8125/SAR-T-62/2025-26 REPAIR/MAINT OF CERTAIN E/M MISC MAINT WORKS AT 1AFSB DEHRADUN UNDER GE(AF) SARSAWA

Amount

Taking down carefully unserviceable aluminum/copper point wiring (light/ fan/ socket/ power) complete including fittings such as switches, sockets, ceiling roses etc but excluding light fittings and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.

M & L for point wiring with 1.5 Sq mm nominal area PVC insulated and sheathed cable single core FRLS copper cable 1100 Volts with multistranded, copper conductor in and including PVC rigid concealed conduit (heavy grade) including chases cutting as required on site and conduit accessories along with continous earth wire 1.5sqmm PVC insulated and sheathed single core FRLS cable 1100 Volts grade with standard copper conductor and connected to common earth dolly, with and including cadmium plated sunk Modular metal flush boxes for modular switches complete all as specified and directed. One light point controlled by one switch one way. Note: Modular white cover and plate with frame will be measured and paid saperately under respective item.

All as per Item No 2.00 here-in-before but One celling / Exhaust fan point controlled by one switch one way.

All as per Item No 2.00 here-in-before but One socket outlet 5 Amps 5 pin on independent board.

All as per Item No 2.00 here-in-before but One socket outlet 5 Amps 5 Pin on same board with other switches.

All as per Item No 2.00 here-in-before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm complete all as specified and directed by Engr-in-Charge. (circuit to be Paid seperatly )

M & L for point wiring with 1.5 Sq mm nominal area PVC insulated and sheathed cable single core FRLS copper cable 1100 Volts with multistranded, copper conductor in and including PVC non metalic casing capping of size not less than 25 mm ss and all required accessories along with continous earth wire 1.5 sqmm PVC insulated and sheathed single core FRLS cable 1100 Volts grade with standard copper conductor and connected to common earth dolly, with and including cadmium plated sunk Modular metal flush boxes for modular switches complete all as specified and directed. One light point controlled by one switch one way. Note:- Modular white cover and plate with frame will be measured and paid saperately under respective item.

All per Item No 7.00 here-in-before but one ceiling fan point controlled with one 5Amps switch.

All per Item No 7.00 here-in-before but one exhaust fan point controlled with one 5Amps switch.

All per Item No 7.00 here-in-before but one 3 pin socket outlet 5Amps on independant board.

All per Item No 7.00 here-in-before but one 3 pin socket outlet 5Amps on same board with other switches.

All as per Item No 7.00 here-in-before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm complete all as specified and directed. (circuit to be laid seperatly )

S & F in repair modular switch 1 way 6 amps 1 module complete all as specified and directed.

S & F in repair modular socket outlet 2/3 pin 6 Amps combined 2 module complete all as specified and directed.

S & F in repair modular socket 6A/16 A-2/3 pin combined 2 module complete all as specified and directed.

S & F in repair modular switch 1 way 16 amps 1 module complete all as specified and directed.

S & F in repair modular Bell push 6 Amps 1 module complete all as specified and directed.

S & F in repair Buzzer,Ding Dong AC.230 Volts,single pole complete all as specified and directed.

S & F in repair Fan step regulator,120 W -1 module complete all as specified and directed.

S & F in repair Fan step regulator,120 W -2 module complete all as specified and directed.

S & F in repair 2 module white modular cover plate with frame for fixing of modular switches complete all as specified and directed.

All as per Item No 21.00 here-in-above but for 3 module complete all as specified and directed.

All as per Item No 21.00 here-in-above but for 4 module complete all as specified and directed.

All as per Item No 21.00 here-in-above but for 6 module complete all as specified and directed.

All as per Item No 21.00 here-in-above but for 8 module complete all as specified and directed.

All as per Item No 21.00 here-in-above but for 12 module complete all as specified and directed.

S & F blank spacer plate for single module complete all as specified and directed.

S & F in replacement of ceilling fan canopy complete all as specified and directed.

S & F in replacement of fan sheet complete all as specified and directed.

S & F in replacement of MCB distribution board VTPN, 4 way double door type including with MCCB 4 Pole, 63 Amps, 16 KA fixed type as incomer with 200 amp rated bus bar incl lugs/timbles making good the disturbed surface complete all as specified and directed.

Taking down old unserviceable TPN DB and supply & fix in repair MCB distribution board triple pole and neutral 4 way double door factory including MCCB 4 Pole TPN 63 Amp, 16 KA made sheet steel, phosphates, powder coated with 200 Amps rated bas bar, 415 volts, neutral link, earth bar and Din rail and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down old unserviceable DB and supply & fix in repair MCB distribution board single pole and neutral 12 way double door factory made sheet steel, phosphates, powder coated with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down old unserviceable DB and supply & fix in repair MCB distribution board single pole and neutral 8 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail complete including making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down old unserviceable DB and supply & fix in repair MCB distribution board single pole and neutral 6 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail complete including making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down old unserviceable DB and supply & fix in repair MCB distribution board 4 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail single door complete including making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

S & F in repair MCB SP 6 to 32 Amps, 10 KA rating, 240 Volts C Curve type complete all as specified and directed.

S & F in repair MCB DP 32 Amps 10 KA rating, 240 Volts C Curve type complete all as specified and directed.

S & F in repair MCB DP 40 Amps 10 KA rating, 240 Volts C Curve type complete all as specified and directed.

S & F in repair MCB DP 63 Amps 10 KA rating, 240 Volts C Curve type complete all as specified and directed.

S & F in repair MCB TP 32 Amps 10 KA rating, 240 Volts C Curve type complete all as specified and directed.

S & F in repair MCB TP 40 Amps 10 KA rating, 240 Volts C Curve type complete all as specified and directed.

S & F in repair MCB TP 63 Amps 10 KA rating, 415 Volts C Curve type complete all as specified and directed.

S & F in repair MCB TPN 40 Amps 10 KA rating, 415 Volts C Curve type complete all as specified and directed.

S & F in repair MCB TPN 63 Amps 10 KA rating, 415 Volts C Curve type complete all as specified and directed.

M & L for sub-main wiring with two single core FRLS PVC insulated, sheathed, multistranded copper conductor cable of size 4 sqmm 1100 volts grade and including non metallic rigid 25 mm dia PVC casing caping with all fitting and fixing accessories and including PVC insulated sheathed, multistranded copper conductor cable of size 4 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed.

S & F in repair sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug with one SP MCB 20 Amp 240 volt complete all as specified and directed.

S & F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for batten fittings complete all as specified and directed.

S & F in repair plug top 15A, 240 volts complete all as specified and directed.

S & F in repair plug top 5A, 240 volts complete all as specified and directed.

S & F in repair call bell, Ding dong type, 230 volts AC single pole complete all as specified and directed.

S & F in repair fan regulator electronic step/switch/socket type 40 Watts, 1 or 2 module as required as on site ISI marked complete all as specified and directed.

S & F in repair fan regulator electronic rotary type 40 Watts, complete ISI marked complete all as specified and directed.

S & F in repair 6 amps single pole switch one way complete all as specified and directed.

S & F in repair 6 amps single pole switch two way complete all as specified and directed.

S & F in repair bell push 6 A 1 module complete all as specified and directed.

S & F in repair socket outlet 2/3 pin 6 Amps complete all as specified and directed.

S & F in repair socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type four screw pin/ two screw pin as required complete all as specified and directed.

S & F in repair 16 Amps switch one way four screw pin/ two screw pin as required complete all as specified and directed.

S & F in repair switch socket combination multipurpose 2 in 1 for 3 pin 15 Amps & 3pin 5 Amp controlled by one switch flush type complete all as specified and directed.

Taking down old unserviceable/broken hylum sheet and supply and fix in repair hylum sheet of size 5" x 5", 3 mm thick with brass screw and washers complete all as specified and directed.

All as per Item No 60.00 here-in-above but for size 8" x 5" complete all as specified and directed

All as per Item No 60.00 here-in-above but for size 9" x 11" complete all as specified and directed

All as per Item No 60.00 here-in-above but for size 9" x 13" complete all as specified and directed

Taking down old unserviceable/rusted sunken box and supply and fix sunken box size 4" x 4" including making good disturbed surface complete all as specified and directed.

All as per Item No 64.00 here-in-above but for size 7" x 4" complete all as specified and directed

All as per Item No 64.00 here-in-above but for size 8" x 10" complete all as specified and directed

All as per Item No 64.00 here-in-above but for size 10" x 12" complete all as specified and directed

S & F in repair gang box 2 or 3 module as required on site 6 Amp capacity complete all as specified and directed.

All as per Item No 68.00 here-in-above but for gang box 4 module 6 Amp capacity complete all as specified and directed.

All as per Item No 68.00 here-in-above but for gang box 6 module 6 Amp capacity complete all as specified and directed.

All as per Item No 68.00 here-in-above but for gang box 8 module 6 Amp capacity complete all as specified and directed.

All as per Item No 68.00 here-in-above but for gang box 4 module 16 Amp capacity complete all as specified and directed.

S &F in replacement of 20 Watt 6500K LED batten 2000 lumens cool light fitting with extruded aluminium housing four feet with integrated LED & electronic driver and complete all accessories pre-wired including connecting up complete all as directed.

Taking down old broken round sheet from various places and supply and fix in replacement PVC round block complete all as specified and directed.

S & F LED Lamp 7/9 watt complete all as specified and directed.

S & F LED Lamp 12 watt complete all as specified and directed.

S & F in replacement of LED mirror light fitting, 10 Watt, 1000 lumens 6500K comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, IP 20 protection and complete all accessories pre-wired including connecting up complete all as specified and directed.

S & F in replacement bulkhead fitting 5700k, 10 watt capacity, IP 65 rating along with with die cast aluminium housing with complete assembly and PC opal diffuser for uniform illumination suitable for wall/surface mounted complete all as specified and directed.

S & F in replacement recessed mounted 3600lumens, 6500K, 2'x2' LED ceiling light fitting with 60mm width CRCA body, opal acrylic diffuser, electronic driver, system life 50000hrs@L70%, PF 0.95, THD <10%, CRI >80,etc and all accessories pre-wired includingconnecting up complete all as specified and directed.

S & F in repair round ultra sleek surface mounted slim aluminium body LED downlight 18 watts complete all as specified and directed.

S & F in repair square ultra sleek surface mounted slim aluminium body LED downlight 18 watts complete all as specified and directed.

S & F in repair square white powder coated CRCA full glow surface mounted slim aluminium body 2' x 2' LED downlight 36 watts complete all as specified and directed.

S & F in replacement of Recess mounted round LED downlight 6/7 Watt, 1000 lumens, 6500K comprises of aluminium die cast housing, frosted diffuser, integrated electronic driver, IP 20 protection, complete all as specified and directed.

Taking down rusted exhaust fan louver of any type and supply and fix in repair exhaust fan louver of tin/iron sheet body flap suitable for exhaust fan upto 400 mm complete all as specified and directed.

M & L for painting of ceiling fans complete, in situ with synthetic enamel paint by spray painting including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

M & L for painting of exhaust fans complete, in situ with synthetic enamel paint by spray painting including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

M & L for dismantling ceiling fans for servicing from any location and thoroughly checking the nuts, bolts and rubber reel if necessary replace the defective items, including cleaning the fans Re-fixing the same at the location complete all as specified and directed.

Rewinding of unserviceable ceiling fans of size1200/1400mm sweep with approved copper enamelled wire of suitable gauge, varnishing, replacing existing split/quater pins, rubber bushing, capacitor 2.5 Mfd and testing complete all as specified and directed.

Rewinding of exhaust fans of size 225/300 mm sweep with approved copper enamelled wire of suitable gauge varnishing replacement of capacitor, rubber packing, suitable size bearing , bush etc and testing complete all as specified and directed.

S & F in repair and replacement of wall mounted fan blade of any capacity and size complete all as specified and directed.

S & F in repair and replacement of Fan motor of wall mounted fan of any capacity, connection and make it functional, complete all as specified and directed.

S & F in replacement of condenser 2.5 mfd complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cm x60 cm x6.0 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs deep below ground level) with top edge of the plate not less than 1.50 Mtr below normal ground level connected to galvanized earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 connected to earthing test point and from earth test point to the equipment as directed with single core copper flexible cable from earthing to load in heavy duty PVC conduit and copper thimble at both end properly crimped complete all as specified and directed.

Inspection and maintenance of water heater (Geysers) of capacity, 25 ltrs to 50 litres including performing the following task at different locations at AF Stn Sarsawa. (a) Removing the heater plate assembly and descaling the heating element/pipe either by use of acid or equa cleaner to make it functional complete. (b) Checking and setting of thermostat between 70 to 80 degree Celsius. (c) Check working of NRV stop cock, pressure release valve and servicing carefully to make it functional. (d) Repairing of earthing connection, power switch, socket connection replacement of indicator lamp to make it functional. (e) Examine water leakage and rectifying as required and replacement of rubber washer gasket etc to make it functional. (f) Inspect over flow vent pipe, safety valve and remove blockage if required to make it functional.

S & F of copper heating element ISI marked of rating 2 KW to geyser upto 25 to 50 litres capacity, any type, as required on site complete all as specified and directed.

S & F in repair inner tank of any type made out of cold rolled pure electrode type copper sheet double lapped welded internally and hydraulically tested for geyser 35 litres capacity complete all as specified and directed.

S & F in repair inner tank of any type made out of cold rolled pure electrode type copper sheet double lapped welded internally and hydraulically tested for geyser 25 litres capacity complete all as specified and directed.

Supply only of the thermostat (adjustable type) suitable for upto 50 litres capacity of geysers complete all as specified and directed.

S & F in replacement of geyser plate assembly suitable for 25 to 50 litres capacity geysers, of brass with inlet, outlet pipe, drain plug, thermostat chamber fixing heating element gasket nut, bolt etc are fixing the assembly to make it functional complete all as specified and directed.

S & F in repair of flexible PVC pipe connection, nylon thread reinforced 15 mm dia, 450 mm long with brass union at both ends for 15 mm dia pipe complete all as specified and directed.

Supply and replacement of fusable plug complete all as specified and directed.

Supply only gasket of thickness 5 mm for geyser assembly of 08 holes/09 holes as required on site complete all as specified and directed.

S & F in repair indicating lamp for geyser rectangular type complete all as specified and directed.

S & F in repair indicating lamp for geyser round type complete all as specified and directed.

S & F non return valve for geyser complete all as specified and directed.

M & L for preparation of body of geyser for painting complete outer surface of any size/capacity with one coat of synthetic enameled paint complete all as specified and directed.

Dismantling/taking out the geyser assembly & copper tank and making soldering & brazing of tank and fixing the same in the geyser of any cap complete all as specified and directed.

S & F 3Way-UVPro MCB power enclosure Weatherproof IP 65 including isolator 25 amp and MCB 10 amp Suitable for Outdoor use Waterproof PVC Enclosure with Cover Against Water Splash Outdoor IP65 complete all as specifed and directed.

Supply,laying and connection of Ductile iron pipe in replacement with spigot and socket end suitable for rubber gasket tighten joint centrufugally cast, class LA in any length laid in trenches of 100 mm bore dia including cutting the existing pipe with suitable joints complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm bore including cleaning for re-fixing or removal from site complete all as specified and directed.

All as per Item No 110.00 here-in-above but for 25 mm bore pipe.

All as per Item No 110.00 here-in-above but for 40 to 50 mm bore pipe.

S & F in replacement of unserviceable 20 mm bore tube medium grade galvanized with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified and directed.

All as per Item No 113.00 here-in-above but for 25 mm bore pipe complete all as specified and directed.

