REPAIR MAINT OF BRICK WORK, STONE MASONARY WORK, PCC DRAIN, PATCH TILE WORK ETC. AT WSA AREA UNDER 1 WG, AF STN SRINAGAR.

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified.

M&L for 75 mm PCC 1:4:8 type D-2 (40mm graded agg) as in sub base, all as specified.

M&L for sand cushioning over PCC surfaces, for laying of interlocking tiles, & similar work, spread rolled and consolidated to gradient as required.

Demolition of interlocking paver block of any description or thickness in path / hardstanding etc laid, bedded and pointed dry, all as specified.

M&L for coloured glossy finish machine pressed rubber moulded precast concrete interlocking paver blocks any shape and size of any pattern conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigments, complete all as specified.

All as per item no 05 above but except interlocking tiles / paver block complete all as specified..

M&L for cement concrete Type B1,1:2:4 (20mm graded aggregates) in roof kerbs of mud stops, rounded or chamfered on edges in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing.

Demolition of brick work or stone / boulder masonry, built in cement mortar in any position and of any description including PCC copings and removing away unserviceable material as directed and specified.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, all as specified and directed.

Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as spfd (except bricks)

M&L for walling of random, rubble, uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified.

All as per Item no 11 above but except stone.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in benching, coping etc and the like including necessary form work if any complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in bed of drain complete all as specified and directed.

Demolition of cement concrete (unreinforced), in ground floors and pavings exc 15 cm thickness (below or above ground level), complete all as specified.

M&L for 100 mm thick dry lean concrete 1:4:8, type D2 (using 40mm graded aggregate) as in foundations, sub base, complete all as specified and directed.

M&L for polythene film, black, 400 micron thick laid in floors including lap, all as specified.

M&L for plain cement concrete 1:1.5:3, type A1 (using 20mm graded aggregates) as in floor with finishing surface of concrete as fair & even, all as specified.

Finishing surface of concrete roads,pavments by brooming, complete all as specified and as directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘A’ with thickness of slab 150 mm, complete all as specified & directed.

M&L for Forming contraction (Dummy) joints 50 mm deep x 10 mm wide, filled with sealing compound grade A, all as specified.

M&L for 20 mm thick rendering in cement mortar 1:4 on on stone masonary wall surface, finished even and smooth without using extra cement complete all as specified.

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for 15 mm thick rendering in cement mortar 1:4 on on stone masonary wall surface, finished even and smooth without using extra cement complete all as specified.

M&L for 15 mm thick rendering in cement mortar 1:4 on on brick masonary wall surface, finished even and smooth without using extra cement complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge

M&L for 100 mm thick PCC 1:2:4 type B1, using 40 mm graded stone aggregate as in floor laid in alternate bay finished even and smooth without using extra cement.

M&L for 75 mm thick PCC type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixed in repair galvanised 2 strend steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strails straining bolt including securing or tying at crossing with and provn of galvanised mild steel wire staple or steel pins etc complete all as specified as directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and pointed in any mortar, all as specified.

M&L screed bed or bedding layers of 15 mm thick for laying floors in CM 1:4 complete all as spfd.

M&L for coloured rubber moulded glossy finish Chequerred cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed in neat cement slurry with grey cement and pigment in floors complete all as spfd.

M/S BASHIR AND SONS

M/S A.R.TANTARY

M/S MAQBOOL BHAT & SONS

M/S GHULAM HASSAN AND SONS

M/S ABDUL REHMAN WANI

M/S MIR AND CO

M/S Thakur & Sons

MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS