SPECIAL REPAIR TO BLDG NO P-88 (FD BTY LINE) OR MD ACCN AT MORAR CANTT UNDER GE GWALIOR

Amount

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in CM (1:3) or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but not exc 400 Sqcm in super facia area into or through brick walls built in mud mortar and making good in CM (1:3) or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

S&F of solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube in opening as per specification & drawing complete all as specified and directed.

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified and size of frame 105x60mm complete all as specified and as directed. Note : Cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame is deemed included in these items .

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified and size of frame 125x60mm complete all as specified and as directed. Note : Cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame is deemed included in these items.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded prelaminated colour PVC 'C' channel having a PVC shut strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail& bottom rail, panelling of prelamanited colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed.

S&F 35mm thick plain framed factory made panelled shutter 2nd class HW rail and style with lock raid and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kitn seasoned and chemically pressure treated including preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 35 mm thick factory made glazed and skelton shutters 2nd class HW open rebated and prepared to receive gauage (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead for security glass etc. Size of members of shutters as spd in IS 1003 supplied and fitted to chowkhats all as specified and directed into squareincluding preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F, Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded and Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F, Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

Supply and fixing GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed.

M&L Sheet glass figured quality and glazing with oil putty in square not exc 0.5 sqm in each pane 3 mm thick complete all as specified and as directed.

M&L Plain Sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane 3 mm thick complete all as specified and as directed.

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and as directed.

S&F 18 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws ,solvent cement/adehesive to make kitchen cabinet partion, shelves, shutter, drawer etc complete as per specificcations and as directed by Engr-in-Charge.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt extruded section complete all as specified and as directed.

S&F Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size fixed with screw complete all as specified and as directed.

S&F Magnate catcher of metal body and striking plate heavy duty includind fixed with screw complete all as specified and as directed by Engr-in-Charge.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvenised of not exc 25 mm flaps complete all as specified and as directed.

S&F Aluminium alloy anodised sliding door bolt of 250mm with haps, staple ( bolt type ) & fixing clips of sheet etc complete all as specified and as directed.

S&F of 250 mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate(ISI marked) complete all as specified and directed.

S&F Aluminium butt hinges of 100mm size type C-22 complete all as specified & directed.

S&F MS 150 mm ordinary rat tail springs plate type incl.rollar plate etc complete all as specified and as directed.

S&F Extruded aluminium alloy handle of 125mm size fabricated type, anodised complete all as specified and as directed.

Taking down existing tarfelt from roof and removing from site complete all as specified and as directed.

M&L for 10 mm thick rendering in CM (1:4) over roof ,surface finished even and rough mixed with water proofing compond complete all as specified and as directed. Note : Water proofing compound shall be measured and paid under separate item.

M &L For applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.4 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) land on primed surface by torch application complete all as specified and as directed by Engineer-in-Charge.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, PCC tiles at roof etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L precast cement concrete tiles of size 250mm x 250mm x 20 mm as in foor top, confirming to IS-1237-1980 laid over 15 mm thick screed bed in CM 1:4 and set, jointed and pointed in neat cement slurry in floors, and cut & polished between tiles 2 to 3 mm will be filled with cement mortar (1:2) by mixing of chemical or equilant approved by the GE etc complete all as specified and as directed.

M&L PCC (1:2:4) Type Bo using 12.5 mm graded stone agg as levelling course/mass concrete complete all as specified and as directed.

M&L Granite slab 16 mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 15 mm thick screed bed CM (1:6) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing all as specified and directed..

M&L for machine cut Kota stone slab 18 mm to 20 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed.

M&L for machine cut kota stone slab 18mm-20 mm thick as in riser / steps, skirting, dado, cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in Cement Mortar (1:4) complete all as specified and directed.

M&L non skid ceramic Coloured tiles, 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile and fixing with tile adhesive complete all as specified and directed.

