Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.1 LAccepted-AOC 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹52.4 L+₹8.2 L (18.5%)Rejected-AOC VILLAGE TAPARIYAN BABINA CANTT BABINA JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹58.3 L+₹14.0 L (31.7%)Rejected-AOC VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹69.9 L+₹25.7 L (58.0%)Rejected-AOC NEAR PUMP HOUSE ROAD NEAR RED ROSE SCHOOL BABINA CANTT JHANSI DISTT UP 284401 | JHANSI | UTTAR PRADESH | 284001 | L4 | Rejected-AOC Rejected |
Tender Value
₹80.0 L
EMD Value
₹1.4 L
Closing Date
20 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JHANSI
HQ CWE JHANSI
REPAIR TO CERTAIN PREMIX ROAD, HEAVY DUTY ROADS IN ZONE-1 TO 12 AND RANGE AREA UNDER AGE B/R-I AT BABINA CANTT
2022_MES_569818_1
CWE/JHA/BAB/TOKEN/69 OF 2022-23
Open Tender
Civil Works - Roads
Item Rate
60 days
BABINA
As per tender documents
9 documents required · 9 mandatory
₹1,000
GE BABINA
₹1.4 L
Yes
16 Feb 2023
17 Dec 2022
26 Jan 2023
17 Dec 2022
20 Jan 2023
7 Jan 2023
Amount
M&L, Scarifying or picking graveled macadam or bituminous macadam surface in area n.exc 400 Sqm and depth n.exc 75 mm deep and removing n.exc 50 mtr and stacking complete all as specified and directed.
M&L, 7.5 cm thick (compacted thickness) WBM with coarse aggregate of granite trap or basalt grading 2 (63 to 40mm) or of grading 3 (50 to 20mm) spread, rolled and consolidated to gradient material and camber required with 8 to 12 tonne power roller complete all as specified and directed.
All as per Ser item No 2 but except material. (Material obtained from Sl No 01 shall be used)
M&L, preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally faning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.
M&L, applying evenly a tack coat of bitumnous primer at 10 Kg per 10 Sqm with using paving bitumen VG-10 and M&L for providing bituminious premix asphaltic semi dense concrete (40mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of mechanical pavers over primed WBM surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.
Repairs to pot holes any depth exceeding 30mm depth, area not exc 1sqm each including sweeping free from dust & mud or water scoring sunken surfaces in roads paths etc, cutting around edges to at least 25mm in depth making good by applying tack coat with paving bitumen @ 5kg/10 sqm putting in pre mixed bituminous macadam, well rammed and sealed with binder 9.8 kg/10 sqm, blinded with 0.09 cum of stone chipping ,6.3 mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot holes exe 30 mm complete all as specified and directed.
M&L, preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally faning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.
M&L for applying evenly a priming / tack coat @ 5 kg per 10 sq m with using paving bitumen VG-10 and M&L for providing bituminious premix asphaltic semi dense concrete (30mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.
M&L for premix bituminous macadam laid / rolled and compacted to required gradient and hcamber and (consolidated thickness 75mm or less) using 4% paving bitumen by weight or total mix complete all as specified and directed.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10cm wide on roads pavements with hot allied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.
S&F in repair for solar delineator size 1000x47mm is made of polycarbonate and toughened aluminium alloy body and height 145mm, dia 80mm comprises of 4 super bright LEDs which give 360 degree viewing incl solar panel 2.5V, 120mm (approx) 1.25V rechargeable battery - 1 No incl surface dressing and PCC 1:2:4 using 12.5mm graded aggregate complete all as specified and directed.
S&F in repair for solar road stud LED based intelligent road studs of size 125x125x25mm ( DA110-DHRUV) made from aluminium alloy and construction. One high capacity NI-Cd rechargeable battery with view distance approximate 1000m, LEDs 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colour back up 12 hours of continuous lighting at night incl fixing with epoxy screed bed all as per manufacturer direction or directed.
S&F in repair convex mirror 1000mm dia made of polycarbonate reflective mirror outdoor use with hood and complet with mounting hardware as per manufacturers instruction for upto a height of 1500mm (above GL) with minimum grade MS pipe 50mm dia and all other complete all as specified and directed.
S&F in repair speed bump, 50mm height and 300mm thick wide made of strudy plastic high resistance precoloured (Black and yellow) bottom of bumps to be filled with cement conc (1:1.5:3) and cured bump studded with reflectors on either side complete all as specified and directed.
S&F in repair sand stone patties in edging of rough squared stones of size 50mm thick, 300mm depth and 60cm long each pattie, length of stone patti shall be laid parallel to the road length, jointed struck flush including necessary excavation, earthwork, returning filling and removal. Note : The cost of taking down existing broken stone patti or brick deemed to be included in unit rate quoted by the tenderer.
Demolition of cement concrete (reinforced ) of any description and in any position etc complete all as specified and as directed.
M&L for TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia completed.
All as per Ser item No 18 above but 5 mm and over up to and including 10 mm dia as in stirrups, spacers and binders etc.and complete all as specified and directed.
M&L RCC 1:1.5:3 using 20 mm graded aggregate in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed. (Reinforcement to be measured separately).
Dismantling of stone sett paving of any description or thickness in floor, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for stone sett flooring with stone settts of size 200 to 250mm long, 150 to 200 mm wide and 150mm deep and sides dressed, bedded in cement mortar 1:3, Joints 20mm thick, grouted in cement mortar 1;2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed.
M&L for stone sett flooring with stone settts of size 200 to 250mm long, 150 to 200 mm wide and 150mm deep and sides dressed, bedded in cement mortar 1:3, Joints 20mm thick, grouted in cement mortar 1;2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush but except stone setts and complete all as specified and directed.
Demolition of brick work built in cement mortar and complete all as specified and directed.
M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall and complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:4, complete all as specified and as directed.
M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed.
Taking down sign boards of any type and any size complete in all respects specification complete all as specified and as directed.
Supply & Fixing of Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc for sign board and complete all as specified and directed. Note: The design of each sign board frame / stand shall be approved by Engineer-in-charge.
Supply and fixing of Retro Reflective sign board made up 1.2mm thick stainless stell sheet of which both faces shall be fully covered with high Intensity Prismatic (HIP) Retro Reflective sheeting of approved specification as per MORTH having approved message (Matter and Base) fully processed by pressure sensitive equipment of approved brand (Avery Dennison / 3M ) fixed on stainless steel frame made up of SS as described in item no 28.00 complete all as specified and directed.
Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ;67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours) Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and directed.
Demolition of PCC in any description and in any position etc complete all as specified at site and complete all as specified and as directed
M&L for PCC 1:4:8 type D2 using 40 mm gdd stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M/S Kharya Associates
M/S A.R BUILDERS
M/S Ritu Tandon
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .