GE/S(U)-56/2020-21 SPECIAL REPAIR OF BLDG NO P-02 (DSC GD ROOM) AT SIGCEN OF NCSR ADDN/ALTN TO ROOM AND ALLIED WORK IN BLDG NO NP-97 AT CP COLONY PROVN OF TOE WALL WITH DRAIN FOR BLDG NO NP-10 AND NP-12 AT HQ NC AND CERTAIN REVENUE WORKS AND MINOR WO

Amount

Taking down chowkhats or frame with shutter (without taking of shutter off shutters from frame) 1.5 sqm not exceeding 4 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking of shutter off shutters from frame) not exceeding 1.5 Sqm each complete all as specified and directed.

Dismantling framed work timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed.

Demolition cement concrete in ground floors and paving (unreinforced) not exceeding 15 cm thickness (below or above ground floor) complete all as specified and directed.

Dismantling AC/semi AC corrugated sheet as in roof covering complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pilars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:6 complete all as specified and directed.

Mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Pre painted galvalume aluminium zinc coating GI based Corrugated steel sheet 0.50 mm thick crimpted/tapard at the external end slop of any colour having tansile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and directed.

Plain galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick in ridges, hips, valley gutters at the external end slop of any colour having tansile strength 550 Mpa as in roof (ridges) covering fixed with self tapping screws and caps etc complete all as specified and directed.

Mild steel screw bolt (machine made) 11 to 15 mm dia with hexagonal or square heads at one end and screw the other or screwed both end to be fitted with washers and one hexagonal or square not exceeding 10 cm and not exceeding 15 cm long complete all as specified and directed.

Rolled section Fe-410-W (Gde-E-250) quality-A as in main and cross beams, hip and jack rafters, purlins where connected to comman rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed.

Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including brushing neat cement slurry @ 3 Kg/Sqm complete all as specified and directed by Engr-in-Charge.

Screed bed or bedding layers of 15 mm thick cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Backing coat of cement mortar 10 mm thick in 1:3 to receive tiles in vertical surfaces complete all as specified and directed.

Providing 100 mm thick, plain cement concrete type B-1, (1:2:4) (using 20 mm graded aggregate) as in sub base of floors complete all as specified and directed.

25 mm thick PCC type B-0 (using 12.50 mm graded aggregate) as in sub base for receiving floor finishes complete all as specified and directed.

Non skid light/dark coloured, white printed tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm and 7 mm thick in floors etc set and jointed in neat cement slurry pointed in white or coloured cement to match complete all as specified and directed.

All as per ser item No 18 but skairting/dado complete all as specified and directed.

Non skid light coloured, white printed tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm and 7 mm thick in floors etc set and jointed in neat cement slurry pointed in white or coloured cement to match complete all as specified and directed.

7 mm thick non skid coloured ceramic tiles (area of each tile exceeding 0.08 sqm and not exceeding 0.11 sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments complete all as specified and directed.

Glazed ceramic tiles of size 350 mm x 250 mm x 7 mm/450 x 350 x 7 mm thick coloured tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the existing surface complete all as specified and directed.

Screed bed or bedding layers of 20 mm thick cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Machine cut kota stone slab flooring 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabe including rubbing and mirror polishing complete all as specified and directed.

20 mm thick makrana white marbe tiles machine cut in floor laid over cement screed and jointed with white cement slurry including cutting and polishing of type complete all as specified and directed.

Use & waste of form work soffits of suspended slab such as roof slab, floor slab, chajja and similar work not exceeding 200 mm thick complete all as specified and directed.

Reinforced cement concrete type B-1 (using 20 mm graded crushed stone graded aggregate) work as in slabs supported on walls, beams deck slab and in shelves and the like complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per ser item No 29 above but 6 mm to 8 mm dia as in stirrups complete all as specified and directed.

Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polisheing types complete all as specified and directed.

Moulding rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations half or full round complete all as specified and directed.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet/ wood grain printed colour PVC sheet reinforced with MS Tube complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wooden grain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of wooden grain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

100 mm long stainless steel butt hinges for any type complete all as specified and directed.

Aluminium handles cast type anodised 100 mm long complete all as specified and directed.

75 mm thick plain cement concrete, type C-1, (1:3:6) (using 20 mm graded aggregate) as in plinth protection complete all as specified and directed.

Pressed steel frame size 125 x 60 mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed.

105 x 60 mm pressed steel frames for doors with one or more rebate including necessary fixing lungs, hinges lock strike plate etc complete all as specified and directed including a coat of shop coat zinc chrome primer.

Providing cement concrete 1:3:6 type C-0 (using 12.5 mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed.

35 mm thick second class hard wood plain framed pannelled shutter (two panels) with lock rail and pannel or 12 mm venered particle board with comerical face venering on both faces. The size of rail and style as per IS-1003 part kilin seasoned complete all as specified and directed.

Glazed and skeleton shutters 35 mm thick 2nd class hardwood, open rebated and preared to receive glass, guaze etc. (without sash bars) edges of framing plaing chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) sulied and fitted to chowkhats complete all as specified and directed.

300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

All as per ser item No 44 but wire gauge shutters complete all as specified and directed.

4 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium staples complete all as specified and directed.

2nd class softwood clean sawn as in scantling fixed with nails exceeding 13 Sqcm and not exceeding 25 Sqcm in section complete all as specified and directed.

18/19 mm thick ISI, termite proof, chemically well pressed, prelaminated particle board exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinetstand cup boards etc. includimg 6 mm thick teak wood beading all around including dismantling old cup board complete all as specified and directed. Make - Win Tuff or its equivalent.

All as per ser item No 50 above but 12 mm thick complete all as specified and directed by Engr- in-Charge.

40 mm dia, cupboard knob fixed with nut, screw and washer of mild steel, brass polished bright bright finished complete all as specified and directed.

Butt hinges 75 mm sizes, medium weight, extruded aluminium alloy with galvanised mild steel hinge pin anodised type C-22 complete all as specified and directed.

Hasp and staple size 100 mm powder coated with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Mild steel hold fasts wind ties etc and similar small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

50 mm long butt hinges medium weight and fixed complete all as specified and directed.

Steel locking bolt with mild steel electro galvanised plate and bright bolt not less than 10 mm dia 100 mm size complete all as specified and directed.

100 mm long butt hinges medium weight and fixed complete all as specified and directed.

Aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised barrel tower bolt of extruded section and fixed length of bolt 100 mm complete all as specified and directed.

Aluminium handle, cast type anodised size of handle 150 mm complete all as specified and directed.

Mild steel 300 mm, ordinary rat tail rod pattern springs includding roller and roller plate in repair complete all as specified and directed.

2nd class hard wood small fittings shaped door and windows stops including all necessary labour article not exceeding 20 Cum each complete all as specified and directed.

Two coats of distemper oil emulsion over a coat of primer including preparation of old plstered surfaces of walls complete all as specified and directed.

One coats of distemper oil emulsion over a coat of primer including preparation of old plstered surfaces of celing complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

10 mm thick rendering in cement mortar (1:6) on other than fair face of brick or concrete surface complete all as specified and directed.

15 mm thick rendering in cement mortar (1:4) on other than fair face of brick or concrete surface complete all as specified and directed.

5 mm thick rendering on fair faces of concrete finished even and smooth without using extra cement in cement mortar 1:3 complete all as specified and directed.

Two coats of oil bound distemper emulsion over a coat of primer including preparation of new plstered surfaces of walls complete all as specified and directed.

Applying two coats of cement based paint over a coat of primer preparation of new plastered surfaces complete all as specified and directed.

Applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

Applying three coats of white washing on ceiling including preparation of old plastered surfaces complete all as specified and directed.

Preparation of old painted plastered surfaces of walls of any description, over 10 cm girth or width including cornices and applying one coat of Acrylic weather proof exterior emulsion paint complete all as specified and directed.

Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer over 10 cm width or girth complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm idth or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer complete all as specified and directed.

Taking up or down 20 mm bore pipes steel tubing and connections complete all as specified and directed.

Cutting chases in brick wall, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

GI pipe medium grade 20 mm bore in wall and ceiling or laying in floors, including new fittings as required at site complete all as specified and directed.

Taking up or down of 15 mm bore pipes steel tubing and connections complete all as specified and directed.

GI pipe medium grade 15 mm bore in wall and ceiling or laying in floors, including new fittings as required at site complete all as specified and directed.

Vitreous china wash basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, flush pipe, cutting for and pinning in ends of bracket or erecting stand as in repair complete all as specified and directed. Make : CERA or equivalent.

10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets as in repair complete all as specified and directed.

WC Orissa pattern size 580 x 440 mm white with integral foot rest excluding flushing system including P or S trap fixed as in repair complete all as specified and directed. Make : Hindware/ Parryware/CERA.

15 mm bore pillar tap, fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule fixed as in repair complete all as specified and directed.

15 mm bore bib taps, long body with wall flange with arreator fency type chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule fixed as in repair complete all as specified and directed.

Concealed stop cock with fancy type chromium plated with long shank and cup (Concealed type) sheet flange cast copper alloy, screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions fixed as in repair complete all as specified and directed.

15 mm dia 600 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer fixed as in repair complete all as specified and directed.

32 mm dia PVC waste pipe fixed as in repair complete all as specified and directed.

Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union as in repair complete all as specified and directed.

Chromium plated shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of chromium plated including fixing to steel pipe or union as in repair complete all as specified and directed.

Chromium plated stop valves of 15 mm bore, with adjustable wall flange as in repair complete all as specified and directed.

Towel rail 600 mm long of chrome plated fixed with and including chromium plated brass screws and cleats as in repair complete all as specified and directed.

32 mm dia bottle trap PTMT having minium water seal 25 mm (Minimum weight 260 gram) as in repair complete all as specified and directed.

Rolled mild steel work of angle iron as in frames of doors, Cup Board and tank staging etc confirming to grade Fe 410-W or Fe-250-O complete all as specified and directed.

4 mm dia galvanised steel wire, 150 x 100 mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed.

MS drapery rod 20 mm dia powdered coated including brackets and necessary fitting including removal of old one complete all as specified and directed by Engr-in-Charge.

Wooden finish bracket single holders for curtain rods (matching with curtain rods with end stops as approved and complete all as specified and directed.

50 mm bore cast iron soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints fixed to wall complete all as specified and directed.

Cast iron cowl suitable for pipes of 50 mm bore complete all as specified and directed.

75 mm bore cast iron soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints laid in floor complete all as specified and directed.

75 mm bore cast iron soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and directed.

Cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 75 mm bore fitted with oval access doors complete all as specified and directed.

Cast iron bends (any radius), with duck's foot or heel rest 75 mm dia complete all as specified and directed.

Cast iron floor trap with dia of outlet 75 mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified and directed.

Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 75 mm pipe complete all as specified and directed.

100 mm bore cast iron soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed.

All as per ser item No 109 but fixed to wall complete all as specified and directed.

100 mm cast iron sanitary connections short connections pipe of length upto 300 mm complete all as specified and directed.

Cast iron branch pieces, double (equal of unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm bore fitted oval access door complete all as specified and directed.

All as per ser item No 112 but single complete all as specified and directed.

Cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore fitted with oval access doors complete all as specified and directed.

Cast iron bends (any radius), with duck's foot or heel rest 100 mm dia complete all as specified and directed.

Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 100 mm pipe complete all as specified and directed.

150 mm/100 mm size gratings of PTMT but with waste hole (minimm weight of 100 gms) complete all as specified and directed.

Dismantling of 500/1000 ltrs capacity water tank of any description including all connection and removing from site complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 1000 Ltr capacity (cylindrical veritcal with closed top) with threaded cap hoisted and fixed in position complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm bore pipe and fixed (Minimum weight 142 gms) fixed as in repair complete all as specified and directed.

Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc. complete all as specified and directed.

Providing plain cement concrete (1:2:4) type B-0 (using 12.50 mm graded aggregate) as in repair to paiding to roof, water troughs and the like including weathering, slightly to ascertain the proper slop complete all as specified and directed.

Providing plain cement concrete (1:3:6) type C-0 (using 12.50 mm graded aggregate) as in repair to roof kerbs or mud stops, chamfered on edges etc to ascertain the proper slop complete all as specified and directed.

Brushing neat cement slurry mix with bouding chemical and 3.0 kg of cement per sqm remove dust etc. complete all as specified and directed.

Rendering 15 mm thick in (1:3) cement mortar on RCC roof and beam surfaces mixed with WPC complete all as specified and directed. (WPC masured & paid in saperately)

Supply only Water proofing compound (WPC) complete all as specified and directed.

Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and laying 3 mm thick polymeric waterproofing membrane of 3.5 Kg/ Sqm and bonded completely to the surfaces with overlap of 10 cms (with torch application) and overlaps are to be sealed by flame torch and applying one coat of IWL Aluminium paint complete all as specified and directed. Make : STP/IWL or equivalent

Applying two coats of water proofing coating system by applying shalicry - 215 of STP ltd/Rain coat 601 of Dr Fixit/Barrier coat of Araldite Ltd. over a coat of respective primer including prepariation of plaster surfaces or complete removal of existing treatment filling up of all cracks with approved crack fillers complete all as specified and directed.

Priming the sunken floor surface with bitumenous primer confirming to IS-3384 @ 0.3 litres/Sqm and applying a coat of hot blown bitumen confirming to IS-702 @ 1.2 kg/Sqm and thereafter supply and laying Polymeric membrane, five layered, of weight not less than 3 kg per Sqm with centre layer core of 90 micron high molecular density polethylene film and bonded completely to the surface with end overlap of 15 cm and side lap of 7.5 cm (Overlap to be thermo fused by flame) followed by another coat of semi h and blown 85/25 grade bitumen @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm complete all as specified and directed. Note :- Water proofing treatment will be done by IWL or through a specialized agency with will further have to give a five years warranty for rectification of any defect if inurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labor.

Powder coated anodised aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing and including rubber gasket for fixing glass panes etc. complete all as specified and directed.

Powder coated aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. complete all as specified and directed.

Extruded aluminum powder coated handles, fabricated type 75 mm size complete all as specified and directed.

All as per ser item No 132 but collapsible type complete all as specified and directed.

Butt hinges 75 mm size, powder coated aluminium alloy with galvanised mild steel hinge pin anodised type C-21 complete all as specified and directed.

PCC type D-2, 1:4:8, (using 40 mm graded crushed stone aggregate) as in sub base, mass concrete complete all as specified and directed.

Providing 50 mm thick cement concrete (1:3:6) type D-1 (using 20 mm graded aggregate) as in sub base for hard paved area complete all as specified and directed.

Lacquar coated Chequered glosy tiles 30 cm x 30 cm x 20-25 mm thick, set jointed and pointed in neat cement slurry as in path with white cement and pigment etc. complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard and dense soil complete all as specified and directed.

Hardcore of broken stone or boulders of gauge not exceeding 63 mm and deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Sand cushioning/filling under gloors or laying interlocking tiles complete all as specified and directed.

Machine pressed precast concrete interlocking paver blocks lacquor finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

Kerb stone of 300 x 300 x 10 mm thick precasted plain cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) including earth work for laying kerb stones complete all as specified and directed.

Removing excavated soil to a distance exceeding 50 m and not exceeding 1.50 km out side defence land complete all as specified and directed.

Excavation in trenches not exceeding 10 Sqm on plan, not exceeding 1.5 m deep and not exceeding 1.5 m wide, getting out in any type (hard/dense) of soil complete all as specified and directed.

Brick work with sub class 'B' bricks exceeding 6 m mean radius straight or curved on plan built in cement mortar 1:4 complete all as specified and directed.

Brick work with sub class "B" bricks straight or curved on plan to any radious in half brick thick wall in cement mortar 1:4 complete all as specified and directed.

PCC type B-1 (1:2:4) (using 20 mm graded cushed stone aggregate) as in coping, haunching benching and the like including form work complete all as specified and directed.

PCC type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in surface channel and drain beads including all necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms moulds, mitered /stopped ends etc. complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Concrete 1:3:6 type C-2 (using 40 mm graded aggregate) as in bed to 150 mm drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for complete all as specified and directed.

Salt glazed stone ware drain pipe 150 mm bore in trenches and jointed complete all as specified and directed.

Precasted RCC 1:2:4 type B-1 (using 20 mm graded aggregates) for precast cement concrete slabs as in drain/manhole covers set in cement mortar 1:4 complete all as specified and directed. Note : Slab covers shall be floated with surface vibrator and over turfed base, arrandement for turfed base has to be from contractors side.

Framed work as in frames to manhole covers of angle or other section including hold fast confirming Fe-410-O complete all as specified and directed.

Dismantling old abondoned existing manholes any depth with debbris and making good to earth complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thickness complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Cutting in to existing manhole or boundary wall for connecting new drains,making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation etc or similar work and gating out in any type of soil complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in channels and drains, foundation, haunching and benching and similar work etc. complete all as specified and directed.

PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in coping, benching and similar work etc. including necessary form work complete all as spcified and directed.

Precast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) for drain cover, manhole cover septic tank covers slabs etc. including necessary form work and set in CM (1:4) complete all as specified and directed. Note :- reinforcement will be measured and paid seperately.

MS flat iron as in wind ties etc. confirming to Fe 410-0 or Fe 310-0 including clamps complete all as specified and directed.

Preparation of surfaces on old wooden surfaces applying one coat of synthetic enamel paints over a coat complete all as spcified and directed.

Preparation of surfaces on old steel surfaces applying one coat of synthetic enamel paints over a coat of primer complete all as spcified and directed.

1.25 mm thick plain black mild steel sheeting in ridges hip, valley gutters drip and gutters and straight flashings (Length and girth as fixed) in repair complete all as spcified and directed.

PCC 1:2:4 type B-1 (using 12.5 mm graded aggregate) as in level course on roof surface 25 mm thick etc. complete all as specified and directed.

Rendering 20 mm thick on fair faces of brick or concrete surfaces in cement mortar (1:4) finished even and smooth complete all as spcified and directed for receiving roof treatment.

Applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide modified polymeric five layered APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polythylene film. Minimum weight of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm blinded with fine sand in dry condition @ 0.5 kg/sqm including two coats of bituminious aluminium paint complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, frame etc. complete all as spcified and directed.

Providing false ceiling GI frame work for seamless ceiling comprising of GI perimerter channel 0.55 mm thick with two unequal flages of 20 to 30 mm and web of 27 mm fixed to surrounding wall using screws at 452 mm C/C channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm C/c with GI cleat and steel expansion or sutable hanging from soffits\trusses\bracking supporting hanger compressing of GI wire complete all as sepcified and directed by Engr-in-Charge.

4 mm thick 600 x 600 mm size E-boards designer ceiling (Make: Everest of equvalent), fixed to GI grid work with screws and applying new surfaces two coat of distempers and one coat of primers complete all as spcified and directed.

Dismantling of cast iron or reinforced concrete drain pipe 100 mm dia and below jointed in cement mortar and taking out of floor/walls etc. complete all as spcified and directed.

110 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall complete all as spcified and directed.

110 mm PVC (SWR) bends any redius with access door complete all as spcified and directed.

110 mm PVC (SWR) branch piece, (singal Y) equal or unequal with access door complete all as spcified and directed.

75 mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed.

75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall complete all as spcified and directed.

75 mm PVC (SWR) bends any redius with access door complete all as spcified and directed.

75 mm PVC (SWR) T any redius with access door complete all as spcified and directed.

PVC (SWR) gully trap 125/110 mm, settting and jointing with solvent cement in repair complete all as spcified and directed.

110 mm PVC (SWR) vent cowl complete all as spcified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in postion etc. exceeding 250 ltrs and not exceeding 500 ltrs complete all as spcified and directed.

20 mm ball valve high pressure with polythylene float valve and fly nut complete screwed for iron pipe PTMT complete all as spcified and directed.

Gun metal globe or gate valve 20 mm, with iron wheel head screwed both ends for iron pipe and loud in repairs complete all as spcified and directed.

Cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggargate) as in coping, benching cills, PCC gola, seismic and other similar bands and the like including weathering sliglitely rounded or chamfered angles and throating including necesary formwork and filling gap between roof sheet and wall and exposed sufrace will be fair ans smooth finsihed complete all as specified and directed by Engr-in-Charge.

Preparing new/old plastered surfaces of wall surfaces and applying two coats of cement base paint over coat of prime complete all as spcified and directed.

Complete removal of existing treatment and applying two coats of oil bound distemper over a coat primers with two coat of wall care putty complete all as spcified and directed by Engr-in-Charge.

Excavation over areas not exceeding 1.5 M deep and getting out in Soft/Loose/Rock Soil complete all as spcified and directed.

PCC 1:4:8 type B-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as spcified and directed.

Walling of random rubble square/rectangular coursed well bonded bedded and solidly hearted bult in CM 1:4 complete all as spcified and directed.

Raised pointing to square/rectangular coursed of brought upto courses in CM 1:4 complete all as spcified and directed.

PVC (SWR) pipes 110 mm Dia single socketed in any length with rubber joints laid in tranches, floor and similar work complete all as spcified and directed.

Precast cement concrete 1:3:6, type C-1 bond stones Set in CM (1:4) complete all as spcified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40 mm to face stones and dressing of face beds and joints, as specified, of square/ rectangular coursed or brought up to courses complete all as spcified and directed.

Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium staples as in repairs complete all as specified and directed.

75 mm thick PCC 1:4:8 type B-2 (using 40 mm graded aggregate) as in sub base of floor etc. complete all as specified and directed.

25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in level course on floor etc. complete all as specified and directed.

15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and directed.

Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per ser item No 200 above but in skriting/ dado work complete all as specified and ditected.

16 mm to 18 mm green marble stone slab as in flooring set and jointed in neat cement slury and pointed with white or colored cement polishing complete all as specified and directed.

50 mm thick PCC type B-1 1:2:4 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and directed.

15 mm thck rendering on fair faces of brick works in cement mortar 1:6 finished even and smooth without using extra cement in cement mortar complete all as specified and directed.

Preparation of new plastered or un-plastered surfaces and walls including cornices, pilasters etc. and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Complete removal of existing treatment applying two coat of cement base paint over a coat of primer paint on walls complete all as specified and directed by Engr-in-Charge.

Preparation of new plastered or un-plastered surfaces and walls applying three coat of white wash on walls surfaces complete all as specified and directed by Engr-in-Charge.

Taking down frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm Each including iron mangery complete all as specified and directed.

Taking down frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm Each including iron mangery complete all as specified and directed.

35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type complete all as specified and directed.

Preparation of new wooden surfaces of any description, not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of primers complete all as specified and directed.

Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt complete all as specified and directed. (ISI Marked)

150 mm length aluminium handles fabricated type anodised complete all as specified and directed.

3 mm thick glass sheet oridinary quality in steel or wooden frames complete with fixing materials such as putty, glazing pins, wooden beads etc. complete all as specified and directed.

Galvanished mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperature 1.18 mm complete all as specified and directed.

75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base floor complete all as specified and directed.

Vitrified ceramic tiles (Double charge), polished, area of each tile exceeding 0.35 Sqm but not exceeding 0.42 Sqm, 10 mm thick (square or rectangular) of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the dark shade/any shed of tiles complete all as specified and directed.

All as per ser item No 217 above but in vertical surfaces such as skirting/dado etc complete all as specified and directed.

Non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/ backing coat complete all as specified and directed.

Glazed ceramic coloured tiles of size 300 x 600 x7 mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile etc. complete all as specified and directed.

Powder coated 15 micron aluminium door of approved design complete all as specified and directed with all fixing arrangement including providing and fixing door handle, tower bolts, mortice lock 6 lever (Make - Harrison/Godrej) one on each door and aluminium Powder coated tower bolts 200 mm long (03 Nos on each shutters) and 5 mm thick tinted glass pane of glazed shutter along with aluminium glazing beading of size 19.00 mm x 17.5 mm x 0.70 mm @ weight of 0.097 Kgs per RM including rubber gasket on both side complete alongwith neoprene lining. The member shall be made out of extended aluminium sesction comprising of :- (Size of the door shall be as per site requirement) (a) Door frame of size 95.25 mm x 44.50 mm x 1.70 mm @ 1.301 Kg/RM.. (b) Shutter vertical member 85 x 44.50 x 1.56 mm @ 1.39 Kg per RM. (c) Shutter top member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM. (d) Shutter bottom member 101.60 x 44.50 x 1.60 mm @ 1.301 Kg per RM. (e) Shutter lock rail member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM. (f) 12 mm thick toughened coloured glass pan match to aluminium partition The actual measurement shall be taken, wastage shall be including in the rates, the above sections are from JINDAL/INDAL/HINDAICO/WALCO extruion. The contractor is at liberty to choose high section from approved make with minor variation in sizes and weight as approved. However nothing extra shall be paid for over size and over weight section also.

Anodised aluminium window/partition and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed.

12 mm thick toughened coloured glass pane ofr glazed fixing for aluminium partition/window complete all as specified and directed by Engr-in-Charge.

Water closet wall mounted pattern pattern colour in repair as approved and complete all as specified and directed by Engr-in-Charge. Make : Somany Cat Part No (EWC 120305) cistern 120714 Seat cover 121311 Twin flush cistern 120627) UNIEK.

WHB coloured 615 mm x 510 mm with pedestal complete all as specified and directed. Make : CERA CARNIVAL Cat Part No : (WHB 1009, PEDESTAL 1108)

Half stall urinal flat back (large) 635 x 395 x 420 white colour complete all as specified and directed. Make : CERA, Cat Part No : 5001

CP waste coupling 32 mm dia PTMT (half or full threaded) minimum weight 450 gms complete all as specified and directed.

PVC waste pipe 32 mm bore with cup and washers complete all as specified and directed.

15 mm bore centre hole basin mixer with round spout with 450 mm long copper pipes and brass nuts with out Pop up complete all as specified and directed. Make: Jaquar, Cat Part No : CON 167KNB

Self closing angle cock pressmatic for urinal with flange and 200 mm connecting pipe and spreader complete all as specified and directed. Make : Jaquar, Cat Part No : PRS 077

15 mm bore Bib tap complete all as specified and directed. Make : Jaquar, Cat Part No : CON-107KN

15 mm bore angular stop cock with wall flange complete all as specified and directed. Make : Jaquar, Cat Part No : CON- 059KN

PVC connection 15 mm bore 450 mm long Braided Hose with M10X1 Nipple, 15 mm Nut, O-Ring & Rubber washer (Suitable for Basin Mixers) complete all as specified and directed. Make : Jaquar, Cat Part No : ALD-803AB

PVC connection 15 mm bore 450 mm long Braided Hose with two 15 mm Nut & Rubber washer without nipple complete all as specified and directed. Make : Jaquar, Cat Part No : ALD-805B

Chromium plated toilet paper holder complete all as specified and directed. Make : Jaquar, Cat Part No : ACN 1153N

Glass shelf with chromium plated guard rails complete all as specified and directed. Make : Jaquar, Cat Part No : ACN-1171N

600 mm long brass chromium plated towel rail fancey type complete all as specified and directed. Make : Jaquar, Cat Part No : ACN-1111NM

Soap dish complete all as specified and directed. Make : Jaquar, Cat Part No : ACN 1131N

Double Coat hook complete all as specified and directed. Cat Part No : ACN 1161N

Complete removal of existing treatment and applying two coats of oil bound distemper over a coat primers with two coat of wall care putty complete all as specified and directed by Engr-in-Charge.

All as per ser item No 244 but on ceiling complete all as specified and directed.

Taking down carefully, copper/aluminum point wiring (light, fan, socket or power/LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc. and making good disturbed surfaces of walls floors and ceiling complete all as specified and directed. Keeping the LED lights in safe custody.

Point wiring for one light/fan/bell point controlled by one switch using 1.5 Sqmm FRLS copper conductor cables (multistranded) PVC insulated and unseathed in and including PVC concealed conduit (thickness not less than 1.5 mm and 20 mm dia), medium grade with Modular metal flush boxes thickness (1.25 mm) & PVC back plate for mounting modular type in adequate module of switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts copper conductor cable 1.5 Sqmm as earth wire stranded and conected to earth dolly complete all as specified and directed. Make: Havells/ Finolex/Polycab/L&T

All as per ser item No 247 but for 3 pin 6 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire and connected to earth dolly complete all as specified and directed.

All as per ser item No 247 but for 3 pin 6 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire and connected to earth dolly complete all as specified and directed.

All as per ser item No 247 but for 3 Pin 16 Amps socket outlet independent with cable 2.5 Sqmm including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire standard and connected to earth dolly complete all as specified and directed.

Two way switch 6 Amps, 1 Module (Modular type) 230 volts including taking down old one complete all as specified and directed. Make : Havells (Crabtree)/Legrand/Philips/Polycab.

Switch Piano flush type 6 Amps single pole one way (Modular Type) with outer strip complete all as specified and directed. Make: Havells (Crabtree)/ Legrand/Philips/Polycab.

Switch Piano flush type 16 Amps single pole one way (Modular Type) with outer strip complete all as specified and directed. Make: Havells (Crabtree)/Legrand/Philips/Polycab.

Socket combined 2-in-1, 3 Pin 6 Amps (Modular Type) with outer strip complete all as specified and directed. Make : Havells (Crabtree)/ Legrand/Philips/Polycab.

Socket combined 2-in-1, 3 Pin 6 and 16 Amps (Modular Type) with outer strip complete all as specified and directed. Make : Havells (Crabtree)/Legrand/Philips/Polycab.

Ceiling rose surface bakelite 3 terminals complete all as specified and directed. Make : Cona, Cat Part No : 2126/SSK Cat Part No : 572 or equivalent of make in Make: Havells (Crabtree)/Legrand/ Philips/ Polycab.

Electronic step type fan regulator 120 watt 230 volts 50 C/S deluxe modular type complete all as spcified and directed. Make : Havells (Crabtree)/ Legrand/Philips/Polycab.

Lamp holder pendent/batten/angular type insulated metal cased body with brass adeptor suitable for batten fitting complete dully fixed on suitable size of PVC block complete all as specified and directed. Make : Havells (Crabtree)/Legrand/Philips/Polycab.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make: Havells/ Schneider/Legrand/Siemens. Note - MCBs will be measured separately.

20 Watt E-Lite LED PRIDE PLUS NEO, ultra slim square profile LED Lighting fixture with extruded polycarbonate, enviornmental friendly, energy efficient ready to use pack complete all as specified and directed by Engr-in-Charge. Make : Havells, Cat Part No : LHEXACP7IN1W020 or equivalent to Philips/Wipro/Schneider/Polycab/ Seimens

Replacement of LED bulk head luminaire, 10 W (ENDURA RUGBY) Make : Havells Cat Part No : LHEOAOP7UZ6W010 or equivalent to Philips/ Wipro/Schneider/Polycab/ Seimens 230 Volts wall/surface mounted complete with with LED lamp 10 watt, with all accessories, pre-wired, including providing flexible copper wire, twin core cable complete all as specified and directed by Engr-in-Charge.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25 mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead complete all as specified and directed. Including taking down old sub main wire.

Replacement MCB Single Pole, 230 Volt, Raiting 6 to 32 Amps complete all as specified and directed. Make: Havells/Schneider/Legrand/ Siemens.

Replacement MCB Single Pole and Neutral, 230 Volt, Raiting 40 Amps complete all as specified and directed. Make: Havells/Schneider/Legrand/ Siemens.

Earthing complete with galvanised steel earth plate electode 600 mm x 600 mm x 6.00 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20 mm bore with funnel and wire mash and light grade GI protection pipe 15 mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board as specified and testing completion complete all as specified and directed.

Trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size complete all as specified and directed. Make - KEI, Finolex & Polycab. Note : Earth work and other connected work shall be measured & paid sperately. Make: Havells/Finolex/ Polycab/L&T

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and directed. Note : for payment purpose punned thickness shall be measured

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.

GI tubing light grade 40 mm dia along the wall/in trenches/in duct /in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed.

Point wiring for one light/fan/Exhaust Fan point controlled by one switch using 1.5 Sqmm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit (thickness not less than 1.5 mm and 20 mm dia), medium grade with Modular metal flush boxes & metal back plate for mounting in adequate module of switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sqmm as earth wire stranded and conected to earth dolly complete all as specified and directed. Make: Havells/ Finolex/Polycab.

All as per ser item No 270 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire and connected to earth dolly complete all as specified and directed.

All as per ser item No 270 but for 3 pin 5 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire and connected to earth dolly complete all as specified and directed.

All as per ser item No 270 but for 3 Pin 16 Amps socket outlet independent with cable 2.5 Sqmm including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire standard and connected to earth dolly complete all as specified and directed.

All as per ser Item No 270 but for one 3 Pin 15 Amps socket outlet independent with cable 4.0 Sqmm including copper PVC insulated PVC unsheathed 2.5 Sqmm earth wire standard and connected to earth dolly complete all as specified and directed.

Single pole and neutral enclosure surface mounted 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator complete all as specified and directed. Make : wipro/equivallent in Havells/Bajaj/Philips/ Schneider

Bell push 230 volts, AC complete all as specified and directed. Make: Havells/Legrand/Philips/ Polycab/L&T.

Call bell ding-dong 230 volts including taking down old one complete all as specified and directed. Make: Havells/Legrand/Philips/ Polycab/L&T

1 x 40 W Mini GLS E27 wall mounting SS finish fixture with textured glass diffuser suitable for mini GLS Lamp complete all as specified and directed. Cat Part No : LHJE04104499, Make: Havells or equivalent to Philips/Wipro/Seimens/ Polycab.

Geyser (Water heater) storage type, Electric 230V, SP, AC complete of capacity 25 Ltrs Cat Part No : GHWAMGTWH025 (White) Make: Havells or equivalent to Wipro/Recold/V-Guard Victo including all GI pipe connection (Gate valve, cutting T, inserting all type of Elbow, Nipple etc) and all necessary fixing arrangement on existing wall complete all as specified and directed.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately Make: Havells/ Schneider/Legrand/Siemens

New E-Lite LED Curve, high lumen batten with efficacy of 100 lumens in 20 W complete all as specified and directed by Engineer-in-Charge. Make - Havells Cat Part No LHEXBXPNIN1W020 or equivalent to Philips/Wipro/Schneider/ Legrand/ Polycab

Point wiring for one winter appliance point controlled by one switch with 2.5 Sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded copper cable over PVC casing capping (ISI marked) with 2.5 Sqmm multi stranded copper conductor cable (green color) as earth lead, to match with the existing specification complete all as specified and directed by Engr-in- Charge. Make - Havells or equivalent make in polycab/finolex

Replacement of Sheet metal enclouser single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one single pole MCB from 10 Amp to 20 Amp, 10KA complete all as specified and directed. Make : Havells or equivalent make in Legrand/Standard

Water heater storage (Geyser), 25 ltr capacity, Storage type with PVC/thermoplastic body, AC 230 V, 50 Hz, single phase, 5 star, BEE rating, pressure rating 8 Bar, steel/copper inner tank with glass liner/polymer or protective coating, with thermal cut off, On/OFF indication lamps, safety valve, including PVC felxible connection 450 mm long (set of two), installing in position and connected with proper electrical connection as required complete all as specified and directed by Engr-in-Charge. Make - Havells-NaZZ (GHWENZTWG025)

Cutting existing steel tubing 15 mm bore for alteration or addition, screwing existing steel tubing for altrn/addition or lenthening screw on pipe to form connection if necessary done in position without taking down complete all as specified and directed by Engr-in-Charge

15 mm bore GI pipe, medium grade galvanised, with all connected fittings and fixed properly with MS clamps complete all as specified and directed. Make - Jindal

Stop valves suitable for 15 mm bore, cast copper alloy screwed down with crutch, high pressure, butterfly handle, screwed both side, cromium plated, with long shank and cup (conclead type) complete all as specified and directed.

Bib cock with wall flange, long body, chromium plated of size 15 mm complete all as specified and directed. Make : Hindware (Classik) F-200011

jyoti parkash sharma

SINGH CONST CO

RAJ MOHD