SPL REPAIR TO TOILET BLOCK AT BLDG NO EB-101, EB-102, EB-103 AND EB-104 AT DEMO BN AND PROVN OF HIGH MAST LIGHT AT FOL AREA AT 51 (I) SUP PL ASC UNDER GE (AWC) MHOW

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, as in roof convening / cladding to wall, fixed with self tapping screws. Complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, as in roof convening / cladding to wall, fixed with self tapping screws. Complete all as specified and directed.

M&L for MS framed structure roof trusses (framed), trussed, purlins, crane gantries and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed.

Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor) beams, staircase, landing, chajjas and similar suspended work complete Complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate including finishing surface of concrete topping even and rough complete as in levelling work etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed.

M&L for Coloured Non Skid ceramic joint free tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.06 Sq. M but not exceeding 0.18 Sq. M, in floors etc,including 15 mmthick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile complete all as specified and as directed.

S&F Glazed ceramic tiles in vertical surface 450 x 350x 7 mm thick ,including 10 mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or cloured cement to match the shade of tiles complete all as specified and as directed. Note : Rate includes for cutting for offsets etc)

M & L for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate) as in plinth protection finishd even and smooth with out using extra cement complete all as specified and directed.

M&L for 100 mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded stone agg) as in Sub-base to floor finishes complete all as specified and directed.

M&L for morum filling/redbajri filling under floors or in foundations including watering &consoldation laid in layers n.exc 15 cm thick spread levelled and well rammed. Complete all as specified and directed.

Material and labour Providing and laying 60 mm thick factory made chamfered edge cement concrete interlocking paver block as per IS 15658-2006 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

M&L for Pre Cast Cement Concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in Kitchen/flat forms platform and Cover slab for manholes etc set in cement mortor 1:4 including use and waste necessary form work (Reinforced shall be measured and paid seprately) all as specefied

M&L for granite slabs 20mm thick machine cut bedded laid over cement screed 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl grinding moulding rounding chamfering and polishing complete all as psecified as in counter sink wash hand basin etc

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.

M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed.

Taking down cement plaster on wall of any description incl racking out joints for key, scrubbing with water etc. complete all as specified and directed.

M & L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ of 3% by weight of cement (WPC measured and paid separately) complete all as specified and directed.

Supply only integral water proofing compound.

M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified .

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts wells, cesspits, manholes, pier holes etc not exc 10sqm on plan and getting out in soft / loose soil. Complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with all kind of soil. Complete all as specified and directed.

M&L for removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit. Complete all as specified and directed.

Description all as per ser item No. 29.00 above but n exc 1.5 Sqm. Complete all as specified and directed.

S&F pressed steel door frames of size 105 x 60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified as directed.

Providing Factory Made 35 mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 50 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. Complete all as specified and directed.

Providing 30 mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 500 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.

Material and labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification all as directed.

S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be following specification complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos.including satety steel grill (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos.

M&L for 5.5mm thick sheet glass n exc 0.50sqm in area to be fixed in alluminium windows Complete all as specified and directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. Complete all as specified and directed.

S&F 250 mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F 100 mm size of Butt hinges, medium weight cold rolled mild steel etc Complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section with 100 mm long bolt, all as specified .

S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified .

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specifiedand as directed.

S&F Extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified and as directed.

M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified & as directed.

Taking down 15mm bore steel tubing and connections in any position, Complete all as specified and directed.

Taking down 20mm bore steel tubing and connections in any position, Complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting not exc 10 cm grith complete all as specified and directed.

Supplying and fixing of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified

Supplying and fixing of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified

M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed.

S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position including taking down, all as specified in SSR part I- complete.

S&F 20 mm dia brass ball valve, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule fixed in repair complete all as specified and directed.

S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Long body CP Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F angular stop valves, cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed.