All as per Item No 113.00 here-in-above but for 40 mm bore pipe complete all as specified and directed.

All as per Item No 113.00 here-in-above but for 50 mm bore pipe complete all as specified and directed.

All as per Item No 113.00 here-in-above but for 80 mm bore pipe complete all as specified and directed.

All as per Item No 113.00 here-in-above but for 100 mm bore pipe complete all as specified and directed.

Dismantling all electrical connection from centrifugal pump and motor of capacity 35 HP, 415 Volts, 50 Hz, removing coupling, servicing pump, greasing, replacing worn out bearings, packing/gland and refit after completion of work complete all as specified and directed.

M & L for rewinding of motor starter or rotor of 35 HP capacity, 415 Volts, 50 Hz after removing the burnt out winding wire completely, cleaning the slots of stater or rotor throughly and rewinding with same gauge, number of turns, weight of super enamelled specified and directed.

S & F in replacement stop valve copper alloy , screwed down, high pressure with crutch or butterfly handle screwed both ends, 20 mm bore including fittings and fixtures, as required, complete all as specified and directed.

S & F gun metal globe or gate valve of 50 mm complete all as specified and directed.

All as per Item No 122.00 here-in-above but for 40 mm bore complete all as specified and directed.

All as per Item No 122.00 here-in-above but for 25 mm bore complete all as specified and directed.

All as per Item No 122.00 here-in-above but for 20 mm bore complete all as specified and directed.

S & F in replacement CI sluice valve class PN-1.6 type of size 80 mm dia ISI marked with iron wheel head brass spindle. Confirming to IS-14846 flanged ends including rubber joints and jointing material all as required at site including any addition alteration for fixing at site complete all as specified and directed.

All as per Item No 126.00 here-in-above but for size of 100 mm dia complete all as specified and directed.

All as per Item No 126.00 here-in-above but for size of 150 mm dia complete all as specified and directed.

S & F in replacement gun metal valve (ISI marked) with spindle and CI wheel, both ends flanged, 80 mm bore including fittings and fixtures, as required complete all as specified and directed.

Taking out old unserviceable sluice valve by opening the flanged joints, of 80 mm to 150 mm bore, including cutting the existing pipe, threading, welding etc after dismantling the existing floor, road if required including excavation and earth work complete all as specified and directed.

M & L for cutting into the existing CI pipe 150/100 mm bore, in position for insertion of Tee, junction etc, of any size, for diversion the pipe line, including necessary excavation and earth work complete all as specified and directed.

S & F in replacement cast iron fitting such as bends (any type , radius and angle), tapers any type, tee, Y junction, collar , tail piece, dummy plate etc flanged and/or socket ends required upto 150 mm bore pipes including joints and jointing materials for run lead joints and flanged joints complete all as specified and directed. Note: Run lead joints shall be measured and paid separately.

Repairing the run lead joints by burning out and taking out the existing run lead and filling the joint with pig lead/lead wool and caulking properly for 150mm bore CI pipe including necessary excavation and earth work complete all as specified and directed. Note: New Run lead shall not be less than 3.500 Kg per joint and spun yarn 0.30 Kg per joint.

Taking out the unserviceable non return valve 150 mm dia by opening of flange joints supply fixing inreplacement of non return valve 150 mm dia cast iron flanged ends complete with joints and jointing materials complete all as specified and directed.

All as per Item No 134.00 here-in-above but for non return valve 100 mm dia complete all as specified and directed.

Taking out old unserviceable Air release valve 100 mm dia by opening of flange joints supply and fix in Air Release valve for 100 mm dia including GI flanged Bolts/Nuts/washers gasket etc all and removal of old valve and fixed complete all as specified and directed.

S & F in repair in replacement to foot valve 100 mm dia in position by replacement of UNSV parts such as Brass ring packing/Rubber packing , nuts, bolts, washers rubber insertion sheet complete all as required to make it functional complete all as specified and directed.

S & F in repair in replacement of Power contactor 3 pole MNX 95/110 of any capacity as per site requirement star delta pump starter with all connected items including connection, commisioning and testing complete all as specified and directed.

S & F in repair in replacement of Power contactor 3 pole MNX 50/70 of capacity as per site requirement of star delta pump starter with all connected items including connection, commisioning and testing complete all as specified and directed.

S & F in repair in replacement of Power contactor 3 pole MNX 25/32 of capacity as per site requirement of star delta pump starter with all connected items including connection, commisioning and testing complete all as specified and directed.

S & F in repair and replacement of Push Start/Stop button Star Delta pump complete all as specified and directed.

S & F PVC insulated 3 core summersible flat cable of size of 25 sqmm for 27.5 HP and 35 HP summersible pumps complete all as specified and directed.

M & L for Cleaning of Over Head water tank of capacity 50000 Gallon complete all as speciefied and as directed by Engr -in-charge.

M & L for Cleaning of Under Ground sump of capacity 50000 Gallon complete all as specified and directed by Engr-in-charge.

Labour only for lifting/taking up of defective submersible pumping set of capacity 27.5 HP-60HP from tube well 110 meter deep approximate dismantling of connected raising main, non return valve, bend etc from delivery of pumping set, lifting of column pipe of size 150/ 100 mm fixed with pumping set column pipe from socket/flange cutting of welded slip unscrewing of cable, holding clamps and disconnecting of submersible cable joint complete and refitting the mortor and pump set and connection with necessary cables and pipes with nuts bolts and lowering the same complete all as specified and directed.

Supply and replacement of stainless steel nuts and bolts 5/8 inch dia, 3 inch long, CRC washer 3 mm thick having 16 mm internal dia and 40 mm outer dia complete all as specified and directed.

Dismantling of motor and pump of capacity 60 HP in to part for repair and over hauling assembling of motor including rotor turning, grinding, polishing and balancing the motor and pump including repair to shaft by means of grinding, polishing and balancing of pump after necessary repair and testing complete all as specified and directed.

Supply only winding kit with insulating material of 60 Hp Motor complete all as specified and directed.

Supply only bearing bush set of 60 Hp Motor complete all as specified and directed.

Supply only thrust bearing of 60 Hp Motor complete all as specified and directed.

Supply only GM impeller of 60 Hp pump complete all as specified and directed.

Dismantling of motor and pump of capacity 27.5 HP in to part for repair and over hauling assembling of motor including roter turning, grinding, polishing and balancing the motor and pump including repair to shaft by means of grinding, polishing and balancing of pump after necessary repair and testing complete all as specified and directed.

Supply only winding kit with insulating material of 27.5 Hp Motor complete all as specified and directed.

Supply only bearing bush set of 27.5 Hp Motor complete all as specified and directed.

Supply only thrust bearing of 27.5 Hp Motor complete all as specified and directed.

Supply only GM impeller of 27.5 Hp pump complete all as specified and directed.

Supply only Calcium based granual chlorination chemical (Altoch-GP) for water treatment 60% to 70% availablen chlorine must contain appropriate quantities of despensants/corrosion inhibitors to note contractor/supplier must submit toxicity free report from Govt institute test report of calcium hypochlorite alongwith each delivery all as specified and directed. Make : Rayalaseema/Declibac Technology or equivalent

M & L for Collecting water sample from any pump houses at 1 AFSB in sterilized glass jar and get it bactoroligical/ chemical analysis test from Govt/Approved laboratory complete all as specified and directed.

Supply only Chlorine Test Kit ranging from 0.05 - 5mg/l complete all as specified and directed.

M & L in replacement valve pit chamber of size 1200x1200x1200 mm internal dimension, 6 mm thick MS steel cover with 2 Nos MS hinges suitable size welded with angle iron frame of 40x40x6 mm thick with lifting hooks and locking arrangement complete with necessary earth work, brick work in cm (1:6) 230 mm thick PCC bed (1:4:8) type D-2, 15 mm thick cement plaster in cm 1:4 internal surface complete and external surface of wall upto 300 mm front top and applying a coat of black bituminious paint to the steel surface complete incl demolition and removal of old u/s valve pit complete all as specified and directed.

