose soil complete all as specified and as directed.

M&L for Removing excavated material i.e. soft/loose soil out of defence land and depositing as per NGT guidelines complete all as specified and as directed.

M&L for Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for M-25 Design Mix (using 20mm graded crushed stone aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M & L for form work to sides of concrete foundation, footing , base of columns, raft and raft beams, sides and so fits of foundation and plinth beams and similar work, flat complete all as specified and as directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F Rolled sections Fe 410W(Gde-E- 250) quality-A as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates complete of any size and length as required at sine and directed by Engineer-in-charge including necessary cutting welding or any other required process for fixing the same all as specified and as directed Note: Quoted rates includes the cost of T & P required at site for carrying out the work.

S & F multipurpose Green shade net/Fence net 90% shading with eyelets,breathable material design allows cooling breezes and light to pass through for better airy and comfortable space,allows rains to pass through,so there is no pooling of water complete and fixing with nylon ropes and PVc tags such that net will remains always tightened complete all as specified and as directed.Note : (i) Quoted rates includes the cost of nylon ropes, tags etc required fixing of green net. (ii) Sample to be approved from users.

M&L for painting to steel surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide all including peparation of surfaces and applying two coats of mordant solution to remove coating of galvanisation over new steel surfaces etc complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe-290-E-165. Complete all as specified and directed by Engr-in-charge.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or, screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 10cm and n.exc. 15 cm long of dia 16 to 20mm complete all as specified and as directed.

S & F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, bore pipe 100 mm dia pipe complete all as directed.

M/s SAAR ENGINEERS

GLIBS CONSTRUCTION

M/s SHRI RADHEY BUILDERS