S&F chromium plated shower roses 125mm sizes with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

M&L for Health faucet (ABS Bpdy) mild steel chromium plated suitable for 15mm dia pipe 1.25 M long flexible tube and ABS wall Hook including making connection and fixed in position with two way tap complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan , "Orissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) with 110mm dia PVC SWR 'P' or 'S' trap, fixing of cistern, complete including provision of cement concrete all as specified and directed.

S&F in repairs for vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP fancy type pillar tap, 01 Nos 32mm waste coupling , one pair of MS bracket, cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fix vitreous china wash basin, white, ovel shape size 550 x 400mm , 01 No. fancy type chramium plated piller tap, CP stop cock & 450mm long PVC connection, 01 Nos 32mm waste coupling and pipe, , including cutting Granite slab for placing wash basin nosing edges all as specified and directed.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern Complete all as specified and directed.

S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) including waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia all as specified and directed

S&F in repairs PVC connection 15mm dia, 450mm Cms long with brass ferrules on both ends fixed complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Dismantling of cast iron/PVC pipes jointed in cement mortar 110 / 75 mm bore all as specified and directed

S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down existing pipe complete all as specified and directed.

S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed.

S&F in repair PVC (SWR) bends of any radius 110mm bore dia complete all specified and directed.

S&F in repair PVC (SWR) bends with access door any radius 110mm bore dia complete all specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and directed.

S&F PVC(SWR) vent cowl 110mm bore dia complete all specified and directed.

S&F PVC (SWR) bends any radious 75 mm dia complete all specified and directed.

S&F PVC (SWR) bends with access door any radious 75 mm dia complete all specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal of bore 75mm complete all specified and directed.

S & F in repairs PVC (SWR) Floor trap/Nahani trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm complete all specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed.

S&F for PVC waste pipe for urinal/WHB with fitting etc 38 mm dia. 600mm long complete all specified and directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A, etc complete all as specified and directed.

M&L for Pre-cast Cement Concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs for manholes etc., set in cement mortor (1:4) including mouldings complete all as specified and directed. Note: Reinforcement will be measured and paid separately.

M&L for Plain cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) as in coping of manholes, fdn of drains etc ,complete all as specified and directed.

M & L for RCC M-25 using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for RCC M-25 using 20mm graded stone aggregate as in Columns, pillars, piers, posts walls,and struts complete all as specified and directed.

M & L for Form work to sides of foundation / base of columns plinth beams and similar work with fair finished surface complete all as directed.

M & L for Form work to sides of columns walls and similar work with rough finished surface complete all as directed.

M & L for TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Description all as per ser item no. 97.00 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers,distribution and binders. Complete all as specified and directed.

Demolition and breaking up 150/200 mm dia drain pipes ( Salt glazed ware, AC, or Reinforced concrete pipe Etc ) Set in cement mortar. Complete all as specified and directed.

S&F in 150mm dia HDPE DWC pipe laid in tranches Class SN 8 structured wall polyethylene piping system (pipe with online /offline coupler and elastomeric sealing ring) with non- smooth External annular corrugated and smooth internal surfaces (double wall) for non- Pressure under ground sewerage application as confirmed to IS16098 (Part-2):2013 complete all as specified and directed. Note : 1.color- Outer Black/ inner Orange 2. The pipes will be confirming to the IS 16098(Part-2):2013 and shall be marked with BIS.

S&F in 200mm dia HDPE DWC pipe laid in tranches Class SN 8 structured wall polyethylene piping system (pipe with online /offline coupler and elastomeric sealing ring) with non- smooth External annular corrugated and smooth internal surfaces (double wall) for non- Pressure under ground sewerage application as confirmed to IS16098 (Part-2):2013 complete all as specified and directed. Note : 1.color- Outer Black/ inner Orange 2. The pipes will be confirming to the IS 16098(Part-2):2013 and shall be marked with BIS.

Material and labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate for concrete bed to 200mm dia HDPE DWC pipe incl packing under and haunching against the sides of pipe after they are laid and tested. Complete all as specified and directed.

