Karnataka

Active

Works

Electrical

Electrification works to proposed class room secondary school at Doddalahalli, Kanakapura Taluk, Bengaluru South Dist.

Public Works Department

PWD Electrical Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 23 Jun 2026Due tomorrow

Tender Value

Refer Docs

EMD Value

₹19,000

Closing Date

23 Jun 2026, 9:30 pmDue tomorrow

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Public Works Department

Work Description

Electrification works to proposed class room secondary school at Doddalahalli, Kanakapura Taluk, Bengaluru South Dist.

Tender Information

Tender ID

304597

Reference Number

PWD/2025-26/EL/WORK_INDENT33572

Tender Type

Open

Product Category

Electrical

Location

PWD Electrical Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredClass 3 and Above Electrical Inspectorate Registration Certificates

RequiredBalance Sheet & Profit and Loss Statement certified by a Registered Charted Account

RequiredWork done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent.

RequiredTender capacity statement

RequiredOngoing and existing commitments details

Eligibility Criteria

Tenders from Joint ventures are not acceptable

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

The intending contractors are requested to note that, they should abide by the detailed instructions and conditions contained in the KW-1 tender document and further documents there on.

It is the responsibility of the licensed electrical contractor who executes the works to get services of the installations from the concerned Service Electricity Companies duly obtaining approval from the govt. electrical inspectorate as the case may be. However the department will pay the deposit/statutory fees if any after hearing the respective statutory bodies.

The responsibility of safe custody of electrical equipments/ materials, etc., shall be with the contractor until they are finally handed over to the Department.

The Tender shall bear all costs associated with the preparation and submission of his Tender, and the employer will in no case be responsible and liable for those costs.

Tenderer has to handover all the completed work to the respective authority and furnish the acknowledgement for the same before submission of final bill.

During the execution of, any Minor Civil works or any other works are to be executed it has to be done by the Reputed firms/Tenderer, from his end without any charges. Also he should work in coordination with the civil works.

The Tenderer shall not damage the existing building, while execution of electrical works.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates shall be produced at the time of opening of technical Bids for physical verification.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor shall produce the purchase bills.

The Tenderer should furnish details of Works on Hand (Present Contract Commitment) must be enclosed separately.

The Employer reserves the right to reject any or all Tenders without assigning any reason.

The Department is not responsible for any delay in accessing e-procurement portal.

Clause 25.5 stipulates for tenderer to produce detailed rate analysis for various items if tender is seriously unbalanced. (i.e. where quoted rates are very high as well as where the quoted rates are less than estimated rated)

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection.

The Tenderer must submit ongoing and existing commitments details separately.

The tenderer should furnish Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers detail

As per Karnataka State Government order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and G.No. PW/134/BMS/2007 Dt 27.7.2007, a sum amounting to 1% of the bill amount will be deducted welfare fund.

Conditional Tenders will not be accepted.

As per the Govt. Order No PW2BMS2019 Bangalore Dated 19-06-2019 the applicable GST shall be paid to the SR Items separately.

Technical Criteria

Past Experience

3.2To qualify for award of this contract, each tenderer in its name should have in the last Five years i.e. 2021-22 to 2025-26.b) Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work i.e., Providing Electrification Works of value not less than Rs 3.73 Lakhs in a single work.

Others -- Work done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under/ Assessed available tender capacity - (AxNx2.5-B) Where, A-Maximum value of construction works executed in any one year during the last five years (updated 2026-27 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. 0.25 Years (03 Months) B-Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next. 0.25 Years (03 Months) (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Tender capacity statement

Capabilities of Vendor

The tenderer as a Prime Contractor having valid Class-3 & above Electrical License issued by Electrical Inspectorate Govt. of Karnataka and should have suitable technical, financial & managerial capabilities.

Others -- Electrical License

The Tenderer must submit ongoing and existing commitments details separately.

Others -- ongoing and existing commitments Works List.

Financial Status

The Bidders shall deposit E.M.D of Rs. 19000/- through any e-payment mode.

Others -- EMD

3.2To qualify for award of this contract, each Tenderer in its name should have during last five years i.e., from 2021-22 to 2025-26.a) The tenders must have achieved in at least two financial years an average annual financial turnover of an amount Not less than Rs.7.46 Lakhs during last five years. With UDIN Number certified by Chartered Accountant, If Failed to Satisfy the condition tender will be rejected Note: The returns submitted to the I.T. along with the Profit and Loss account statement, Balance sheet should be uploaded for the financial turnover criteria.

