job no 2418

Amount

HSR 8.32 (c)/ Scrapping (c) Cement plaster

HSR 8.33 (b)/ (b) Removal of old broken glass panes (any thickness or size, quality or description) from metal frames including punching or drilling out old glazing pins/clips.

HSR 11.28/ First class brick work laid in cement, stone dust (from crusher) mortar 1:5 in first story up to 4 meters above plinth level.

HSR 14.89/ Providing and fixing vitrified tiles of size 600x600mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJA-RIA, SOMANI, ORIENT, JOHNSONS & RAK

HSR 14.92 (b)/ Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (b) Size of ceramic Glazed tiles 300x450mm

HSR 15.6/ 12 mm thick cement plaster 1:5

HSR 16.52/ Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finish the surface to the required finish complete.

HSR 16.60/ Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work.

HSR 16.81/ Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K./ Birla make)

HSR 17.19 (i)/ Wire gauze deodar wood door and window shutters without springs housed in chowkats including chocks/cleats, iron hinges and screws, etc., complete fixed in position (excluding the cost of tower bolts and handles but including the labour for fixing the same) (i) 35 mm thick

HSR 17.24 (c)/ Supplying and fixing glass panes with deodar wood molding (c) 4 mm thick (glazing area above 55 sqm, but up to 84 sqm of each pane)

HSR 17.88/ Providing and fixing plastic laminated sheets thickness, not less than 1.5 mm (conforming to I.S. specifications), including cost of approved adhesive complete (a) Natural finish

HSR 17.90 (b)/ Factory-manufactured paneled door or glazed window, shutters of commercial hard wood, such as hillock, champ, chikrassy and chaplash, etc., (non-coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln-seasoned), with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete fixed in position ( excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) (b) 35 mm thick

HSR 18.12/ Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, grating frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position.

HSR 30.4 (a)/ Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) European type water closet suit with non-concealed: P: trap with or without vent and all other necessary fittings as fully described in item no.30.3 above. (i) White

HSR 30.12 (i)/ Extra over item nos. 30.1 to 30.4 and 30.6 for providing and fixing 15 liters capacity low level vitreous china ware cistern complete with flush bend all other necessary fittings instead of C.I. high level cistern complete with fittings. (i) White

HSR 30.75 (c)/ Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge). (c) Bib cock

HSR 30.76 (i)/ Providing and fixing in position C.P. brass stop cocks (as approved by the Engineer-in-charge) (a) 15 MM STOP COCK (i) Stop cock male and female end

HSR 30.119/ Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing over flow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge. (Except civil work)

DSR 18.8.1/ Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.1 15mm nominal outer dia. Pipes

DSR 18.8.2/ 20mm nominal outer dia. Pipes

App. Item/ Providing & fixing of Tube Light Set fitted in Box Complete in all respect. Make: Philips, Bajaj, Syska

M/s PSS