Material and labour for PCC 1:3:6 type C2 using 40 mm graded stonestone aggregate for concrete bed to 150mm dia HDPE DWC pipe incl packing under and haunching against the sides of pipe after they are laid and tested. Complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surfaces and applying two coat Acrylic emulsion disptember with roller over applying minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed (Note:-Contractor shall furnish gaurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machine (Mechanical means)

M&L for new/Old plastered / decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all a specified and as directed.(Note : painting will be done by brush / spray / roller of building upto the height all as per directed by Engr -in-Charge) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site )

M & L for preparation of newly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light, fan, sockets or power) complete including all fittings and fixtures such as switches, sockets, ceiling roses, pendens, regulators, light fittings etc, removing materials to store for taking credit and making good disturbed surfaces complete all as specified and directed.

M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, concealed on walls and fixed by means of brass screws incl modular cover plates and cover frame any size/module and blank plates, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch, complete incl making good of wall surface by cementing/plastering , applying wall putty incl 02 coat of distempering to match with the existing colour all as specified and directed.

Description all as per ser item No. 108.00 above but for one 3 pin, 5/6 Amps socket outlet point on same board controlled by one, 1 way 5/6 Amps switch Complete all as specified and directed.

Description all as per ser item No. 108.00 above but for one 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, 1 way 5/6 Amps switch. Complete all as specified and directed.

M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, fixed concealed in walls by means of brass screws incl modular cover plates and cover frame any size/module, for housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for 15 / 16 Amps socket outlet on independent board, complete incl making good of wall surface by cementing/plastering , applying wall putty incl 02 coat of distempering to match with the existing colour all as specified and directed.

S&F in replace Ceiling rose 3 terminal AC 230 V, 50 Hz ISI Marked all as specified and directed.

S&F in replace modular switch 1 way 6A, 1 module, ISI Marked complete all as specified and directed.

S&F in replace modular switch 1 way 16A, 1 module, ISI Marked complete all as specified and directed.

S&F modular socket outlet, 6A - 2/3 pin combined 2 module, ISI Marked complete all as specified and directed.

S&F modular socket multipurpose 6/16A, 2 module, ISI Marked complete all as specified and directed.

S&F in replacing decorative ultra slim poly carbonate LED tube light fitting 4 feet long 22 watts with THD less than 15% very high efficiency suited for T-8 tube light luminaire with system efficiency 110 lumens per watts. High quality polycarbonate end cap in white finish and snap fitted to the housing complete all as specified and directed.

S&F in replace LED bldg. security light fitting 30 watts made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP-65 and IK-07 protection, THD < 10% , lumen output ≥ 110 lumen per watt complete all as specified and directed.

S&F in replace GI mounting pipes of building security light fittings of size 32 mm to 40 mm size up to 1.2 mtr length bend into sizes incl mounting clamps, saddles, nut bolt and washers all as specified and directed.

S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, 230 V,50 Hz suitable for fixing MCB SPN as incomer and SP MCB/Isolator as outgoing, including taking down old DB with MCBs, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.

S&F MCB DB, SPN 4 way, IP-43, IK 09, double door type with metal door, 230 V,50 Hz suitable for fixing MCB SPN as incomer and SP MCB/Isolator as outgoing, including taking down old DB with MCBs, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.

S&F MCB SPN 20 to 32 Amps,10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB SP 6 to 32 Amp, 10 kA breaking capacity, 'C' curve complete all as specified and as directed.

M & L sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

M&L in reparis earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of , all as shown in electrical plate No. 3 connected to earthing test point and complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C-1 (using 20 mm grade crushed stone aggregate) earth chamber, RCC 1:1.5:3, type A-1 cover slab, 40 mm thick reinforced with 6 mm dia TMT bar @ 150 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

Supply and laying and testing Cable XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 volts grade with stranded aluminium conductor of 6 sqmm 4 core all as specified and as directed.

M&L fine sand cushioning for cable protection in layers incl punning all as specified and directed. Note : Punned down thickness shall only be measured.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm all as specified and as directed.

S & F tubes, 'light grade,galvanised, with all fitting of size 40 mm laid in trenches for cable protection all as specified and directed.

S&F in replacing wall mounted 10 watts LED batten 2 feet long comprising extruded aluminium heat shrink provided for efficient heat dissipation & integrated electronic driver with aluminium housing system efficiency of 110 lumen per watt and lumen package ≥1100 lumen, THD < 10% complete all as specified and directed.

S&F air freshener fan 250 mm sweep, 900 RPM, PVC body AC single phase 230 volt, ISI marked with inbuilt louver complete all as specified and directed.

Supply and fix electric water heater sorage type Aluminium/ steel body wih copper/stainless seel inner tank and heaing element upto 2 kW capacity 25 lttrs BEE 5 star rated complete with all necessary accessories such as safety valve, themoostat, NRV, connection pipe etc. including taking down of old geyser and deposit to mes store yard

Supply, install, testing and commissioning of 16 Mtr motorised High mast shaft in two sections, internally and externally hot dip galvanised with average 70 microns, designed for 50M/Sec wind speed, comprising of raising and lowering system, 6mm dia stainless steel wire ropes 3 no for Lantern carriage and 2 no for winch, head frame, double drum winch with luminaire mounting arm, lantern carriage suitable to install 9 to 12 Nos luminaires in symmetrical arrangement, trailing cable 1100 volts grade ISI marked multistranded copper conductor cable 6 core 2.5 sq mm, connector, integral power tool suitable for handling the total head load, , pully assembly, LED aviation obstruction light, lightning arrester spike including necessary foundation with RCC M-25 grade concrete for high mast considering the safe soil bearing capacity at site as 10T/sqm at 2 metre depth as per manufacture's design complete all as specified and as directed.

Supply & fixing of LED floodlight type 200 Watt with 120 lumen per watt.Supply & Fixing of Led Flood Light fitting 200 Watt having efficacy >120 lm/w system output of minimum 48000 lumens,THD< 10% PF>.95 CRI >70 CCT 5700-6400k With IP 66 protection single piece die cast aluminium housing having pc with IK 08 luminarires s. Led driver should be potted and Encapsuled.Surge protection should 4kv and 10 kv external SPD housed in luminaries. LM 79 and LM 80 report submitted at the time of product approval And only well reputed LED chip make install in fixture Cree/Osram/Brdgelox/Nexon etc complete all as specified

Supply Installation & Commissioning of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals, mounted on suitable foundation complete all as specified and as directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core in trenches / under PCC/interlocking tiles incl making good of surface with PCC/ cementing incl connecting to existing LT panel board and VTPN DBs all as directed at site complete all as specified and dircted.

M&L for trenchless boring or cutting of road, pavement, hard standing without damaging outer surface including making good disturbed surface as existing with cement mortar complete all as specified and directed.

Material and labour for earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below normal ground level connected to galvanised strip 32 x 6 mm by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No. 03 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 use 20 mm graded stone aggregate chamber including necessary formwork / mould for fair and even surfaces, precast RCC 1:2:4 type B0 use 12.5 mm graded stone aggregate chamber cover slab, GI funnel, with GI watering pipe 20 mm bore medium graded, wire mesh, protection pipe 40 mm bore GI pipe light grade for earth lead upto 7.50 metre long salt, charcoal including testing complete all as specified and directed by Engineer-in-Charge. Note : (i) GI strip beyond 7.5 metre will be measured and paid sepeartely. (ii) Test report shall be prepared and submitted by the contractor in triplicate duly obtaining signatures of MES JE / AGE & user. (iii) The earth resistance should be less than 5 Ohm.

sunway associates (BID ID -3511949)

Jamna Constructions (BID ID -3509967)