Others -- Audited CA Certificate of Annual Turnover

Others

Nil

Others -- Nil

Nil

Others -- Nil

Nil

Others -- Nil

Nil

Others -- Nil

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹19,000

Important Dates

Last Activity

8 Jun 2026

Published

8 Jun 2026

Bid Opening

24 Jun 2026

Download Ends

15 Jun 2026

BOQ Preview

•

Electrification works to proposed class room secondary school at Doddalahalli, Kanakapura Taluk, Bengaluru South Dist.

•

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

•

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm ---- Items of...

•

Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all...

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all le...

•

Supplying And Fixing Metal Fan Box with Round Hook. ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unlo...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

•

Supplying of .feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI LED light fitting 1 x 4' - 36/40 W ---- Items of ...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying & fixing of retrofit type - LED bulb .W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI12W, 6500K ---- Items of work are including cost and conveyance of all ...

•

Supplying & Fixing of 250-400 W lamp Holder ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading an...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall us...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Items of work are including co...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit. The pit should...

•

Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-...

•

Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soila)Cable trench excavation ---- Items of work are including cost and conveyance of all materials, labour char...

•

c) Refilling and consolidation ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of mach...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff2.5 to 25 Sqmm ---- Items of work are including cost and conveyan...

•

Making and fixing of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable as per BESCOM specification ---- Items of work are including cost and conveyance of all materials, labour charges f...

•

Supplying of Aluminium End Terminal (Lug) as per BESCOM specification 16sqm ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead an...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Supplying of Guy Wire & GI Wire as per BESCOM Specification.10 SWG GI Wire(3.251 mm Dia), Std Wt: 82 Kg/KM ---- Items of work are including cost and conveyance of all materials, labour charges for all...

•

CCTVSupplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cem...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32ADP Switch ---- Items of work are including cost and conveyance of all mat...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket ---- Items of work are including cost and conveyance ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 ---- Items of work are including cost and conveyance o...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying and drawing UTP-CAT 6E LAN cable. ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading an...

•

Supplying & fixing of I/O socket with back box Single I/O ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading an...

•

Supplying and and fixing Double I/O of I/O socket with back box ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, load...

•

Supplying & Fixing of . ms Cat 6 Patch Cable 1m ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloadin...

•

Supplying and fixing of 2m cat patch cable ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and...

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager. 9U with 450mm depth. ---- Items of work are including cost and conveyance of all materials, labour charges for all items ...

•

Supplying fixing of Network Switches 24 Port Gigabyte (manageable) ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, l...

•

Supplying & Fixing of Power strip ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of m...

•

Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wir...

•

Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 120 AH capacity ---- Items of work are including cost...

•

Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries. ---- Items of work are including cost and...

•

Supplying, installing, wiring and commissioning of Network Video Recorder (NVR) with the following features: NVR should support IP fixed/PTZ Camera, Alluminium Housing construction, Number of Video In...

•

Supplying, installing, wiring and commissioning of IP 2 Megapixel IP BULLET CAMERA housed in alluminium body, 1inch size CCD Image Sensor, 1inch, D1 (704 x 480 Pixel), HD (1280 x 720 Pixel), Full HD (...

•

Supplying, installing, wiring and commissioning of HARD DISC Type of Drive-SAS. Capacity of Drive-1TB, Rotational Speed (7200rpm) Interface Type Synchronous Transfer Rate (Maximum- 1011mbps) Warranty-...

•

Supplying, installing, testing and commissioning of 32" ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and ...

•

Supplying connecting HDMI CABLE as per TEC Specification G/WIR06/02 (3mtr) complete. ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with al...

•

Supplying fixing of Power on Ethernet (PoE) un Managed Switch, 1No. of 1 G SFP Port (Uplink), Multi-Gigabit Support with Redundant Power supply, 1.8Gbps switching capacity-non blocking, 1.34 Throughpu...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.one way switch. ---- Items of work are including cost and conveyance of all m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A two way switch. ---- Items of work are including cost and conveyance of a...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A three way socket ---- Items of work are including cost and conveyance of ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped fan Regulator two way ---- Items of work are including cost and conv...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP switch ---- Items of work are including cost and conveyance of all ma...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A universal socket. ---- Items of work are including cost and conveyance...

•

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box. ---- Items of work are including cost and co...

•

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. ---- Items of work are incl...

•

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63A ---- Items of work are including cost and conveyance of all materials, l...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- Items of work are including cost and conveyance of all materia...

•

Supplying of Guy wire GI wire. 8 SWG GI wire (4.064mmdia) Std wt.131kg/Km ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP kw-1 bid 33572.doc

Tender Document • 1.06 MB

Ready to Participate?

Download all tender documents and submit your bid