M&L for ceramic tiles, joint free, coloured tiles 7mm to 8mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L12mm thick rendering with CM (1:4) mixed with WPC over brick/concrete could surface fair and even surface complete all as specified and as directed.

M&L10mm thick rendering with CM (1:4) over brick/concrete could surface fair & even surface complete all as specified and as directed.

Supply only Integral water proofing compound complete all as specified and as directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying three coats of white wash on ceiling surfaces complete all as specified and directed.

M & L two coat of oil bound distemper over a coat of Birla wall care putty on plastered surfaces on wall incl preparation of surfaces complete all as specified and as directed.

M&L applying for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

M&L applying for two coats of synthetic enamel paint over a coat of red oxide primer on old steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and applying two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls complete all as specified and dircted by Engr-in -Charge

Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed by Engr-in-Charge.

Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for reinforced cement concrete (normal mix) (using 20mm graded aggregates) as in shelves etc complete all as specified and directed.

S&F TMT bars 6 to 8 mm dia cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and as directed.

M&L for precast concrete as in cover slab, lintel etc using RCC (1:2:4) with 20mm graded stone aggregate including all form mould etc complete all as specified and as directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and as directed.

Supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI) marked, concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge .

Supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge .

S&F in repairs 110mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F 75 in repairs mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed in Wall/laid in floor complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes bends any radius with acces door complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) pipes bends any radius with acces door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes junction, single (single T/Y) equal or unequal any radius with acces door complete all as specified and as directed.

S&F PVC (SWR) vent cowl for 110mm dia pipe complete all as specified and as directed.

M&L 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as in repair complete all as specified and as directed.

M&L PVC (SWR) gully trap 125 /100 plain with grating including jointing with solvent cement as in repair complete all as specified and as directed.

Supply only 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor complete all specified and directed.

S&F in repair 15mm angle cock chromium plated,cast copper alloy with capston heads, scewed down high pressure, with or without lettered 'Hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F in repair 15mm stop valve screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions and complete all as specified and as directed.

S&F in repair 15mm, bib tap fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed complete all as specified and as directed.

S&F 15mm, pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads, scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and as directed.

S&F in repair shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed.

S&F of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet (exluding flushing cistern and flush pipe) including lime concrete bedding, complete all as specified and directed.

S&F of 1st quality vitreous china wash hand basin, white flat/angle back, size 550 x 400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size complete all as specified and directed.

S&F 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 60cm long and 12cm wide with CP bracket guard and railing 60 cm long complete all as specified and as directed by Engr-in-Charge.

S&F Soap dish of CP fixed with PVC rawal plugs and screw complete all as specified and as directed by Engr-in-Charge.

S&F 20mm dia, D type towel rail 600 mm long and wall bracket made of cast copper alloy, chromium plated complete all as directed by Engr-in-Charge.

S&F stainless steel peg set of six fixed to wall with PVC plugs and screw complete all as specified and as directed.

S&F PVC bath room cabinate mirror of Size 500mm x 400mm complete all as specified and as directed by Engr-in-Charge.

S&F in repair Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete all as specified and as directed by Engr-in-Charge.

Dismantling water tanks of any description and in any position of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F rotational moulded polyethylene triple layered antibactrial film water storage tank (cylinderical vertical) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 15mm-142gms/ 20 mm-210 gms / 25mm-455gms / 40mm - 690 gms) complete all as specified and as directed.

S&F in repair 20mm bore gun metal globe / gate value with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in replacement of stainless steel kitchen plate rack made out of 1mm thick sheet of size 785mm x 760mm and 250mm deep, weight not less than 7 Kg complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste coupling, waste pipe including bedding in CM to dwarf wall or including fixing cantilever brackets and connections to pipe over all size 915mmx460mm bowl size 410mmx330x160mm complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and avg 15 cm deep and getting out in any type of soil complete all as specified and as directed.

M&L PCC Type D2 (1:4:8) using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and as directed.

S&F Machine pressed precast Coloured concrete Tile .( Rubber mould casted Glossy finish) size 300x300mm of 25mm thick over 20mm thick CM (1:6) screed bed complete all as specified and directed.

Demolition of cement concrete /brickwork of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone aggregate as in plinth protection etc surface even and smooth without using extra cement complete all as specified and as diected by Engineer-in-Charge.

M&L for 15 mm thick dubbing coat in Cement Mortar (1:4) on ceiling surface complete all as specified and directed.

S&F small fittings such as brackets of any type latch and hinges blocks shaped door and window stops including all necessary labours articals nexc 200 cu.cm each of IInd class HW complete all as specified and directed.

M&L prepartion of New/Old plastered surfaces of walls ,chajjas and applying two coats of weather proof water based emulsion paint (Acrylic paint exterior grade )complete all as specified and directed by Engineer-in-Charge.

S&F floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring, 125 mm long fixed in floor complete all as specified and as directed.

M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of not exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed.

Excavation in post hole each nexc 0.5 cum getting out returning filling with earth around in layers nexc 25cm with soil complete all as specified and as directed.

M&L Mild steel Angle iron for fencing post & strut in fencing & flat iron fillets (for securing wire mesh) including cutting tops to shape as directed all necessary drilling, bolting or riveting etc and similar work conforming to FE-290 Gde E-165 complete all as specified and as directed.

S&F mild steel Plain bars 10mm dia & over as in reinforcement, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding with MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified & directed (as in Horizontal Bar of Fencing)

Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed. Note : Supply only chain link fencing will be measeured and paid separetly.

Supply only, chain link fencing of MS galvanized fencing, any size or type complete all as specified and approved by GE.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 10cm but n.exc 20cm long and dia of neck 11 to 15mm complete all as specified and as directed.

M&L two coat of synthetic enamel paint over coat of red oxide primer over new steel surfaces nexc 10 cm width or girth complete all as specified and as directed.

S&F mild steel framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe-310-0 complete all as specified and as directed.

M&L Rolled section as in Rafter purlins, strut etc using MS angle FI or hollow square section etc including cutting welding nut bolt etc complete all as specified and as directed.

S&F Pre painted galvalume sheet 0.50 mm thick having aluminum zinc coating 150 gm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as directed by Engr-in-Charge.

Taking down carefully existing aluminium/copper point wiring (light, fan,socket or power point) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting,ceiling fan etc to be measured seperately) removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of walls, floors, ceiling etc all as specified and directed.

Taking down main switches/MCB DBs of any capacity/type including MCBs complete all as specified and as directed.

Taking down and servicing/greasing/painting of ceiling fan/ exhaust fan of any size and refixing in position including provision 3 core flexible PVC insulated multi stranded copper conductor of size 0.5 Sqmm from ceiling rose/ connector to fan with replacement of capacitor complete all as specified and directed.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of med grade of not less then 20mm dia with all fitings and accessories including factory made MS/ pressed steel terminal flush modular metal boxes with zinc coated duly concealed in wall reqd as per site reqmt for mounting modular switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified and directed :- Make of Wire : Finolex / Plaza / Polycab Make of Conduit : Anchor / Modi / Presfit.

One light point controlled by one switch.

One light point controlled by 2- two way switch

One fan point controlled by one switch

One Bell/Buzzer point controlled by one way 5 Amp push button switch.

One 5 pin socket out let 5 amps on same board complete.

One 5 pin socket out let 5 amps on independent board complete.

All as per item No 115 here in before but with cable 2.5 sqmm (nominal area) multi stranded ERLS copper wire unsheathed for one 5 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 1.5 sqmm FRLS copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed. Make of Wire : Finolex / Plaza / Polycab. Make of Conduit : Anchor / Modi / Presfit.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified and directed. Make : Anchor / Roma / Cona / Leader

S & F modular white cover plate with frame of 12/8 module complete all as specified and directed. Make : Anchor / Roma / Cona / Leader.

