SPECIAL REPAIR TO SCHOOL BUILDING, HARDSTANDING, PATHS AND MISC WORKS UNDER AGE B/R-1 OF GE (EAST) JALANDHAR CANTT

Amount

Demolition of cement concrete in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and directed.

Demolition of reinforcement cement concrete in roofs, floors (other than ground floors), beams, stair cases, landing, chajjas and similar suspended work (reinforcement cut as required to facilate demolition) complete all as specified and directed

Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces complete all as specified and directed.

Material and labour brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per Ser item No 4.00 here-in-before but except bricks

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed complete all as specified.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed

Material and labour 80mm thick coloured reflective type machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-40 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over and including 40mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed.

Material and labour for Providing precast cement concrete type B1(1:2:4) using 20mm graded stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed

Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete and sub base to interlocking tiles etc complete all as specified & directed.

Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed.

Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular in rough finished surfaces of concrete complete all as specified

Use and waste of formwork to chajjas and similar work for flat & rough finished surfaces of concrete complete all as specified and directed.

Material and labour for reinforced cement concrete nominal mix in (1:2:4) type A-1 (using 12.5mm graded aggregate) in chajja, parapet wall and lintel etc complete all as specified and directed.

Material and labour for reinforced cement concrete nominal mix in (1:1½:3) type A-1 (using 20mm graded crushed aggregate) as in base of columns, footings etc complete all as specified and directed.

Material and labour for reinforced cement concrete nominal mix in (1:1½:3) type A-1 (using 20mm graded crushed aggregate) as in columns, pillars etc complete all as specified and directed.

Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:6) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour 15mm thick rendering in cement mortar (1:6) on internal fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick cement mortar (1:4) on external fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling loose/ disintegrated portion of RCC chajjas, bends, shelves, beam balconies and similar work at any position or any height and doubing out with PCC (1:1½:3), 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surface and provision of necessary supports from work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed

Material and labour preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified and directed

Material and labour for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying two coat of oil emulsion distemper (white/tinted) including filling of crack/holes and uneven surfaces etc with wall care putty to achieve smooth finishes complete all as specified and directed

Material and labour preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of old surfaces of ceiling including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.

Material and labour preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint complete all as specified and directed.

Material and labour complete removal of existing treatment by washing, rubbing down and stopping etc on wall surfaces and applying two coats of cement base paint complete all as specified.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Material and labour preparation of old treated wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Material and labour preparation of new or previously untreated concrete surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for reinforced concrete pipes 300mm bore, class NP2, laid and jointed complete with collars and in cement mortar (1:1) and testing including concrete bed to drain pipes surround and encasing to pipes in cement concrete 1:3:6 type C-2 complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning for re-fixing or removal to store complete all as specified.

Supply and fixing 75mm bore PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified.

All as per Ser item No 42.00 here-in-before but 110mm bore

Material and labour hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames glazed with putty or fixed with beads complete all as specified and directed.

Material and labour 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

Material and labour 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.

Material and labour for securing glass of any description in existing wooden/ steel frames glazed with putty/ bends including removing loose or decayed putty/ beads, painting/ oiling one coat on rebates, grooves, reputing and painting/ oiling to match existing work (new length of frames reputed shall be measured) complete all as specified

Material and labour for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the same complete all as specified and directed.

Material and labour for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over roof, digging out roots and making good the disturbed portion of roof tiles n. exc. 1 sqm with tiles including matching the same complete all as specified and directed.

Material and labour precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab in CM 1:4 complete all as specified and directed.

SANDEEP JHANJI CONSTRUCTIONS

M/s GURFATEH BUILDERS

Barmotra Infrastructures

KAMAL AGGARWAL

NIRMAL SINGH

M/s Sahib and Company

G S TRADERS

Motorway Constructions