All as per Item No 160.00 here-in-above but of size 900 x 900 x 900 mm complete all as specified and directed.

All as per Item No 160.00 here-in-above but of size 600 x 600 x 600 mm complete all as specified and directed.

Supply only O-Tolidine Reagent (OT Solution) for chlorination testing of 500 ml bottle complete all as specified and directed.

Service and repair of Chlorination Dosing Pump Electronic diaphragm type; flow adjustable; capacity: 0–50 LPH; discharge pressure: 1 kg/cm²; voltage: 230V, single phase, 50Hz; wetted parts: PP; diaphragm: PTFE backed by Hypalon Installed in Pump house of any make any size completed all as specified and directed by Engr-in-Charge. Note : Replacement of worn out/unserviceable parts shall be measure separately and paid under respctive items.

S & F in repair in replacement of Gearmotor Squirrel cage motor; 415V, 3-phase, 50Hz; top-mountedcomplete 230 V 50 Hz, suitable for Altoch decrine dosing pump complete all as specified and directed.

S & F in repair and replacment of Chlorine Mixer rod as per existing description complete as specified and directed.

S & F NRV for dosing pump complete as specified and directed.

S & F White Suction/discharge tubing 3/8" complete as specified and directed.

Taking down old unserviceable pump house board and supply and fix in repair glow sign board showing "PUMP HOUSE NO-3 AGE B/R (AF) DEHARDUN" with radium letter of size 6 x 4 inch covering complete length of main entrance gate frame of stainless steel of size 11.5 x 2 x 0.5 feet along with 04 nos LED tuble light 20 watt capacity for night illumination complete all as specified and directed.

Taking out old unserviceable water meter by opening of flange joints supply and fix in Water Meter suitable for 100 mm dia including GI flanged Bolts/Nuts/washers gasket etc all complete all as specified and directed.

AIR CONDITIONERS: Comprehensive maintenance of air conditioner split type 1.5/2 tonne capacity of any make including performing following tasks at different locations at 1 AFSB Stn:- (a) Inspection, taking down, removing grills and outer housing. (b) Descaling indoor/out door unit fins by means of water pressure technic, brushing and cleaning thoroughly and replacing filter pad of AC. (c) Servicing the cooling fan by greasing/oiling the bearing, bushes after opening the motor, cleaning the armature, checking and tightening all nuts and bolts etc. (d) Checking, rectifying the connection, working of thermostat assembly, relay, condenser, heater assembly, compressor and earth connection etc including replacing defective wire and sleves etc. (e) Re-fixing AC and outer unit of in position, after assembling including packing as required at site and testing complete to make it functional. Note: Supplying and replacement of parts shall be measured and paid separately.

Gas charging of spilit type AC with gas R-22/F-32 after cleaning including making necessary connection, vacumising, brazing, soldering, welding the copper tube and testing on completion complete all as specified and directed.

S & F of running capacitor 36/45/50 MFD including testing complete all as specified and directed.

S & F of starting capacitor 100/120 MFD including testing complete all as specified and directed.

S & F of starting relay for AC of capacity 1.5 TR complete all as specified and directed.

S & F in replacement compressor assembly (sealed unit) for air conditioner spilit type 1.5 tonne capacity including filling/charging of gas complete all as specified and directed. Note: Gas charging shall be measured and paid separately.

S & F in replacement compressor assembly (sealed unit) for air conditioner spilit type 2 tonne capacity including filling/charging of gas complete all as specified and directed. Note: Gas charging shall be measured and paid separately.

S & F in replacement of blower indoor unit of AC of any capacity and supply and fix new blower complete all as specified and directed.

Supply and replacement of capillary tube complete all as specified and directed.

S & F in replacement of all coils of blower motor of AC 1.5 tonne split AC with super enamel copper winding wire of proper gauge, weight etc (having same No’s of turn) winding, using insulating material varnishing, heating, re-assembling the motor after making it functional and testing complete all as specified and directed.

All as per Item No 180.00 here-in-above but for 2 tonne split AC complete all as specified and directed.

S & F in repair wiring kit for AC 1.5/2 ton cap of any make complete all as specified and directed.

S & F starting relay for AC of capacity 2.0 TR complete complete all as specified and directed.

S & F in repair thermostate switch for AC 1.5/2 ton cap complete all as specified and directed.

S & F in repair sensor remote switch for AC 1.5/2 ton complete all as specified and directed.

Taking out the old/unserviceable heating element from the machine and S&F reversable unit (Hot and Cold) complete all as specified and directed.

M & L for shifting of split type AC of any capacity from one place to another place along with taking down indoor/outdoor unit carefully and re-fixing the same as required incl making good the disturbed surface with existing distumber/paint complete all as specified and directed.

S & F in replacement of out door unit PVC insulated grill to protect the fan blade complete all as specified and directed.

S & F in replacement of copper pipe 1/2 inch along with brazing complete complete all as specified and directed.

S & F in replacement of copper pipe 3/4 inch along with brazing complete complete all as specified and directed.

S & F in replacement of PVC insulation foam over copper pipe any size complete all as specified and directed.

S & F in replacement of PVC inlet hose tube pipe for window/split type AC along with suitable clamps complete all as specified and directed.

Supply and replacement of indoor/outdoor PCB for card 1.5/2 Tonne capacity of any type/model complete all as specified and directed.

S&F in replacement of outer unit Split AC stand made of 2 mm thich high grade steel with suitable fasteners complete including making food the distrubed surface complete all as specified and directed.

WATER COOLER: Comprehensive maintenance of water cooler various capacity including performing following tasks at different locations at AF Stn Dehradun :- (a) Inspection, dismantling front and rear shutters disconnecting electric and water connection. (b) Cleaning thoroughly the body of water cooler including cleaning of cold water tank with bleaching powder solution (c) Servicing of cooling fan by greasing to bearing, oiling to bushes after opening the motor. (d) Checking/rectifying the connection and working of thermostat relays, condenser, evaporator, capacities, switches, electrical connection, float valve, compressor earth connection including replacement of defective wire sleeves etc. (e) Replacement of PVC drain pipe from water cooler tray to neared drain. (f) Reconnecting power and water lines and testing to make it functional complete all as specified and as directed. Note : Gas charging shall be measured and paid for separately.

Gas charging the water cooler with gas F-22 capacity 40/80/60/150 litres capacity including making necessary connection, testing etc to make it functional complete all as specified and directed.

Supply and replacement of starting relay for water cooler any cap to make functional complete all as specified and directed.

Supply only of running capacitor 60/80 MFD for water cooler complete all as specified and directed.

S & F in replacement sealed compressor unit for 40 Ltrs cap single phase, 230 V and for water cooler, welding/ brazing of gas pipe line, vaccume/ pressure leakage testing etc,Supply and charging of refrigerant gas of adequate quantity complete and testing incl taking down the old U/S sealed unit compessor complete all as specified and directed.

S & F Gun metal gate valve with iron wheel head screwed both ends suitable for GI pipe of size 15mm dia bore all as specified and directed.

S & F stop valve with crutch or butterfly handle screwed down screwed both ends suitable for GI pipe of size 15mm dia bore all as specified and directed.

REFRIGERATOR/DEEP FREEZER Comprehensive maintenance of refrigerator/Deep Freezer of any capacity make etc by performing the following tasks complete all as specified and directed:- (a) Cleaning the refrigerator from inside with bleaching powder solution including cleaning the attached trays. (b) Cleaning the complete body thoroughly checking relay and rectifying the functioning of relays, compressor, thermostat electrical connection and condenser pipe including, checking and tighten of all bolt and clamp. Note: Supplying and replacement of parts shall be measured and paid separately.

S & F of starting relay suitable for refrigerator of any capacity complete all as specified and directed.

