Construction of New Building for Fire and Rescue Service Station at T.Nagar in South Chennai Division (Re-Tender)

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

3.1) C.C.1:5:10 for Foundation & Basement

3.2) P.C.C. 1:2:4 for Foundation & Basement and other similar works

6.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

9.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) b. In Ground Floor

d. In Second Floor

11.2) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

12.1) Brick partition in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

13.1) Filling with Excavated Earth

21.2)) Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3) S & F of Magnetic door catches

25.0) M.S.Holdfast

26.0) Flooring in C.C.1:5:10

28.0) Floor plastering in C.M. 1:4, 20 mm tk.

30) Ellispattern

31.0) Weathering course

33.0) Plastering in C.M. 1:5, 12 mm tk.

34.0) Plastering in C.M. 1:4, 12 mm tk.

35.0) Spl. Ceiling plastering in C.M. 1:3, 10 mm tk.

36.0) Cement mortar Border in C.M. 1:5, 12 mm tk. a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

37.1) White washing 3 coats (slaked)

39.0) M.S Grills

40.0) Painting - New "wood work"

41.0) Painting - New "iron work"

46.0) S & F 20 mm dia Alu. Hanger Rod

47.0) S & F Alu Towel rail 75 cm long

48.0) S & F 5 pin Coat stand

49.0) S & F chromium plated 8 gauge Picture Hook

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

50.5) Supplying. Fabricating and erection of M.S Scheme Name board

52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

59.2) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm

60.0) PVC Nahani trap (4way/2way)

Electrical arrangements 72.0) Box type Fibre Fan hook

73.2) 4 way - D.B.

74.0) Charges for fixing of "Fan"

76.0) 8 SWG wire

77.3) S & F of TV/Telephone line Socket

77.4) S & F of 20mm dia PVC pipe for TV/Telephone line

78.0) Earthing Station IS3043 (Type I)

80) 375 x 300 x 20 mm T.W. plank

86.0) Anti termite treatment

112) S & F of Exhaust Fan 300 mm dia

238.0) Anticorrosive treatment for steel grills

ANNEXURE 2.15) Supplying and filling stone dust

8.2.3.1) Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third floor

15.4) Cuddappa slab 20 mm tk.for C/B slab. a. Ground floor

b. In First floor

c. In Second floor

15.5) Cuddappa slab 40 mm tk.for C/B slab. a. In Ground floor

b. In First floor

c. In Second floor

18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

21.5.2.2) Supply and Fixing Solid UPVC door Shutter with frame

21.5.6.1) Supplying and fixing of solid core flush door shutter of thickness 35mm a). Door size 1.000 m x 2.100m (Single Leaf)

b). Door size 0.900 m x 2.100m (Single Leaf)

21.6.1.1) R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using M30 grade (without vibrating charges) a. 900 x 2100 mm

22.3.2) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

23.1.8) TW styles & rails with 9mm thick BWR single leaf shutters with brass screws of Size 1000 x 2100 mm

29.8) Glazed tiles using Grout (Tile Joint Filler)

29.9) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

31.4) Finishing the top of Terrace floor with one course of solar reflective Ceramic tiles without base concrete

38.4) Two coat of cement paint over one coat white cement

38.6) One coat white cement for new walls and other similar works.

38.8) Two coat of OBD over one coat white cement for inner walls

43.2.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(Binding wire insulated with PVC)

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab using standardised concrete mix M30 grade a). Providing pit

b) Augering 30cm dia

44.6.1) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe(UPVC Special clamp)

52.1.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials a. 32 mm dia

b. 25 mm dia

52.4) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4) S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5) Wash Hand Basin of size 550 x 400 mm (white without pedestal)

54.1.2) S & F of 15mm dia Engineering Polymer Tap (long body)

54.2.2) S & F of 15mm dia Engineering Polymer Tap (short body)

56.4.1) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.1) S & F of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" TRAP

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1) PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC Bend

b. 160 mm dia PVC Bend

62.2.1) PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal Tee

b. 160 mm dia PVC Equal Tee

64.1.2) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. ( PVC Box , Fire Retarded Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1.2) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. (PVC Electrical Box)

66.1.2) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point. (PVC Electrical Box)

67.1) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2.2) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. (PVC Electrical Box)

69.2) Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Electronic Dimmer

77.5) Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7) Run off 2 Wires of 2.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

82.3) Supply and Fixing 30W LED Street light with fittings

84.3) Run off 2 Wires of 4 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1) Supplying and delivery of Three phase ELCB/RCCB

93.1) Plastering with CM 1:3, 12mm with WPC

98.5.1) TW double leaves shutter with brass fittings of size a.1800 x 2100mm

105.3) Run off 4 Wires of 6 Sqmm PVC insulated single core multi strand

144.2.1) Supplying and fixing of 250 Watts Metal halide Flood light etc.,

151.5) Supplying and laying of 3.5 core 70 sq.mm PVC armoured LTUG cable (below GL)

151.6) S&F 3.5 X 70 sqmm LTUG CABLE Above GL

151.7) Supplying and fixing of brass cable gland suitable for 3.5 core 70 Sqmm PVC armoured LTUG cable

151.8) Supplying and fixing of end termination suitable for 3.5 core 70 Sqmm PVC armoured LTUG cable

155.1) Supply and fixing of 125 amps cubical type panel board

207.3.1) Plastic Emulsion paint including primer for outer walls

255.6.2) Supply & fixing of bulk head fitting suitable for 12W bulb

255.7.2) Supplying and fixing of LED Bulb suitable for fixing it to pendent / bakelite battern holder a. 12 watts LED bulb

b. 9 watts LED bulb

344.2) S & F of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.1) Concrete designer tiles flooring

361.5) Vitrified Tiles flooring (Ivory)

367.1) Providing wooden Melamine polish for new wood work

379.8.2) S & F of Granite tile of size 2'x 1', 10mm Thick For (Ruby Red) Flooring b. In First floor

451.1) Supplying and fixing of CP Angle cock including cost of all materials and all labour charges.

451.2) Supply and fixing of Stop Cock

619) Supplying and laying the following GI specials including cost of clamping and labour charges, fixing G I pipes etc complete, all complete and as directed by the departmental officers a) 80mm dia GI pipe

b) 80mm dia GI bend

c) 80mm dia GI Coupling

741.8) Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in Flush with wall with earth connection ( For AC Plug) approved / Superior variety

828.1) Supply and laying of Hard core layer 200mm thick

832.5.2) Supplying and fixing in position of UPVC window of casement type (open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

960.4.5.1) Supply & fixing of 18 watts LED Tube Light of 4' long (Crystal glass)

961) Supplying & fixing of 18" height TNPHC Emblem with approved colour coat in finishing matt.

961.1) Supplying & fixing of Aluminium Letters with approved colour coat in finishing matt a. 12" height

b. 9" height

961.2) Supplying and fixing of plastic foam name plate with vinyl cutting letter with approved colors etc., a. Size - 20" x 5"

b. Size - 24" x 8"

P SELLAPPAGOUNDER

J C ENGINEERING CONSTRUCTION COMPANY

Bidder Name

BHARATH BUILDING CONSTRUCTION

J C ENGINEERING CONSTRUCTION COMPANY

P SELLAPPAGOUNDER