PROVISION OF SECURITY ARRANGEMENTS IE SECURITY GUARD ROOM ADJACENT TO MAIN GATE INSTALLATION OF MANUAL AND AUTOMATIC BARRIER WITH SPEED BREAKERS CONSTRUCTION OF FLAG MAST AT ROOM TOP AND GROUND FLOOR EXTENSION OF 02 NOS STORE ROOM IN GROUND FLOOR AND

Amount

Surface excavation in soft / loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L Hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete type D2 1:4:8 using 40 mm graded stone aggregate in foundations, filling and mass concrete etc all as specified and directed.

M&L for 75 mm thick PCC type B2 1:2:4 20 mm graded aggregate as in sub floor finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for brickwork with fly ash brick in CM 1:6 straight or curved in plan exc 6m mean radius complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5 mm thick on fair faces of ceiling surface in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

Material and labour preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Material & Labour for new surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and labour 40mm thick cement concrete of type B-0, 1:2:4 (12.50 mm graded stone aggregate) with water proofing compound @ 3% by weight of cement surface finished even and smooth without using extra cement complete all as specified and directed. (Note :water proofing compound shall be measured and paid separately)

Material and labour providing 10mm thick cement plaster in CM 1:4 with water proofing compound @ 3% by weight of cement complete all as specified and directed. (Note :water proofing compound cost will be measured paid separately)

M & L for water proofing treatment including the entrire surface of the roof slab shall be cleaned thoroughly to remove all loose particles and applying 10 mm thick cement mortar 1:4 plastering using WPC @3% per cement laid over hot blown grade industrial bitumen 85/ 25 @1.20 Kg/ sqm over bitumen primer @0.50 litre/ Sqm. Over hot blown grade bitumen 85/25, APP based polymeric membrane minimum weighing 3 Kg / Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms / sqm) laid on primed surface by forced application shall be laid over entire roof surface and vertical surface utpo grooves as applicable (or as per manufacturers recommendation) with overlap of 100 mm . The overlaps shall be sealed by flames or as per manufactuerers instrucitons. A coat of hot blown bitumen 85/25 grade @ 1.20 Kg/ Sqm shall be applied over APP based polymeric membrane complete all as specified and directed. Note : Rendering 10mm thick in cement mortar 1:4 and water proofing compound shall measured and paid separately.

Supply only integral Water Proofing compound complete all as specified and directed.

M&L for Plain cement concrete in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed. Note Reinforcemnet will be measured and paid separately )

M & L for damp proof course 40mm thick in Cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and directed

M & L for nominal mix of Type B1(1:2:4) using 20 mm graded stone aggregate, for foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Use and waste of Formwork to sides of fair finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for nominal mix of Type B1(1:2:4) using 20 mm graded stone aggregates as in columns,posts,piers,struts complete all as specified and directed.

Use and waste of Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed.

M&L nominal mix of Type B1(1:2:4) using 20 mm graded stone aggregates as in beams,cantilevers,bressumers,cantilevers upto 1.5 m span complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for nominal mix of Type B1(1:2:4) using 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use & waste of Form work to soffits of suspended slabs, floor slabs and similar work; not exceeding 200 mm thick(Horizontal or sloping) with with rough finished & flat surface of concrete complete all as specified and directed.

M&L for for nominal mix of Type B1(1:2:4) using 20 mm graded stone aggregates as in Chajjas complete all as specified.etc fair finished complete all as specified and directed.

Use & waste of Form work to chullah hoods, chajjas troughs and similar items including edges, with fair finished flat surface complete all as specified and directed.

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel bars 6mm to 8mm dia in stirrups and main bar, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F stainless steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of stainless steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or stainless steel hanging door fittings and hanging also fastening and fixing including welding, grinding, buffing, polishing complete, stainless steel grade 304 complete all as specified and directed.

Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

All as per item No. 37 above but on vertical surfaces such as skirting, dados etc over and including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces.

M&L for marble stone slab 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and floors and Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade complete all as specified and directed.

S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty/beads in square exc 0.5 sq. m in eachpane fixed to aluminum framing complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed. (Note- Glass shall be measured and paid separately)

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. (Thickness or powder coating not less than 50 micron). complete all as specified and directed.(Note- Glass shall be measured and paid separately)

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F 75mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

Supply and fixing 100mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and fixing vertical roller blind of any colour complete with all its accessories fixed to wall with screws and roller blind as approved by Engr-in-Charge complete all as specified and directed..

S&F Mild steel, plain, black sheet 1.60 mm thick in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E- 250) quality A complete all as specified and directed.

M&L for preparation of new steel surfaces of any description exe 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed.

Material and labour for 16 mm thick mineral fiber or polycarbonate ceiling of size 600 x 600mm board Acoustic CAC-35, fire resist (class -A (UL), light reflectance-0.90, standard humidity resistance-99% and fine texture factory applied latex paint, including frame work for ceiling of GI frame work main tee of size 24 x 32 mm., having 0.27 mm gauge at every 1200 mm. centre to centre maximum and rotary stitched cross tee of size 24 x 27 mm, having 0.27 mm gauge at every 600 mm. c/c. and sub cross tee of size 24 x 27 mm, having 0.25 mm gauge at 1200 mm c/c. and wall angle of size 19 x 19 mm, having 0.35 mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200mm c/c. in both directions using 2.0 mm. thick pre straightened GI wire laying fine fissured butt edge complete all as specified and directed.

Material & labour for preparation of old decorated surfaces of wall by washing, rubbing down, stopping including brooming down smoke soot, moulds, moss and efflorescent salts and trading oil greasy spots completely and applying two coat of plastic emulsion paint over acrylic primer over two coat of white cement putty to obtain smooth finish complete all as specified and directed

Material & labour for preparation of old decorated ceiling surfaces by brooming down,steel wire brushing, scraping down moulds,efflorescent salts and trading oil greasy spots and applying one coat of white wash on ceiling surfaces complete including filling putty/filler where ever drepression found in ceiling complete all as specified and directed.

S&F ‘Optra Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A as per ASTM E-84, fabric with an option of colors – Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut & Shell as per the choice of the Architect of size 600X1200 mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel impalers supplied by manufacturers and construction adhesives as per the instructions laid down by the manufacturer. INSTALLATION: 4Nos. wall panel Impalers of shall be fixed to the wall surface using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Optra wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained.Installation to be carried out by manufacturers team & Installation should be carried out as per manufacturers recommended procedure complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in CM or Cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing the unserviceable one complete all as specified and directed.

M&l Rending 10mm thick in CM 1:6 on brick surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall applying two coat of oil bound distemper over acrylic primer over two coat of white cement putty of approvd make complete all as specified and directed.

S&F modular rubber speed breaker/rumble strip having dimension 500mm x 400mm x 75mm compact high resistance to moiture, capacity to withstand severe impact and colour yellow black model No.GSB-75, acrelic reflective fixed on front and bace help in identifying the location of the speed breaker from a large distance fixed suitable size as per manufacturer instruction complete all as specified and directed.

Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and directed.

(a) One light point controlled by one way switch.

(b) One 3 pin socket outlet, 5/6 amps, on independent board.

All as per item No 59 here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

Supply and fix ceiling rose, surface bakelite,65 x 50mm, three terminals complete all as specified and directed.

S&F Modular White Cover Plate with Frame including metal flush box, 3 Module complete all as specified and directed.

S&F Modular White Cover Plate with Frame including metal flush box, 4 Module complete all as specified and directed.

S&F Modular White Cover Plate with Frame including metal flush box, 6 Module complete all as specified and directed.

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 6 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 6 sqmm size as earth wire drawn in same conduit complete all as specified and directed . Note – 2 Nos of single core cable along with earth wire and PVC conduit shall be measured as one length.

Supply & fix of 600x600mm Recessed Square, Full Glow fitting Maximum 35w, Minimum 4200 Lumen, Efficacy >=120 Lumen/watt., Product can be recessed into 2ft/2ft grid Flase celling, CRCA Hosuing with White Powder Coating and high transitivity Polystyrene (PS) diffuser., CCT 5700k, CRI >80, LED Life L70B50 @ 50K Hrs.@ 45 Degree Ambient, IP: 20, Driver Efficiancy 85%, THD<=10%, Surge Protection 4 KV, Ripple Factor < 5%, Operating Voltage Range 140 to 270v, OEM warranty Certicicate, BIS certificate, LM 79, LM 80 report, Type test Certificate Product and Driver should Submit. Philips Cat Ref: RC380B LED42S-5700 G6 L60W60 PSU OD or equivalent in Crompton/Wipro/Bajaj/Havells

Supply and fix ceiling fans Minimum 3 Star Rating complete with three blade, down rod, accessories 230V, 1200 mm sweep, with Squirrel cage induction motor complete all as specified and directed .

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F flush mounting factory made Ekinoxe SPN DBs Double door IP-43 protection, IK-09 with Metal door with neutral bar,Earth Bar and cables ties for cable menagement fully insulated bus bar 8 way, complete all as specified and directed.

S&F flush mounting factory made Ekinoxe SPN DBs Double door IP-43 protection, IK-09 with Metal door with neutral bar,Earth Bar and cables ties for cable menagement fully insulated bus bar 4 way, complete all as specified and directed.

Supply and fix MCB single pole and neutral, 240 volts, 32 to 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed.

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm as earthing lead by means of check nuts and washer of galvanized iron or steel including 40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

Supply and install hi wall split units indoor/outdoor Copper winded complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2.0 TR complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.Make: V Guard/Microtech/Blue Star

Supply & fix copper tubing pair of two pipe for suction & discharge size of suction pipe 1/2'' & disvcharge pipe 1/4 " diameter 0.8 mm thick complete with separate nitrile vinyl insulation 9 mm thick etc, all as specified and directed including chase cutting wall & making good of existing surface as required on site complete all as specified and directed.

Supply & fix wall / floor mounting type mild steel powder coated stand heavy duty for out door unit as per manufacturer's recommendation complete all as specified and directed.

M&L for unplasticised PVC pipes of fixed complete to walls, ceilings or in floors etc, size 25 mm dia pipe including chase cutting on wall & making good as per existing complete all as specified and directed.

Supply and fix MCB single pole and neutral enclosure with a two pin and earth plug and socket Modular type complete with and including one MCB single pole 20 amps, 240 volts C series complete all as specified and directed.

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 4 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 4 sqmm size as earth wire drawn in same conduit complete all as specified and directed. Note – 2 Nos of single core cable along with earth wire and PVC conduit shall be measured as one length.

Supply Installation Testing and comissioning of Barrier Gate Model SP BB 200 8 Mtr 6s (Electro Mechanical both motorized and manual with 8 Mtr boom (100x4mm) open time 6 sec/Right installed 2 Nos Remote/4000 time per day steel housing box support stand , Controll PCB & Access) complete all as specified and directed. Brand (Make Zkteco/Smartpower/Godrej)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out in soft soil for laying of cables, foundation of poles, and stay assembly complete all as specified and directed.

Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete all as specified and directed.

S&L well burnt sub class ‘B’ bricks (using old size brick) laid in trenches above sand cushioning for cable protection complete all as specified and directed.

Returning, filling in (Soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removal of excavated soil to a distance not exceeding 50 Mtr depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L for Cutting chases,pinning in,making good of PCC hard standing to facing where required and pointing in cement mortar 1:3 , exc.10 cm. but not exc.20 cm girth to ends or edges of landing,steps,cills,sunshades,shelves,lintels,etc.and cutting chases for concealed water tubing or concealed conduit wiring,laying of cables and making good with old shape and size complete all as specified and directed.

M&L for Cutting Bituminous road in,making good with facing where required and pointing exc.30 cm. but not exc.1.0 mtr. girth to ends or edges of landing, steps, cills, sun shades,shelves,lintels,etc.and cutting chases for concealed water tubing or concealed conduit wiring,laying of cables and making good with old shape and size complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in foundation bed complete all as specified and directed.

M&L for cement concrete in foundations, filling and mass concrete type D2 1:4:8 using 40 mm graded stone aggregate complete all as specified and directed

M&L for Rendering 15 mm thick in cement mortar (1:4) on fare faces of brick work or concrete surfaces complete all as specified and directed.

Supply and laying of GI tubing Medium grade 50 mm with all fittings laid in trenches/road crossing/along the pole for protection of cable complete all as specified and directed. (Make:- Jindal/Prakash/Tata)

boon construction company (BID ID -3119371)