S & F only of thermostatic switch with defrosting arrangement suitable for refrigerator of any capacity make and size complete all as specified and directed.

S & F in Replacement of electronic chip(PCB) including defrost timer,biometal for refrigerator of capacity 165 to 315 ltrs of LG/Samsung complete all as specified and directed.

M & L for Gas charging of refrigeratorof any capacity including making necessary connection, testing complete all as specified and as directed.

S & F in replacement sealed compressor unit for Refrigerator/Deep freezer single phase, 230 V and welding/brazing of gas pipe line, vaccume/ pressure leakage testing etc,Supply and charging of refrigerant gas of adequate quantity complete and testing incl taking down the old U/S sealed unit compessor complete all as specified and directed.

All as per Item No 209.00 here-in-above but capacity of 1.0 KVA complete all as specified and directed.

All as per Item No 209.00 here-in-above but capacity of 2.0 KVA complete all as specified and directed.

All as per Item No 209.00 here-in-above but capacity of 4/5.0 KVA complete all as specified and directed.

M & L for Rewinding of voltage stabilizer single phase AC 230 volts 50 C/S with super enemalled copper wire of suitable guage to match with the existing one including all related work and testing complete of size capacity upto 5 KVA complete all as specified and directed.

DESERT COLLER Comprehensive maintenance of desert cooler of any type and any make, fixed at different location at 1 AFSB Dehradun including taking down, cleaning gall dirt, dust, oiling of motor and pump, checking of parts, change water seal gasket/rubber including replacement of nuts bolts, screw etc and preparation of the desert cooler body and tank by scrubbing the old paint and spray painting with two coat of synthetic enamel paint and spray painting with two coats of synthetic enamel paint complete all as specified and directed. Note: Supply and replacement of major parts shall be measured and paid separately.

Supply only of show grill of any size make and capacity of desert cooler of PVC of make as approved by GE complete all as specified and directed.

Supply only of wood wool pads of best quality as approved with and including wire mesh jalli for desert cooler of any size make and capacity complete all as specified and directed.

S & F in replacement of PVC elbows of suitable size complete all as specified and directed.

S & F in replacement of PVC pipe of superior quality 15 mm dia suitable for desert cooler complete all as specified and directed.

S & F cooler regulator of required size complete all as specified and directed.

S & F in replacement of fan motor for desert cooler complete with blade, locknut, with all accessories 220/250 Volt of complete all as specified and directed.

S & F in replacement of desert cooler pump motor 230/250 Volt, 50 C/S complete with mounting accessories complete all as specified and directed.

S & F in replacement of indicating lamp for motor and pump including holder complete all as specified and directed.

S & F in replacement of fan mounting bracket set as required for desert cooler complete all as specified and directed.

SOLAR WATER HEATER M & L for disconnection of electric supply and water pipe line connections and taking out all type of clamp, nut bolt or connected fixing accessories from the existing position of each solar plate from solar heating collector plate system and removing all fixing accessories like aluminum side frame cladding ,heating top glass with rubber packing materials , copper fins with tubing plates jal assembly for the proposed of cleaning in side / removing blockage / depositing the scale sult, sludge, dirt etc particle material from in side of copper tubes jal assembly including cleaning ,checking, serviving , tighting , adjusting and also calibration and descaling through chemical acid solution method / manually mechanically system for making of nos of hole on each blockage copper tube assembly through suitable size of drilling rod with cleaning of wire brush in each copper tubing system and their after duly fill up the all nos of making hole work in copper tubes through hot & cold welding / brazing (gas or electric welding) work system and applying two coats of black bituminous paint over on distrubed place of copper fin and tubing jal system and after circulation of chemical acid solution through proper pressure washing pump in complete entire system and also rectification the leakage problem of entire tube system complete and after repair reaasembly and proper filling the all replacement item like insulation wool and aluminium foiling Glass work in side and around the collector plate system and replacement of defected nut, bolt & washer and fixing on same position and testing on system complete all as specified and directed. NOTE: (i) Spare parts will be measured and paid separately under respective items of BoQ. (ii) Descaling, driiling ,Servicing, adjusting etc and testing run work will be carried out by well qualified techanician having good experience in the about repairing field of solar water heating system .

Taking down old unserviceable/broken existing solar panel of any size any capacity and fix in replacement of solar panel of same size as per existing capacity as per the site requirement including all connectors, connection testing complete all as specified and directed.

Taking down old unserviceable digital timer and Supply and fix in repair digital 2 ACl timer switch, installing, testing and comissioning complette all as specified and directed.

Taking down old unserviceable ball valve and supply and fix in replacement Ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20mm bore, ISI marked, in replacement complete all as specified and directed.

S & F in replacement of old u/s Aluminium foil rapping work in side of solar heating collector each panel plate system as per existing size and type including providing of adaptor solution material including taking down existing broken/defected aluminium foil complete all as specified and directed.

S & F in replacement of old u/s Insulation material suitable for filling of inside of solar heating collector panel plate system and solar tank, and it connecting hot pipe lines system proposed including taking down existing insulation material complete all as specified and directed.

S & F in replacement of old u/s MS flanges fitted GI nipple of size 20 mm dia up to 4 inch long as per existing size and type complete all as specified and directed.

S & F in replacement of old u/s Rubber hose pipes of size 20 mm dia ,150 mm long with adaptor clamp as per existing size and type complete all as specified and directed.

S & F of heating element ISI marked of rating 3 KW suitable for existing solar water heater 500 ltrs capacity including testing complete all as specified and directed.

M & L for Excavation in trenches in soft/loose soil n.exc 1.5mtr deep and n excl 1.5 mtr wide for laying of HT/LT cable, pole, etc and getting out including of dressing / trimming sides and levelling, grading and ramming of bottom excavation complete all as specified and directed.

M & L for fine dry sand cushioning for underground cable by providing a layers of sand 8 cm deep before laying and 15 cm deep after laying the cable including streching the cable complete all as specified and directed.

M & L forlaying of bricks sub class 'B' old size laid flat perpendicular to the direction of cables for protection complete all as specified and as directed.

Returning filling in including spreading, leveling watering and well ramming in layers not exc 25 cm thick each layer in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) not exc. 50 m and depositing where directed at a level not exc.1.5 mtr above the starting point complete all as specified and directed.

Demolition cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M & L for PCC (1:2:4) type using 20 mm aggregate block masonry with solid block for copping above ground level complete all as specified and directed.

Repair to road cutting on PCC path by providing (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in 10 cm thick slab complete all as specified and directed.

M & F for cutting of road/ hard standing up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of cable protection pipe including making good the disturbed road/hard standing by providing PCC (1:2:4) type B-1 to much the existing surface level complete all as specified and directed.

M & L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation, filling mass concrete including necessary form work complete all as specified and directed.

Supply & lay 40 mm grade GI tubing light grade in replacement for protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed.

All as per Item No 243.00 here-in-above but 80 mm dia complete all as specified and directed.

M & L in replacement, UG LT electric cable (heavy duty), 11000 volts (earthed), XLPE insulated, armoured, electric power cable with aluminium conductor of cross sectional area 120 sqmm, 3.5 core conforming to IS-7098 (Part-I) 1988 laid as in trenches/ pipes/ ducts of fixed along poles/ walls etc including necessary cable lugs, bolts, nuts and washers complete all as specified and directed.

All as per Item No 245.00 here-in-above but cross sectional area 95 sqmm, 3.5 core complete all as specified and directed.

All as per Item No 245.00 here-in-above but cross sectional area 70 sqmm, 3.5 core complete all as specified and directed.

All as per Item No 245.00 here-in-above but cross sectional area 50 sqmm, 3.5 core complete all as specified and directed.

All as per Item No 245.00 here-in-above but cross sectional area 35 sqmm, 3.5 core complete all as specified and directed.

All as per Item No 245.00 here-in-above but cross sectional area 25 sqmm, 3.5 core complete all as specified and directed.

