ADDN / ALTN AND UPGRADATION OF BLDG NO T-5 (OR MD ACCN) OF INF BN (TA) AT KATAPAHAR UNDER AGE (I) DARJEELING

Amount

Taking down cement or cement lime plaster, any description on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface (Externally) in cement mortar (1:4) on internal wall finished even and smooth including WPC (without using extra lime or cement), complete all as specified and directed. (Note: WPC mesured and paid separately).

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, (Internally) including finished even and smooth (without using extra lime or cement), complete all as specified and directed.

Supply only integral water proofing compond, all as specified and as directed.

M&L for preparation of new plastered or unplastered surface of wall and applying two coats of distemper oil emulsion (OBD), over a coat of priming coat (Chalk whiting, on plastered surfaces, preparatory to distempering), complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion (OBD), of any tint as approved by AGE (I) , complete all as specified and directed.

M&L for 1mm thick wall care putty on wall, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.5 litre/ 10 sqm over and including priming coat of exterior primer applied @ 1.0 litre/ 10 sqm over old surfaces, all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed.

Dismantling baording any description fixed in any position with nails.

M&L for 75mm thick plain cement concrete (1:4:8), type D2 (using 40mm graded stone aggregate) as in sub-base, sub-floors, floors, pavings etc., all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for hardcore using broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc. including 10 mm thick rendering cement mortar (1:4), coloured cement to match the shade of tiles complete and pointed in white or coloured cement to match the shade all as specified and directed.

M&L for glazed ceramic colouered tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surface such as risers of steps, skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick rendering in cement mortar (1:3) finished even and rough, complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick, premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not specifically provided for, complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) (1:2:4), type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and as directed.

M&L for providing precast cement concrete (1:2:4), type B1 (using 20mm graded crushed stone aggregate) in window or door cills,lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar (1:4) complete with joints to match, all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M & L for Marbale tiles 30cmx20cmx20mm thick machine cut, bedded and jointed with grey cement slurry including cutting and polishing including mirror polishing ove and including 15 mm thick Screed bed in CM 1:4 complete all as specified and directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed

S&F of aluminium anodised snap grid frame work of size 605mm X 605mm framework for ceiling with aluminium tee section of size 23.5mm X 26.4mm X 1.4mm thick and aluminium angle section of size 36.5mm X 25mm X 1.4mm thick, for false ceiling incl Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long incl 4mm thick non asbestos E-board, HSPC fixed to frame, complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for brickwork with fly ash bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mortar(1:6), complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4), complete all as specified and directed..

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated/ Semi-corrugated/Profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F Pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified complete all as specified and directed.

Taking up or down old 15 mm bore steel water tubing and connections, including cleaning for refixing or removal to store or from site, complete all as specified and directed.

Supplying and laying of 16mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Taking up or down 20 mm bore old steel tubing and connections, including cleaning for refixing or removal to store or removal unserviceable pipe from site, complete all as specified and directed.

Supplying and laying of 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls, complete all as specified and directed.

&F in repairs of Wall Mixer with non-telephonic chromium plated cast copper with approved make CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia., complete all as specified and directed

S&F in repairs of 15mm bore dia bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair of 15mm bore dia stop valves, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F of PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repair of Vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc., complete all as specified and as directed.

Supply only plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and as directed.

S&F of health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 litre capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS:2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type, complete all as specified and directed.

S&F of Vitreous china wash basin white, flat back, size 450 X 300 mm excluding tap waste but incl bracket and incl cutting for and pinioning in ends of brackets but exclusive of supply waste pipe, complete all as specified and directed.

S&F of 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, all as specified and directed.

S&F PVC waste pipe 32mm dia suitable length for WHB/Sink all as specified and directed.

S&F of 15mm bore dia fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, all as specified and directed.

S&F of Kitchen stainless steel plate rack of size 31"X30"X10" of approved make incl necessary fixing/fitting & making good the existing surface, complete all as specified and directed.

S&F of brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair kitchen sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n exc 1000 litres and removing to store, complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-l and directed.

S&F of 20 mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms), all as specified and directed.

Supplied and fixed of 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F of 110mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F of PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F of PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F of 110mm bore PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement, complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed.

S&F of 100mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof all as specified and directed.

M&L for 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75 mm thick plain cement concrete(1:3:6), type C2 (40 mm graded stone aggregate) as in flooring, plinth protection, hard standing, path etc including finish the surface even and smooth with using extra cement, complete all as specified and directed.

Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames exc. 1.5 sq. m but n exc 4 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.

S&F of solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed.

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed.

Dismentling of fillets rails, posts, rafter, Purling etc under 40 sqcm in section (framed work), complete all as specified and directed.

M&L for well seasoned second class hard wood timber scantling (clean sawn) in timber fixed work, complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as specified and directed.

S&F of pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock, strike plate, etc., complete all as specified and directed.

S&F 35mm thick 2nd class hardwood rail and style Factory made plain frames, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-1), kiln seasoned and chemically treated : supplied and fitted to chowkhats, complete all as specified and directed.

M&L in repairs 18/19 mm thick prelaminated particle board for cupboard, kitchen, Cabinet shutter, exterior grade, prelimated one sides with decorative choice lamination & other side balancing white lamination and fixed with screws to iron frame work including teakwood lipping 6 mm thick fixed with nails, complete all as specified and directed.

S&F of 100mm size hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, all as specified and directed.

S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, complete all as specified and directed.

M&L for 2nd class hardwood in plain fillets, square rectangular or traingular in section, clean sawn, secured with nails or brads sectional area not exc 3 sqcm, complete all as specified and directed.

S&F of anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

S&F of anodised aluminium powder coated of any colour (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and directed.

S&F of anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S&F of 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

S&F of 100mm size butt hinges, medium weight, cold rolled mild steel, and fixed, all as specified and directed.

S&F of 150 mm size aluminium handles, cast type, anodised, all as specified and directed.

S&F of 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F of curtain rails / harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc., complete all as specified and directed.

S&F of 20 mm thick, second class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc complete all as specified and directed.

S&F PVC (SWR) half round gutter drain pipe 180mm bore complete all as specified and directed.

S&F 180mm PVC (SWR) joint socket as in gutter drain pipe complete all as specified and directed.

S&F 180mm PVC (SWR) joint tee with end cap as in gutter drain pipe complete all as specified and directed.

S&F 180mm PVC (SWR) pipe clamp complete all as specified and all as specified and directed.

M&L for plain cement concrete (1:3:6), type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts, coping, filling in pressed steel chowkat or similar work including weathering, slightly rounded or chamfered angles and throating, including necessary form work, complete all as specified and directed.

M&L for 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

M & L chequered cement concrete tiles 300 x 300 x 20 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments over and including 15 mm thick screed bed in CM 1:6 all as specified and as directed.

M&L for 100mm thick plain cement concrete(1:3:6), type C-2 (40 mm graded stone aggregate) as in floor, plinth protection, hard standing, paving etc and finishing the surface rough to receive screed bed including necessary formwork, complete all as specified and directed.

M&L for providing cement concrete (1:2:4), type B-1, (using 20 mm graded aggregate) as in coping /parepet wall/bed plate /Kerb stone etc. with plain fair faces including chamfers, weathering, slightly rounded or chamfered angles and throating, including necessary form work, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete fittings such as switches,ceiling roses, pendents, regulators, sockets,etc (excluding Light Fitting), removing materials from site and making good disturbed surface of walls & floors etc.

Taking down DB's including MCB's etc all as directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces.

M&L for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694/1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed, drawn in and including PVC Casing caping (ISI marked) (Make- Prestoplast/ Harsh/ Plaza), duly fixed on wall/ceiling with fittings not less than 25X16 mm dia double lock (duly maintaining colour code of wire all as specified) incl MS mounting boards & covers duly concealed for housing Piano Switches, sockets etc complete all as specified and directed. Wiring shall be circuit type and sharing of casing capping as per IS and as directed.

All as per item No. 4 here in above but for for one 3/5 Pin, 5 Amp socket outlet on the independent board complete all as specified and directed.

All as per item No. 4 here in above but for one 3/5 Pin, 5 Amp socket outlet with other switches on the Same board complete all as specified and directed.

M&L for Point wiring with PVC insulated, un-sheathed, stranded copper conductor cable of size 2.5 Sq mm FRLSH conductor drawing in and including PVC Casing Caping 25x16mm double lock or as per site requirement (ISI marked) (Make- Prestoplast/ Harsh/ Plaza) including one No. 2.5 Sq mm PVC insulated copper cable for continuous earth wire green in colour and connected to earth dolly for one 6 Pin, 15 Amp socket out let on the independent board. (Color coding of wires shall be Phase, neutral and earth wire all as specified ) and making good disturbed surface of walls & floors etc complete all as specified and directed. Sharing of casing capping as per IS and as directed by the Engr-in-Charge. Separate citcuit from DB shall be made for wiring.

