SPECIAL REPAIR TO FLOORING JOINERY SANITARY AND WATER SUPPLY ITEMS OF SINGLE OFFRS ACCN AT SAF CAMP

Amount

Demolition of PCC in ground floor & pavings not exc 15 CM thickness below or above ground level.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screeding in cm1:6, over PCC 1:2:4 type B-0, (using 12.5mm graded stone aggregate) in sub base of floor .

S&F glazed ceramic coloured tiles 300mmx200mmx6mm thick set and jointed in neat cement slurry and pointed in colour cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed

M&L, Joint free coloured vitrified tiles tile 10 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floor etc set and jointed in neat Cement slurry and pointed in coloured cement to match over and including 15mm thick screeding in cm1:6, over PCC 1:2:4 type B-0, (using 12.5mm graded stone aggregate) in sub base of floor .complete all as specified and directed.

S & F in repair of false ceiling with 9-9.5 mm thick gypsum board tiles laminated with white PVC film on face side & metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film (Make:Polyshield-P (Plain) of M/S SaintGobain Gyproc India Ltd / Daiken gypsum tile of M/S Lucky Global Corporation Co. Ltd) of of any suitable size as directed by EIC including repairing of existing frame work/ grid

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed

S&F in repair , 25 mm thick,Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides for fixing in sliding door with necessary fittings like Guide rail and Flat iron in Base includig taking down existing shutter complete all as specified and as directed by the Engineer-in-Charge

S& F in repair Prelaminated particle board 18/19mm thick , interior grade, prelaminated both sides fixed with screws to iron frame work for partition

S&F locally fabricated plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed by E IC

S & F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. grade Fe 410 -W (GdeE- 250) quality A drilling holes incl FI & tie bar for fixing partical board all as specified and directed by Engr - in - charge

S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification, drawing and colour etc complete all as specified and as directed by Engr - in - charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and as directed.

S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and as directed

S&F aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each.

Taking out existing water closet, pedestal pattern of and replacing with new EWC (Pedestal pattern) cascade type with glazed flush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces all as directed by Engineer-in-charge

Dismantling water tanks and removing to store of steel/PVC of capacity exceeding 500 ltr but not exceeding 1000 Ltr complete all as specified

S&F 1000 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, two layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia gi pipe medium grade overflow pipe 600mm long with fitting including taking down of exisiting unserviceable tank complete all as specified in SSR Part -I complete all as specified and as directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed.

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Taking up or down existing 15 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down existing 20 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supplying, fixing, jointing and testing galvanised iron tubing 15 mm dia bore medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.

Supplying, fixing, jointing and testing galvanised iron tubing 20 mm dia bore medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.

Fixing only old steel tubing 15mm dia bore and connections obtained from taking down against item No 23 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings.

Fixing only old steel tubing 20mm dia bore and connections obtained from taking down against item No 24 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings.

S&F in repair Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.

S&F in repairs 15mm bore stop valve brass CP concealed type (with 15mm nipple for connection) screwed down,high pressure ,with crutch or butterfly handle screwed both ends to GI tubing/fitting

S & F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketsPVC low level flushing cistern sleek plus single flush of colour star whire Make :- Hindwar with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

S&F in repair 15mm bore fancy type chromium plated bib cock long body with flange complete all as specified and as directed

S&F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed.

S/F in repair brass chromium plated health faucet for EWC screwed down to GI tubing/fittings 15mm dia incl 1200mm long stainless steel connection

Supply only PVC waste pipe with 32 mm bore and 65 cm long with cap complete all as specified and directed.

M&L for 75mm thick cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified.

M&L, Preparation of old wooden surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer on complete all as specified and directed.

Providing precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes, drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

M&L, sand cushioing to under concrete interlocking paver block including watering & consolidation complete all as specified

M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement & pigment.

M&L, for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in kerb complete all as specified and as directed.

M & L Concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6

M &bL Salt glazed stone ware (SGSW) grade 'A' pipe 150mm bore laid and jointed on concrete bed complete including testing all as specified.

M/L Machine cut kotas stone slab flooring 20-25mm thick over 20mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to matchthe shade of the slab

S&F, in repair galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete fixing arrangements all as specified and as directed

M & L for 300 mm MS ordinary rat tail rod pattern springs and including roller and rooler late complete fixed in repairs

S & F in repair Seat cover for pedestal pan of white colour

S&F towel rail 600mm long PTMT fixed with & including CP brass screw and wooden/plastic cleats (min wt 190 gms).

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane.

S&F Cast Iron floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

Excavating in trenches in soft and loose soil , not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete and sub base of floor.

Demolition of Brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

M & L Providing precast cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate) louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame complete all as specified and as directed

M &NL Reinforced cement concrete (nominal mix) in TypeB0 1:2:4 (12.5mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed

M&L, Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L, mild steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L, Mild steel bars 5mm dia & over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips as in stirrups complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement all as specified

M&L Preparing new surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete.

Returning, filling in hard and dense soil in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete.

S&F stainless steel kitchen plate rack overall size 900mm x 900mm make out of 0.80mm thick stainless steel sheet etc complete.

S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete inlduding floor trap and bib cock.

Dismantling plain or corrugated Steel sheeting of any gauge any thickness, in roof coverings.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M& L for Preparing old steel / wooden of any description over 10cm width or girth and applying one coats of synthetic enamel paint.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screw

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete.

S&F PVC Cabinet mirror wall mounting size 600x400x160mm rectangurlar shape having shelf.

M & L cleaning of septic tank completely by empty liqoid / semi solid foul contents including cleaning of inlet, outlet and getting using suction pump and filling the foul material into the covered tanks attached to sunction pump and removing and disposing the same at a place maint for disposal of foul material outside the camp area all as specified and directed by EIC

M & L Cleaning of existing manholes any size and depth by removing sluge completely and removing the rubbish to a distance not less than 100 mtr and deposing where directed by EIC

Mild steel work as in flat iron(Size 25 x 3 mm) fillets for securing Posts and struts/ wind ties etc. including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F in repair swivel shower of PTMT any colour for fixing with 15mm pipe with shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete.

S&F cast copper alloy CP jet spray for EWC etc complete all as specified and as directed by the Engineer-in-Charge

S&F in repair Toilet paper holder of brass , cromium plated fixed to walls with chromium plated (CP) brass screws

S&F fancy type PVC coated MS conduit curtain rod 32mm dia with fancy knob type ends and brackets complete all as specified and as directed by the Engineer-in-charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed

M&L, in repair welding n.exc 2.5cm in length for thickness of metal to be welded n.exc 6mm etc complete all as specified and as directed

Supply and fix in repair vitreous china, wash basin white flat back size 630x450mm including cutting for and pinning in ends of brackets or erecting stand,waste coupling,32 mm bore PVC waste pipe of suitable length, and connection complete all as directed complete all as specified and as directed.

S&F Pressed steel frames for doors(125x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete.

S&F Pressed steel frames for window (105x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete.

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S & F Aluminium peg set of five, solid body 175mm to 250 mm long all as specified and and directed by EIC

M/S RAJ KUMAR SINGH

M/s Ravi Traders