S & F modular white cover plate with frame of 02 module complete all as specified and directed. Make : Anchor / Roma / Cona / Leader.

S & F modular white cover plate with frame of 03 module complete all as specified and directed. Make : Anchor / Roma / Cona / Leader.

S&F Modular switch 1 way 06 amp single pole complete all as specified and directed. Make : Anchor / Roma / Cona / Leader

S&F Modular switch 2 way 06 amp single pole complete all as specified and directed. Make : Anchor / Roma / Cona / Leader

S & F modular switch socket combination 16A, 6 Pin of 3 module complete all as specified and directed. Make : Anchor / Roma / Cona / Leader

S & F of modular socket outlet 6A-5 pin combined of 02 module complete all as specified and directed. Make : Anchor / Roma / Cona / Leader

S & of moduar bell push 6 Amp 1 module complete all as specified and directed. Make : Anchor / Roma / Cona / Leader

S & F of modular fan step regulator 120 W-2 module complete all as specified and directed. Make : Anchor / Roma / Cona / Leader

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed. Make : Anchor / Roma / Cona / Leader

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings incl LED Bulb 12W/14W complete all as specified and directed. Make of Lamp Holder : Anchor Roma, Cona, Leader. Make of LED Bulb : Philips, Wipro, Havells.

S&F energy saving 10W LED 6000K surface/recess mounted luminaire fittings complete all as specified and as directed. Make : Halonix / Havells / Wipro.

S&F Ultra bright LED Tubelight with suitale for Regal Batten for LED Tube of 22W incluing req length of 1.5 Sqmm PVC multistranded copper conductor ro electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. Make : Halonex / Havells / Wipro / Bajaj.

S&F security light fittings better optics for uniform distribution IP 65 protection LED of 25 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 6 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. Make : Halonex / Havells / Wipro / Bajaj / Crompton.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (Note : (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed. Make :- Legrand/Havells/Schnider,

S&F, MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. Make :- Legrand/Havells/Schnider,

S&F MCB SP 240 volts, 6 to 32 Amps, 'B' series 10 KA including connection with suitable size copper lugs complete all as specified and directed. Make of MCB & MCB DBs : Schnider, Legrand, Havells.

Supply, install, commissioning and installation of distribution meter box indoor type, factory made out of CRCA sheet 2mm thick with angle iron 30x30x2 mm complete with inside, outside powder coated independed housing for meters with transperent glass & rubber gasket packing with suitable size copper single/ two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbar (for outgoing) duly insulated (including self insulated) maintaining proper space for each busbar and grouting panel in wall etc complete including locking arrangement and comprising for following fittings including taking down existing MCB DB TPN 4 way complete all as specified and directed :- (a) MCCB TPN, 63 Amps ,16 KA - 01 No (For incoming) (b) Amp Meter (0-100 Amp) - 01 Nos (c) Volts Meter (0-500 Volts ) - 01 No (d) Indicator Lamp set of three R,Y,B - 01 Set (e) ASS & VSS with CTs - 02 Nos ( 01 Each) (f) MCB SP 40 Amps, 230 volts - 04 Nos (For outgoing) (g) Nutral bus bar link mounted on insulator. (h) Place for fixing the energy meter - 04 Nos (i) The quoted rate is inclusive of removing the existing electric meter from the building and re fixing the same in the sheet metal enclosure at the same location without any damage to the meter. Make of MCB & MCB DBs : Schnider / Legrand /Havells.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area of size 25 Sqmm 4 Core complete all as specified and directed. Make : Polycab / Havells/ Gloster / KEI .

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.

M & L High density polyethylene pipes (HDPE) 80mm dia of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed. Make : Kisan / Supreme / Finolex.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. Make : Tata / Jindal / Swastik / Prakash

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe of any required length complete all as specified and directed.

M.S. ENGINEERS

M/s Shri Diwakar Singh

lodhi builders

Babatia super works

GURU KIRTH BUILDERS