S & F Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volts complete all as specified and directed.

S & F Bell Push Flush type 5 Amp, 240 volt complete all as specified and directed.

S & F Bell Ding-Dong AC 230 V Single Pole complete as dircted complete all as specified and directed.

S & F Ceiling Rose, surface bakelite, three terminals, AC, 230 Volts complete all as specified and directed.

M & L for Socket outlet 3 Pin, 6 Amp flush type, 240 volts complete all as specified and directed.

S & F Switch Socket combination 2 in 1, 5 Amps, 5 pin multipurpose, flush type, 230 Volts complete all as specified and directed.

S & F Switch Socket combination 2 in 1, , 3 Pin, 5 and 15 Amps, multipurpose, flush type universal , 230 Volts complete all as specified and directed.

S & F Socket outlet 2 in 1,3 pin 5and 15 Amp , flush type, 230 Volts complete all as specified and directed.

S & F Switch Piano, flush type, single pole, one way, 15 Amps, 230 Volts complete all as specified and directed.

Supply and fix Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S & F LED Plus bulb 9 Watt B22 CDL 1 S lamp V7 for holder complete all as specified and directed.

S & F in repair wall mounted LED Tube light fitting 20 Watts surface mounting general purpose LED Batterns in Extuted Aluminium housing including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new round blocks including complete all as specified and directed.

Supply and fix in repair decorative wall mounting Floretine WL 1 LS B22 SS brushed nickle finish with opal glass diffuser suitable with 9 Watt LED lamp B22 base incl suitable mounting box complete all as Specified and directed.

S & F in repair sleek LED Bulk head IP-66, fitting 10 watt suitable for outdoor and indoor areas in perfect synchronization with functionality and aesthetics incl suitable mounting PVC boxes complete all as specified and directed.

S & F in repair LED Building Security light fitting 30 watt energy saving environmental friendly long life LED Street light made up pressure die cast aluminium housing with high efficiency LEDs complete with fixing arrangements all as specified and directed.

M&L for sub main wiring with two single core 6.0 Sqmm PVC (FRLSH) insulated multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 6.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed. Note:- Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.

S & F in repair of Sheet Metal Enclouser Double door DB 240 volts, 12 way with rated bus bar Single pole & neutral fixing on suitable wooden rectanguler block, duly connected incoming and outgoing wires in DB and good finish to the old disturbed surface complete all as specified and direceted.

S & F in repair MCB Single Pole Neutral 'C Curve 230 volts of capacity 32 Amp 10 KA complete all and specified and directed by Engr-in-Charge. Make-Legrand Cat no 408617 or equivlanet model in Schnieder/Siemens/C&S/LK.

S & F in repair MCB Single Pole of cap 6-32 Amp 'C' Curve 240 volts 10KA complete. Make-Legrand Cat no 408587 to 408595 or equivlanet model in Schnieder/Siemens/C&S/LK.

Taking down 25 Ltrs Geyser and fitting from its existing position and refixing at the same/new position duly completeing of B/R Work such as plaster, plumbing and wall painting etc complete all as spcified and as directed.

S&F in repair LED bed side light white in colour 7 watt lumen output 400 Lm including suitable mounting box and making connections with 2 core flexible copper wire 0.50 Sq mm Complete all as specified and as directed by Engr-In-Charge. Make Philips Cat no 31437 or equivalent in Surya/ Crompton/ Panasonic.

S&F Exhaust fan, Steel body AC Single Phase 230 Volt of Size 300 mm Sweep with Blades, frame and louvers including making holes on existing wall, plaster work and making good plaster work on disturbed surface complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead wire 4mm dia size by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 3 of SSR part I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to DB as indicated including testing complete.

Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates. Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount.

Darjeeling Enterprises (BID ID -3476194)

THUKKEPA & PANGDOK (BID ID -3476636)

RAI CONSTRUCTION (BID ID -3477471)

BHASKAR PRADHAN (BID ID -3477705)

SANJAY KAUSHIK (BID ID -3478073)

JALAPAHAR HARDWARE (BID ID -3478117)

BIMAL BHATTRAI (BID ID -3478392)

HIRA SINGH (BID ID -3477740)