REPAIR MAINT OF FURNITURE FOR BRC DANAPUR AND MUZAFFARPUR UNDER GE DANAPUR CANTT

Amount

ALMIRAH STEEL LARGE FD-67 (M)/351/1031

Taking out unserviceable broken leg from almirah steel large and supply & fixing new leg made out of plain back iron sheet1mm thick of suitable size and welded including applying two coats of spray paints with olive green synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej/link (Including duplicate keys of stainless steel of size 65mm to Almirah large steel complete all as shown on drawing.

Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as shown on drawing.

Supply and fixing steel almirah cover (for locking system) made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Dismantling carefully and taking out old unserviciable/damaged shelf of almirah large steel and supply & fixed of new shelf made out of MS sheet 1mm thick band to required shape & size and welding the same properly in position including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing.

Dismantling carefully and taking out unserviciable/damaged door single leaf of Almirah large steel and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and applining two coats of spray paints internally and externally with synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing.

ALMIRAH STEEL MEDIUM FD-67 (M)/243/350/1032

Taking out unserviceable broken leg from almirah steel medium and supply & fixing new leg made out of plain back iron sheet1mm thick of suitable size and welded including applining two coats of spray paints with olive green synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing.

Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej/link (Including duplicate keys of stainless steel of size 65mm to almirah steel medium complete all as shown on drawing.

Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as shown on drawing.

Supply and fixing steel almirah cover (for locking system) made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Dismantling carefully and taking out old unserviciable/damaged shelf of almirah steel medium and supply & fixed of new shelf made out of MS sheet 1mm thick band to required shape & size and welding the same properly in position including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Dismantling carefully and taking out unserviciable/damaged door single leaf of almirah steel medium and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and applining two coats of spray paints internally and externally with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

BED PLYWOOD TOP(FD-246,247 )

M&L for taking out old damaged/unserviceable head rest of bed plywood top and supply & fixing new head rest (of suitable size), 3.5 mm thick one side teak faced and other side commercial plywood including preparation of surface & applying high gloss French polish on newly fixed head rest to match the colour with existing surface complete all as per drg and as directed.

All as per item No.3.01 above but broken foot rest complete.

M&L for taking out old damaged/unserviceable long rails of bed plywood top and supply and fixing new long rails made of Ist class hard wood (MP teak) minimum size 1800x100x35 mm and applying high gloss French polish on newly fixed long rails to match the colour with existing surface complete all as per drg and as directed.

M&L for taking out old damaged plywood top and supply and fixing new ply wood of suitable size, 12 mm thick commercial type, grade BWP (minimum size 6’ x 3’) complete all as per drg and as directed.

CHAIR DINING(FD-16, 279,228, 203)

M&L for taking out old broken unserviceable front leg of chair dining and supply & fixing new front leg of suitable size, made of Ist class hard wood (MP teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as per drg and as directed.

All as per item No. 4.01 above but rear leg complete.

All as per item No. 4.01 above but side rails complete.

All as per item No. 4.01 above but rear rails complete.

All as per item No. 4.01 above but front rails complete.

All as per item No. 4.01 above but side stiffeners complete.

All as per item No. 4.01 above but center stiffeners complete.

All as per item No. 4.01 above but back rest complete

CHAIR WRITING(FD-250,280)

M&L for taking out old broken unserviceable front leg of chair writing and supply and fixing new front leg of suitable size ,made of Ist class hard wood (MP teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as per drg and as directed.

All as per item No. 5.01 above but rear leg complete.

All as per item No. 5.01 above but side rails complete.

All as per item No. 5.01 above but rear rails complete.

All as per item No 5.01 above but front rails complete.

All as per item No. 5.01 above but arm complete.

All as per item No. 5.01 above but side stiffeners complete.

All as per item No. 5.01 above but center stiffeners complete

All as per item No. 5.01 above but back rest complete.

CHAIR EASY(FD- 17,201,229)

M&L for taking out old broken unserviceable front/rear leg of chair easy and supply & fixing new front leg of suitable size made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as per drg and as directed.

All as per item No. 6.01 above but front rail complete.

All as per item No.6.01 above but rear rail of seat complete

All as per item No. 6.01 above but top rail of back complete

All as per item No. 6.01 above but bottom rail of back complete.

All as per item No. 6.01 above but arm complete.

CHAIR SCHOOL WITH HAND BOARD

M&L for taking out old broken unserviceable pvc seat of chair school with hand board and supply & fixing new pvc seat of suitable size to match the with existing chair school with hand boardcomplete all as per drg and as directed.

M&L for taking out old broken unserviceable hand board of chair school with hand board and supply & fixing new hand board of suitable size to match the with existing chair school with hand board complete all as per drg and as directed.

M&L for taking out old broken unserviceable iron frame of chair school with hand board and supply & fixing new iron frame of suitable size to match the with existing chair school with hand boardcomplete all as per drg and as directed.

CHAIR TUBULAR STEEL WITH ARM (FD-75M)

Removing of existing old unserviceable seat and supply & fixing new seat made out of teak wood frame duly canned as per Godrej patten and applying two coats of high glossy French Polish and fixed with new screws complete all as shown on drawing.

~ditto~ All as per item No. 8.01 above but old unserviceable back complete.

Removing of existing broken unserviceable arm and supply & fixing new arm of 2nd class hard wood of suitable size and applying two coats of high glossy French Police fixed with new screws complete all as shown on drawing.

S&F MS cleats of size 25 mmx 50mmx3mm thick, welded to frame of seat of chair duly painted with one coat of OG synthetic enamel paint over a coat of red oxide primer complete all as shown on drawing.

CHAIR TUBULAR STEEL WITHOUT ARM (FD-75M)

Removing of existing old unserviceable seat and supply & fixing new seat made out of teak wood frame duly canned, Godrej patten and applying two coats of high glossy French Polish fixed with new screws complete and rest all as per drawing.

All as per item No. 9.01 above but old unserviceable back complete.

S&F MS cleats of size 25 mm 50mmx3 mm thick, welded to frame of seat of chair duly painted with one coat of OG synthetic enamel paint over a coat of red oxide primer complete and as shown on drawing.

CHAIR VERANDAH STEEL (FD-19/256)

Removing of unserviciable/torn nylon newar/ plastic cane/PVC Shoes from existing chair and supply & recanning with new plastic cane 4mm wide 1/2 round of approved quality all as directed irrespective of what is shown on drawing including painting the frame with one coat of white synthetic enamel paint before recanning including S & F PVC shoes to the legs comlete all as directed and rest all as per drawing.

TABLE (3' X 2') WITH DRAWER & WITHOUT DRAWER (FD-1007/1008)

Removing of old/broken table top and supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm x 18 mm size fixed with fevicol and panel pins and duly given a coat of high glossy french polish and applying one coat of OG synthetic enamel paint on the steel frame complete and rest all as per drawing.

Removing of old broken drawer from existing table 3’x2’ and providing new steel drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer as directed and shown on drawing.

Removing the existing unserviceable lock from the drawer of table and supply & fixing new brass lock, with duplicate keys complete.

CHARPOY GI PIPE WITH PLY TOP (FD-220)

Removing of old UNSV existing plytop from Charpoy GI Pipe with plytop complete and S&F 12 mm thick of size 900x1980 mm ply shall be fitted on two numbers MS stiffner of size 870mm x 35mm x 5mm thick with 12 Nos nut and bolts galvanised of appropriate size of washer. New plytop BWR ISI make Century/Green ply marked complete all as specified and shown on drawing.

Taking out old broken existing long rail by unscrewing from GI charpoy without damaging the adjacent parts and S & F new long rail of GI pipe 32mm bore (nominal dia) Medium Grade duly threaded both ends up to the required length and fitted to the frame of GI Charpoy complete all as specified and shown on drawing.

Taking out old broken existing short rail by unscrewing from GI charpoy without damaging the adjacent parts and Fixing short rail made out from long rail (reterived from Item No 12.02 here-in-before) duly cut and threaded both ends up to the required length and fitted to GI charpoy frame complete all as specified and shown on drawing.

Taking out old broken existing leg by unscrewing from GI charpoy without damaging the adjacent parts and Fixing leg made out from long rail & short rail (reterived from Item No 12.02 & 12.03 here-in-before) duly cut and threaded one top end up to the required length and other one provided with 2mm thick MS round Sheet of size be welded inside the bottom end including S & F 02 Nos FI clamps of size 25 x 3 mm to leg and treated with two coats of black paint over a coat of red oxide primer complete all as specified and shown on drawing.

Taking out existing unserviceable/ broken GI check nut from existing charpoy GI pipe and supply and fixing 32mm bore check nut medium grade complete all as specified and shown on drawing.

Taking out existing unserviceable GI elbow from the charpoy GI pipe and supply & fixing new ISI marked 32mm dia, 3 way, GI elbow, medium grade compete all as specified and shown on drawing.

TABLE 3’X2’ WITH/WITHOUT DRAWER(FD-283,284,55,209,231)

Taking out old broken unserviceable leg of table 3’X2’ with/without drawer and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No.13.01 above but broken side rail.

All as per item No.13.01 above but broken front/rear rail.

All as per item No.13.01 above but broken side stiffener.

All as per item No.13.01 above but broken center stiffener.

M&L for taking out old broken/un-serviceable table top of table 3’X2’ with/without drawer and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

TABLE DRESSING LADIES(FD-251,378)

M&L for taking out old broken looking mirror of table dressing ladies and supply & fixing new looking mirror 5 mm thick of suitable size complete all as per drg and directed.(Float glass Make:-Modi Guard/Saint Gobain)

M&L for taking out old broken sliding glass shutter with aluminium channelof table dressing ladies and supply & fixing new sliding glass 4 mm thick with aluminium channel of suitable size all as per drg and as directed.

M&L for taking out old broken/un-serviceable side of dressing ladies and supply & fixing new side of suitable size made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side complete all as per drg and directed.

M&L for taking out old broken/un-serviceable top/bottom of dressing ladies and supply & fixing new top/bottom of suitable size made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side complete all as per drg and directed.

M&L for taking out old broken/un-serviceable Drawer of Table Dressing Ladies and supply Drawer of suitable size made of 12 mm thick commercial ply wood complete.

M&L for taking out old broken/un-serviceable back of Table Dressing Ladies and supply and fixing back of suitable size made of 6 mm thick commercial ply wood complete.

TABLE DRESSING GENTS(FD-31, 230, 278)

M&L for taking out old broken looking mirror of table dressing gents and supply & fixing new looking mirror 5 mm thick of suitable size (Make:-Modi Guard/Saint Gobain) complete all as per drg and as directed.

M&L for taking out old broken/un-serviceable side of looking mirror gents(box) and supply & fixing new side of suitable size made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side complete all as per drg and directed.

All as per item No.15.02 above but broken back of suitable size made of 12 mm thick commercial ply wood complete.

TABLE DINING STEEL 1520 X 860 X 760 mm

Removing of old/broken table top and supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm x 18 mm size fixed with fevicol and panel pins and duly given a coat of high glossy french polish and applying one coat of OG synthetic enamel paint on the steel frame complete and rest all as per drawing.

LOCKER STEEL(FD-257/1029)

Taking out unserviceable broken leg from Locker steel and supply & fixing new leg made out of plain black iron sheet 1mm thick of suitable size including applying a coat of red oxide primer and one coat of synthetic enamel paint after preparation of surface complete and rest all as per drawing.

Dismantling/Taking down old unserviceable hasp and staple without damaging the adjacent parts of locker and supply & fixing new mild steel chromium plated hasp and staple 100mm size complete all as specified and rest all as per drawing.

Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new mild steel chromium plated handles 100 mm long of approved quality complete all as shown on drawing.

Taking out old unserviceable broken hinges of shutters without damaging the adjacent parts of locker and supply & fixing new MS hinges of 75 mm long of approved quality complete and rest all as per drawing.

Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej pattern (Including duplicate keys of stainless steel of size 65mm to Almirah large steel complete all as shown on drawing.

TABLE PEG (FD-25,236,277)

M&L for taking out old broken unserviceable leg of table peg and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as per drg and as directed.

All as per item No. 18.01 above but side rail complete.

All as per item No. 18.01 above but front/rear rail complete.

All as per item No. 18.01 above but side stiffener complete.

M&L for taking out broken/un-serviceable table top of table peg and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board ,bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and directed.

TABLE 3’X3’ WITH/WITHOUT DRAWER

Removing of old/broken table top and supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm x 18 mm size fixed with fevicol and panel pins and duly given a coat of high glossy french polish and applying one coat of OG synthetic enamel paint on the steel frame complete and rest all as per drawing.

Taking out old broken unserviceable leg of table 3’X3’ with/without drawer and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No.19.01 above but broken front/rear/side rail.

TABLE BED SIDE(FD-28,248, 276, 210)

M&L for taking out old broken/un-serviceable side of table bed side and supply & fixing new side of suitable size made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side and bottom shall be covered with 3mmX 18mm size teak wood beading fixed with panel pins complete all as per drg and as directed.

All as per item No. 20.01 above but broken top of suitable size complete.

M&L for taking out old unserviceable/broken center/bottom shelf of table bed side and supply and fixing new center /bottom shelf of suitable size, made out of 12 mm thick pre- laminated particle board bonded with formaldehyde synthetic resin, exterior grade, one side with approved shade & balancing white lamination on other side complete all as per drg and as directed.

M&L for taking out old unserviceable/broken back of table bed side and supply & fixing new back made out of 6 mm thick commercial grade plywood of suitable size complete all as per drg and as directed.

CHARPOY IP FOLDING PLY TOP

(a) Removing on unserviceable Plywood Top from Charpoy IP folding and supplying and fixing new plywood of ISI Grade.

BOOK CASE STEEL WITH GLASS PANEL

M&L for taking out old unserviceable/broken shutter glass and supply & fixing new shutter glass of 3 mm thick of suitable size complete all as per drg and as directed.

M&L for taking out old unserviceable/broken shutter handle and supply & fixing new shutter handle of 75 mm length of suitable size complete all as per drg and as directed.

M&L for taking out old unserviceable/broken shutter lock and supply & fixing new shutter lock of suitable size complete all as per drg and as directed.

SOFA SET 4/5 SEATER(FD- 281& 373)

M&L for taking out old broken/unserviceable arm of sofa set 5 seater and supply & fixing new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete all as per drg and as directed.

All as per item No. 23.01 above but broken front leg complete.

All as per item No. 23.01 above but broken rear leg complete.

All as per item No. 23.01 above but broken rail of single seater complete.

All as per item No. 23.01 above but broken long rail of long pieces 3 seater complete.

M & L for removing old unserviceable foam cushion along with tapestry cloth of existing sofa set and supply & providing new 100 mm thick foam cushion, 32 density, size 520 x 560 mm duly covered with long cloth and leatherised rexin cloth /tapestry cloth not more than @ Rs 350 of approved quality complete all as per drg and as directed by engr in-charge. MAKE : Sleepwell / Kurlon

POLISHING TO WOODEN FURNITURE.

M & L for preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfaces with sand paper, removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surface with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish as per manufacturers instructions till glossy finish is achieved for the following furniture items complete all as directed :-

Bed plywood top (FD-246, 247).

Chair dining (FD-16, 279, 228, 203)

Chair Writing (FD-250, 280)

Chair easy (FD-201, 229).

Table peg (FD-25, 236, 277).

Table 3’x3’ with drawer/without drawer

Table 3’x2’ with drawer/without drawer (FD-283, 284, 55, 209 & 231).

Table dressing ladies (FD-251 & 378).

Table dressing gents (FD-31, 230 & 278).

Table bed side (FD-241).

M&L for preparation of old painted iron & steel surfaces (externally and internally including shelves etc) by scraping & rubbing down with sand paper, removing dents and scratches, if any and filing the same with paste filler and applying a coat of olive green synthetic enamel paint to the following furniture items complete all as per drg:-

Almirah steel. large with shelves (FD-67(M), 351, 1031)

Almirah Steel Medium with shelves (FD-67(M), 243, 350, 1032)

Chair steel tubular with arms (FD-75(M))

Chair tubular steel without arms (FD-75(M))

Locker steel.

Book Case Steel with glass panel

MNF Set Iron

Chair school with hard board (FD-E6/MAP/05)

Table dining 1520x 860x760 steel

Table 3x2 steel with drawer/without drawer (FD-1007, 1008)

Charpoy IP folding

TRIBENI SINGH AND SONS

M/S SAROJ KUMAR SINGH

M/S R.B.COMPANY