All as per Item No 245.00 here-in-above but cross sectional area 16 sqmm, 3.5 core complete all as specified and directed.

All as per Item No 245.00 here-in-above but cross sectional area 10 sqmm, 3.5 core complete all as specified and directed.

S & F in replacement Lugs compatible for 10 sqmm to 25 sqmm cable complete all as specified and directed.

S & F in replacement Lugs compatible for 35 sqmm to 50 sqmm cable complete all as specified and directed.

S & F in replacement Lugs compatible for 70 sqmm to 120 sqmm cable complete all as specified and directed.

S & F in replacement of cable jointing STRAIGHT THROUGH JOINT for 1100V grade cable for straight through joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3.5 core XLPE armoured, alluminum conductor cable of size 10-70 sq mm complete all as specified and directed.

All as per Item No 256.00 here-in-above but size of cable upto 95-120 sq mm complete all as specified and directed.

S & F in replacement of LT route indicator duly painted with two coat of grey colour synthetic enamel paint duly pain over one coat of red oxide primer, oval shape of size 200mm x 150mm x 6mm thick cast iron disc with letters LT cable ( as required on site, LT - Blue colour) embosed and fixed on 25mm x 25mm x 5mm thick MS angle 50cm long including necessary PCC in (1:3:6) type C-1 cement concrete and 15 cm thick plastering all around upto below ground level of size 650mm x 300mm x 250mm complete all as specified and directed.

M & L for replacement of out door type LT Feeder pillar box made out from 3.15 mm MS sheet ,and angle iron frame , dust and vermin proof , including provision of aluminium bus bar fixed on LT bushing of desired capacity and having suitable provision for connecting up to size 120 sq mm 3 Nos complete with foundation work and making cable connection with suitable size of cable galands all as specified and directed. Note: (i) Panel shall be mounted on brick work plate form duly plastered and PCC copping work on top surface , height shall be 0.45 m above the GL and 0.40 M all around the FPB all as per direction of Engr-in-Charge.

S & F in replacement MCCB Triple Pole 63 Amp 415 volt rupturing capacity not less than16 KA complete all as specified and directed.

S & F in replacement MCCB Triple Pole 125 Amp 415 volt rupturing capacity not less than 16 KA complete all as specified and directed.

S & F in replacement MCCB Triple Pole 200 Amp 415 volt rupturing capacity not less than 25 KA complete all as specified and directed.

S & F in replacement MCCB Triple Pole 250 Amp 415 volt rupturing capacity not less than 36 KA complete all as specified and directed.

S & F in replacement MCCB Triple Pole 315 Amp 415 volt rupturing capacity not less than 36 KA complete all as specified and directed.

S & F in replacemtn of MCB DP 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning complete all as specified and directed.

S & F in replacemtn of MCB TPN/4P 40-100 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning complete all as specified and directed.

M & L for repair/welding/bracing works required at site for unserviceable/broken/damaged LT Panel etc. Replacement of broken hinges if any. The size of repairable panel not exceed 2.0 mtr x 1.8 mtr x 0.6 mtr. The repairable panel are installed at various location under AF STN Dehradun. The repair work includes two coats of synthetic enamel paint complete all as specified and directed.

M & L for applying two coats of superior quality synthetic oil paint on all exposed surface and internal portion of LT distribution panels including after necessary surface preparation of old painted surface complete including marking stencil letter writing with highly fluorescent sheet best quality directly stick to panel as marking /identification of circuits/Area of supply height between 15 mm to 20 mm group of letter Not more than 15 letters in each incoming and outgoing MCCBs or distribution cables complete all directed.

Supply, install, test and commissioning of LT Panel board in replacement made out of 3.15 mm CRCA Sheet outdoor type CPRI tested cubical type totally enclosed wheather dust and vermin proof with front and rear opening of 415 Volts 3 phase 4 wire 50 Hz having 4 pole copper bus bar capacity 200 Amps insulated with heat shrinkable sleeves RYB including internal wiring with copper conductor powder coated including connecting all in coming and out going cable feeders with necessary lugs ferrules etc . The panel should have angle iron support on the base all around including PCC foundation support , well finishing with cement mortar.Comprising of the following switchgear and accessories are as under:- The panel should have angle iron support on the base allaround including pcc foundation support , well finishing with cement mortar.Comprising of the following switchgear and accessories are as under:- (1) Mains Incomming : (a) MCCB 160 Amps with thermal based release 4 Pole 25 KA -01 No (2) Outgoing : (a) MCCB 125 Amps with thermal based release 3 Pole 16 KA-01 Nos (b) MCCB 100 Amps with thermal based release 3 Pole 16 KA-01 Nos (c) MCCB 63 Amps with thermal based release 3 Pole 16 KA-02 Nos (d) MCB DP 63 Amps with thermal based release -04 Nos (e) Multifunctional digital Amp meter, digital Vol meter etc-01 No (c) RYB indicating lamp in each out going feeder-01 Job Note: (i) Panel shall be mounted on brick work plate form duly plastered and PCC copping work on top surface , height shall be 0.45 m above the GL and 0.40 M all around the FPB all as per direction of Engr-in-Charge. (ii) All incoming and out going cables shall be connected with suitable size of cable luggs and cable galands etc.

Supply, install, test and commissioning of LT Panel board in replacement made out of 3.15 mm CRCA Sheet outdoor type CPRI tested cubical type totally enclosed wheather dust and vermin proof with front and rear opening of 415 Volts 3 phase 4 wire 50 Hz having 4 pole copper bus bar capacity 250 Amps insulated with heat shrinkable sleeves RYB including internal wiring with copper conductor powder coated including connecting all in coming and out going cable feeders with necessary lugs ferrules etc . The panel should have angle iron support on the base all around including PCC foundation support , well finishing with cement mortar.Comprising of the following switchgear and accessories are as under:- The panel should have angle iron support on the base allaround including pcc foundation support , well finishing with cement mortar.Comprising of the following switchgear and accessories are as under:- (1) Mains Incomming : (a) MCCB 200 Amps with thermal based release 4 Pole 25 KA -01 No (2) Outgoing : (a) MCCB 100 Amps with thermal based release 3 Pole 16 KA-02 Nos (b) MCCB 63 Amps with thermal based release 3 Pole 16 KA-02 Nos (c) MCB TP 63 Amps with thermal based release -03 Nos (d) Multifunctional digital Amp meter, digital Vol meter etc-01 No (e) RYB indicating lamp in each out going feeder-01 Job Note: (i) Panel shall be mounted on brick work plate form duly plastered and PCC copping work on top surface , height shall be 0.45 m above the GL and 0.40 M all around the FPB all as per direction of Engr-in-Charge. (ii) All incoming and out going cables shall be connected with suitable size of cable luggs and cable galands etc.

M & L earthing complete with galvanized steel earth plate electrode 60cm X 60cm X 6mm thick buried directly vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of earth plate not less than 1.5 mtr below ground level surrounded from all sides by 15cm thick packed layer of Charcoal dust & common salt filled in alternate layers and electrode connected to galvanised iron strip 32×6 mm upto 7.5mtr long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly and including watering pipe medium grade GI 20mm bore & protection pipe light grade GI 15mm bore, including wire mesh, funnel, lugs, salt, charcoal dust, excavation in any type of soil, returning filling & removal of surplus soil upto 50 mtr, pit chamber shall be of PCC (1:2:4) type B-1 (using 20 mm graded mechnically crushed stone aggregates) and pit cover slab 40mm thick shall be of Precast RCC (1:2:4) type B-1 (using 20 mm graded mechnically crushed stone aggregates) reinforced with XPM weighing not less than 4Kg/sqm including necessary form work complete all as shown in electrical plate No 3 of SSR part-I, including testing on completion at site complete all as specified and directed. Notes: (i) On testing if the desired earth resistance is not obtained, earthing will be generated at no extra cost , till the desired earth resistance is obtained. (ii) The chamber shall be constructed atleast 1.5 mtr away from the earth electrode.

Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed.

Supply in replacement of Fuel Filter suitable for kirloskar DG sets of capacity 200 KVA complete all as specified and directed.

All as per Item No 274.00 here-in-above but DG set capacity 160 KVA complete all as specified and directed.

All as per Item No 274.00 here-in-above but DG set capacity 76/62.5 KVA complete all as specified and directed.

All as per Item No 274.00 here-in-above but DG set capacity 50/15 KVA complete all as specified and directed.

S & F in repair of Air Filter suitable for Kirloskar DG set of capacity 200 KVA complete all as specified and directed.

All as per Item No 278.00 here-in-above but DG set of capacity 160 KVA complete all as specified and directed.

All as per Item No 278.00 here-in-above but DG set capacity 76/62.5 KVA complete all as specified and directed.

All as per Item No 278.00 here-in-above but DG set capacity 50/15 KVA complete all as specified and directed.

S & F in repair of Oil filter suitable for Kirloskar DG set of capacity 200 KVA complete all as specified and directed.

All as per Item No 282.00 here-in-above but DG set of capacity 160 KVA complete all as specified and directed.

All as per Item No 282.00 here-in-above but DG set capacity 76/62.5 KVA complete all as specified and directed.

All as per Item No 282.00 here-in-above but DG set capacity 50/15 KVA complete all as specified and directed.

Supply only K oil super(engine oil) 15 W 40 suitable for kirloskar DG Set complete all as specified and directed.

Supply only K cool Super plus 50-50 premix (coolant) cat part no.82.020.35.1.25 complete all as specified and directed.

S & F in repair of V belt suitable for DG set 200 KVA complete all as specified and directed.

S & F in repair of V belt suitable for DG set 160 KVA complete all as specified and directed.

S & F in repair of V belt suitable for DG set 75/50/15 KVA complete all as specified and directed.

S & F in repair of Coolant Pipe with the connetors and required parts for DG set upto 200 KVA complete all as specified and directed.

Supply only Valve guide for DG Set 75 KVA complete all as specified and directed.

S & F in repair of Fuel pump injection and calibration for DG Set 200 KVA complete all as specified and directed.

Self and DC alternator servicing including winding as per requirement for DG Set 200/160 KVA complete all as specified and directed.

Self and DC alternator servicing including winding as per requirement for DG Set 75/62.5/50 KVA complete all as specified and directed.

M & L for Turbo repairing for DG set 200 KVA complete all as specified and directed.

All as per Item No 297.00 here-in-above for DG Set of capacity 75/50 KVA complete all as specified and directed.

Supply only Radiator hose set with clamp complete set for 50 KVA to 160 KVA 3 phase 50 Hz DG Set of various capacity dismantled/fixed under Sch 'A item above complete all as specified and directed. Note: (i) Fixing element of these items is included under the rates quoted by the contractor above. (ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.

All as per Item No 299.00 but supply only Radiator hose set with clamp complete set for 200 KVA 3 phase 50 Hz DG Set complete all as specified and directed.

All as per item No 299.00 but supply only Water pump assembly complete set for 50/62.5/75 KVA 3 phase 50 Hz DG set

All as per item No 299.00 but supply only Water pump assembly complete set for 160 KVA DG set 3 phase 50 Hz. Complete

All as per item No 299.00 but supply only Water pump assembly complete set for 200KVA DG set 3 phase 50 Hz. complete.

M & L for Cleaning of MS fuel tank of DG sets of capacity upto 400 ltr capacity by collecting the fuel in cleaned barrels and removing sludge deposited/accumulated inside the tank of and disposal of sludge at a distance not exceeding 100 metre and cleaning the tank with kerosene oil , replacement of fuel tank strainer and unserviceable fuel gauge with new PVC fuel level indicator fixed with clips to the tank and marking levels for every 10 litre by marking and numbering on the side of fuel tank with synthetic enameled paint and refilling the collected fuel after filtration complete all as specified and directed.

M & L for repalcement of Door Hinges for DG Set 50 to 200 KVA complete incl welding/bracing complete all as specified and directed.

Supply only Servo motor 10 Kg cm capacity for various capacity of Servo controlled Voltage Stabilizer dismantled/fixed under Sch A above complete all as specified and directed. Note: (i) Fixing element of these items is included under the rates quoted by the contractor above. (ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.

All as per item No 307.00 but supply only Complete control wiring for each phase.

All as per item No 307.00 but RC Net Work 10 Kg-cm (Resistor- Capacitor network)

All as per item No 307.00 but Electronic PCB Control Card (Sensing Card)

All as per item No 307.00 but BTR- 36

All as per item No 307.00 but Indicator lamp pilot type (RYB)

All as per item No 307.00 but Volt meter 0- 300 volts

All as per item No 307.00 but Six Pin connector

All as per item No 307.00 but Carbon brush suitable for 25KVA to 75 KVA stabilizer

All as per item No 307.00 but Complete Armour

All as per item No 307.00 but Terminal Stud

All as per item No 307.00 but Micro Switch

All as per item No 307.00 but Lever

All as per item No 307.00 but VARIAC Coil 100 KVA/ 150 KVA capacity per phase

All as per item No 307.00 but Small Carbon bush for stablizer

All as per item No 307.00 but RC Net work for Servo Stablizer

All as per item No 307.00 but Transformer oil EHV confirming to IS-335 of 1983 of mineral oil grade 'B' having a high dielectric strength not less than 40 KV .

All as per item No 307.00 but Push button/ output adjustable switch for increase/decrease of voltage

S & F in replacement of MCCB Triple Pole upto 100 Amp 415 Volt rupturing capacity not less than 25 KA complete all as specified and directed.

S & F MCCB 4 pole, 415 V, adjustable type 160 Amp with braking capacity 35KA complete all as specified and directed.

S & F in replacement of MCCB 3 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed.

S & F in replacement of MCCB Triple Pole 200 Amp 415 Volt rupturing capacity not less than 35 KA complete all as specified and directed.

S & F in replacement of MCCB 4 Pole 250 Amp 415 Volt rupturing capacity not less than 35 KA complete all as specified and directed.

S & F in replacement of MCCB 3 Pole 400 Amp 415 Volt rupturing capacity not less than 36 KA complete all as specified and directed.

Supply only Electronic timer on Volts/ delay type, 24 dual range, suitable of 220 Volts, 2NO+2NC, 50 Hz, AC AMF supply/ panel DC supply, for 0-60 seconds. for of DG set, dismantled/fixed specified under Sch A above item complete all as and directed. Note :- (i) Fixing element of these items is contractor under the rates quoted by the for Schedule 'A' item No 27 here in above. (ii) Contractor shall have no claim on account item of variation of quantities of any or non execution of any item.

All as per item No 333.00 but supply Power contactor 2NC 4 pole with 2NO + auxiliary contacts, coil voltage 220 volts, AC 3 rating 265/325/330 Amps complete all as specified and directed

All as per item No 333.00 but supply only Power contactor 3 pole with 2NO + 2NC auxiliary contacts, coil voltage 220 volts, AC 3 rating 400 Amps. Complete all as specified and directed

All as per item No 333.00 but supply only Power Contactor No volt coil suitable upto 400Amp Contactor

All as per item No 333.00 but supply only Power Contactor No volt coil suitable for 300/325/330 Amp Contactor

All as per item No 333.00 but supply only Engine starting relay with sequence timer & Master timer suitable for 12 / 24 Volts DC supply.

All as per item No 333.00 but supply only Indicating lamps LED type with holder for 12 / 24 volts DC supply

All as per item No 333.00 but supply only Digital electronic volt meter 0-500 V any capacity size replace with OEM suitable for 12 / 24 volt DC supply

All as per item No 333.00 but supply only Digital electronic amp meter range suitable for 415 Volts panel flush any type with OEM

M & L for replacement of battery lead set of two, suitable upto 180AH capacity 1.5mtr long incuding GM Terminals one end, copper lugs other end complete all as specefied and directed.

Taking down old unserviceable AVR unit from DG set of various capacity and Supply, installation, testing and commissioning in replcement of AVR unit suitable for 3 phase 50 Hz alternator of capacity upto 200 KVA DG set completer all as specified and directed.

S & F in replacement of digital/ analog Control assembly with connector for DG Set capacity from 15 KVA to 200 KVA with necessary modification to controll wiring, replacement of controll relays , programming with all the parameters for safety protection and running suitable for the existing DG sets complete all as specified and directed.

Supply and fixing in replacement of PCB assembly for DG Set capacity 75 KVA to 125 KVA with necessary modification to controll wiring, replacement of controll relays , programming with all the parameters for safety protection and running suitable for the existing DG sets complete all as specified and directed.

S & F in replacement of Battery 12 volt 120-150AH for DG set Upto 200 KVA, Ampere Hour as per OEM complete all as specified and directed.

Taking down old/unserviceable voltage monitoring relay and its adaptor/mounting of any capacity and supply and fix in repair voltage monitoring relay UV/OV/single phase/reverse phase protection new relay of suitable capacity in AMF panel of capacity upto 200 KVA complete all as specified and directed.

S & F integrated LED pilot lamp type of voltage AC/DC to be specified suitable for operating at 110 and 240 volt complete all as specified and directed.

Taking down old unserviceable voltage surge protector relay from existing AMF panel of capacity upto 200 KVA DG set and supply and fix new voltage surge protection relay complete all as specified and diected.

Taking down old unserviceable single phase preventer of any make and capacity and supply and fix in replacement single pahaase prevventer complete all as specified and directed.

Taking down old unserviceable bty charger from existing AMF panel of capacity upto 200 KVA DG set and supply and fix new suitable battery charger as per OEM, check all the conection rectify/ fix complete all as specified and directed.

Taking out old unserviceable strip/wire any type from wall/roof complete all as specified and directed.

S & F aluminium strip of size 25x3.15 mm for Earth continuity conductor or main earthing lead fixed to wall/ roof with saddles and fixing screws etc. for roof conductors and down conductors above ground or any other indicated situation complete all as specified and directed. Note:Two lengths of strips shall be jointed together by overlapping not less than 100 mm both ends through welding/brazing.

S & F copper strip of size 20x3.15 mm for Earth continuity conductor or main earthing lead fixed wall/ roof with saddles and fixing screws etc. for roof conductors and down conductors above ground or any other indicated situation complete all as specified and directed. Note: Two lengths of strips shall be jointed together by overlapping not less than 100 mm both ends through welding/brazing.

S & F GI strip of size 32x6 mm for Earth continuity conductor or main earthing lead fixed wall with saddles and fixing screws etc. or laid underground as in grid connection of earthing complete all as specified and directed. Note: Two lengths of strips shall be jointed together by overlapping not less than 100 mm both ends through welding/brazing.

Taking down old unserviceable single pointed termination rod any type over the roof from PCC block/GI pipe complete all as specified and directed.

S & F single pointed termination aluminium rod 12 mm dia, 300 long on roof top including fixing/fitting of termination rod and over the roof in PCC block/GI pipe and making connection with roof/down conductor with Al strip by proper bolting/ brazing etc complete all as specified and directed. Note: PCC and GI pipe shall be measured and paid separately under respective item of sch.

S & F single pointed termination copper rod 12 mm dia, 300 long on roof top including fixing/fitting of termination rod and over the roof in PCC block/GI pipe and making connection with roof/down conductor with copper strip by proper bolting/brazing etc complete all as specified and directed. Note: PCC and GI pipe shall be measured and paid separately under respective item of sch.

Taking down existing aluminium/copper strip of LA system from roof/wall cleaning, straighting and re-fixing on new insulator complete with fixing arrangements complete all as specified and directed.

Conducting periodical testing of earth pits by standred earth tester after disconnecting earth strip & submitting the records including reconnection complete all as specified and directed. Note: (1) Rs.10000 penlty for per month if contractor fail to submit the record duly signed by the concerned users in time for every month in 1st week.

S & F in replacement of the heavy duty earth pit chamber of 5000 kg load bearing capacity to ensure the safety of the earthing system complete all as specified and directed.

S & F in replacement of high quality copper bolts with nuts, washer to replace and repair existing earthing bolts of suitable length complete all as specified and directed.

M & L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex.head screw complete all as specified and directed.

Supply and fix in replacment and testing of automatic street light timer (digital/analog) of any type including checking all connection and make street light timer functional complete all as specified and directed.

Supply and fix in replacement contactor of suitable capacity of automatic street light timer including cheking all connection and make street light timer functional complete all as specified and directed.

S & F 415 volt AC digital AMP meter complete all as specified and directed.

S & F 415 volt AC digital Volt meter complete all as specified and directed.

S & F LED Flood Light fitting 120/150 Watt made out of pressure dia aluminium hosing with heat resistant toughened glass and IP-66 protection complete all as specified and directed.

S & F in repair/replacement LED Flood Light fitting 30 W made out of pressure dia aluminium hosing with heat resistant toughened glass and IP-65 protection complete all as specified and directed.

Taking down old unserviceable street light fitting of any make and capacity Supply and fixing in repair LED street light fitting 35/40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Taking down old unserviceable driver from street light of any capacity and supply and fixing in repair driver, 240 Volts, 50 Hz suitable for street lights upto 70 watt capacity, complete fixing, testing complete all as specified and directed.

S & F in repair/replacement 10 Watt garden light with pressure die cast powder coated housing with PC diffuser, efficient high out put LED with IP 66 protection complete all as specified and directed. Make: Crompton Cat Part No LABLA1-10-CDL or equivalent in Philips, Havells, Orinet, Philips

S & F PVC round sheathed multicore copper cable of size 1.5 Sqmm 3 core for working voltage upto and including 1100 volts complete all as specified and directed.

Taking down old unserviceable LED panel from street light of any capacity and supply and fixing in repair led panel of suitable capacity, complete fixing, testing all as specified and dorected.

S & F FRP junction box (weather proof) of size 250 x 250 x 160mm including three phase four nos busbarstrip of 150x30x30mm alongwith suitable clamps including MCB SP 6 Amps 10 KA rating,fixing with flat iron clamps, nuts and bolts complete all as specified and directed.

S & F in repair/replacement integral pole mounted decorative pressure die cast aluminium housing with specially designed optics for providing uniform light distribution for outdoor enhance LED post top light 35 Watt with IP66 protection including all fittings suitable for 80 mm Gi pipe complete all as specified and directed.

Taking down old burnt/unserviceable PCB/PLB card from voltage stabilizer upto capacity 250 KVA and supply,fix, testing and commission new PCB/PLB compitable as existing complete all as specified and directed.

M & L for painting and numbering of electric poles including street light brackets,from outside with two coats of aluminium duco paint after cleaning and preparing the surface of poles of any size complete all specified and directed.

M&L street light bracket made out from GI Pipe 32 mm, light grade, 1 m long bent to shape including fixing clamp made out from MS Flats of size 25x5 mm complete with nuts and bolts and washers of suitable size duly painted with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed .

Supply and install flame proof manual call point complete all as specified and directed.

Supply and install fire alarm sounder/siren electronic type horizontal single stage continuous normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 mtr with sound output variation of +5 db 500 mtrs range complete all as specified and directed.

Detectors Complying with and type certified to EN - 45 Addressable type smoke detector Photoelectric /Optical with base with self built intelligence as per IS: 11360

All as per Item No 392.00 here-in-above but Addressable type multisensor detector with heat and smoke combination complete all as specified and directed.

S & F electronic meters single phase/ three phase temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed.

S & F electronic 3 phase meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed.

Neev Enterprises (BID ID -3489327)

NAVEEN ENGINEERS AND CONSULTANTS (BID ID -3489442)