PROVN OF Y SHAPED ANGLE IRON WITH CONCERTINA COIL AND BARBED WIRE OVER SECURITY WALL AT KLP LOC FOR FD REGT AND MODIFICATION OF 08 TOILETS AT HQ CEUZ AND ROOF TREATMENT AND WINDOWS OF BLDG NO P 32 4 AT SAPPER ENCLAVE AND IMPROVEMENT OF SANITARY FITTI

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding not backing and removing rubbish off the premises complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc complete all as specified and as directed.

Joint free non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge/ GE.

Glazed ceramic coloured tiles 600X 300X 10 mm thick as in skirting / dados set and jointed in neat cement slurry and pinted in white or coloured cement to match over 10 mm back coat in CM 1:3 complete all as specified and as directed.

Granite slab 20 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges.

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sqm each

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Factory made solid panel PVC moulded door shutter, 28 to 30 mm thick(styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

12mm Toughned glass (tinted glass one side view) as in windows, partitions automatic doors and similar work including cutting to shape, drilling holes required complete fixed with necessary cleats complete all as specified and as directed.

Pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.50 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and as directed.

Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Powder coated anodised sliding/hung type aluminium door/windows shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

Powder coatedAnodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge/GE.

18/19 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber/aluminium frame work as in cabinets all as specified and directed

Providing and fixing flase ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm x 6mm thick of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS 8225 : 1987, non combustible as per BS 475 (Part 4)-1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120 grams per sqm both sides) comprising of main T runners of size 15 x 32 mm of length 3000 mm, cross T of size 15 x 32mm of length 600 mm x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50 mm long, 8 mm outer diameter M-6 dast fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specificatins, drawing and as per directions of Engr-in-Charge/GE.

Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and as directed by Engr-in-charge/GE.

Old size brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Plain cement concrete type D2 1:4:8 (using 40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified.

15mm thick rendering into two layers consisting 10mm thick in CM 1:4 followed by 5mm thick in CM 1:4 on fair faces of brick work or concrete surface including finished even and fair without using extra cement complete all as specified and as directed by Engr-in-charge/GE.

Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortor 1:3 finished even and smooth without using extra cement, complete as as specified and as directed by Engr-in-charge/GE.

Precast cement concrete 1:2:4 type B-I using 20 mm graded stone aggregate as in cover slabs, (for man holes) chullah hoods, chajjas, shelves and similar articles with plain faces and set in mortar 1:6 complete all as specified and as directed.

TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in coping and benching including necessary form work etc. complete all as specified and as directed.

Preparation new ceiling surfaces plastered or unplastered and applying three coats of white wash on ceiling complete all as specified and as directed.

Taking down cement plaster from brick/ concrete etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge/GE.

Demolition of reinforced/ unreinforced cement concrete in roof floor (other than ground floors) beams staircase, shelf landing chajja etc and similar work complete all as specified and as directed.

Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, benching kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and as directed.

Cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and rendering 15mm thick plaster over the surface of roof, all as specified and as directed by the Engineer-in-Charge/GE.

Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application over one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm and applying one coat of Bitumenous aluminium pait over APP Memberence complete all as specified and as directed by the Engineer-in-Charge. Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil/strata for foundation, etc, or for shafts, wells, drain pipes and getting out complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing surplus spoil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar internal dia of pipe 200 mm inforced complete all as specified and as directed.

Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate for 150 mm bore pipes complete all as specified and as directed.

Salt glazed stoneware drain pipes, 150 mm dia, laid in trenches and jointed complete all as specified and as directed.

Cutting into existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Concertina coil 600 mm dia, 56 loops, 2.5 mm core wire, heavy galvanised (wire 275 GSM & Strip 200 GSM) , tensile strength of wire 1400 - 1500 N/Sqmm, weight 6-8 Kg/coil, stretchable length 6m to 8 m including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc

Walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted, built in cement mortar (1:6) including providing weep holes complete all as specified and as directed. (PCC bond stone shall be measured and paid seperately)

All as per Ser Item No 48 above but except stones complete all as specified and as directed.

PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in bond stones of any thickness and size or shape, except block or slab set in CM 1:6 complete all as specified and directed

Raised pointing to random rubble walling uncoursed in CM (1:3) complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought up to course, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20 mm for granite or trap stone complete all as specified and as directed.

PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete all as specified and as directed.

Flush pointing to random or polygonal rubble, masonry in cement mortar 1:4 complete all as specified and as directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stop ends etc complete all as speicified and directed by Engr-in-Charge/GE.

Preparation of old decorated wall surfaces by washing rubbing down and stopping of distempered surfaces and filling the nail holes by white cement and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed by Engr-in-charge/GE.

Preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed by Engr-in-charge/GE.

Preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-charge.

Preparation of old decorated surfaces of walls by by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applying one coat of cement based paint white or tinted complete all as specified and as directed by Engr-in-charge/GE.

Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge.

Supply only water proofing compound (liquid),ISI marked complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

Supply and fix in 100 mm long aluminium anodised tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge/GE.

Supply and fix in door handle, 100 mm size, aluminium anodised, complete all as specified and as directed by Engr-in-charge/GE.

Supply and fix in 300mm long aluminium anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge/GE.

Supply and fix 5.5mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and as directed.

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Taking up down steel water tubing and connection incl cleaning for refixing or removal to stores for bore in pipe 15 mm complete all as specifed and directed.

Taking up down steel water tubing and connection incl cleaning for refixing or removal to stores for bore in pipe 20 mm complete all as specifed and directed.

Steel water tubing medium grade GI with all fitting and fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 15mm complete all as specified and directed.

Steel water tubing medium grade GI with all fitting and fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 20mm complete all as specified and as directed.

Supply and fixing "as in repair" stop valves/angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge/GE. Make : Cat No LYR-38053 or equivalent in Jaquar, Parryware.

Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed. Make : Cat No ARI-39037 or equivalent in Jaquar, Parryware.

Supply and fix in repairs two way Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed.Make : Cat No ARI-39041 or equivalent in Jaquar, Parryware.

S&F as in repairs fancy type single lever basin mixer Pillar tap, cast copper alloy, with capstan heads, chromiuk plated, screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm complete all as specified and directed Make : Cat No ARI-39001B or equivalent in Jaquar, Parryware.

Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge/GE.

S & F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

Vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified and as directed.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC).

S & F in repairs PVC connection 15 mm size with PTMT (Make-Prayag) Nuts of length 450 mm complete all as specified and directed

PVC waste pipe for WHB/Sink 32 mm/ 40 mm bore with one end with socket complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches or in floor complete all as specified and as directed.

All as per item No 86 above above but 75 mm bore pipe complete all as specified and as directed.

110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , fixed to wall complete all as specified and as directed.

All as per item No 88 above but 75 mm bore pipe complete all as specified and as directed.

110 mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed.

All as per item No 90 above but 75 mm complete all as specified and as directed.

110 mm bore PVC (SWR) junction single (Single T) with access door any radius complete all as specified and as directed.

All as per item No 92 above but 75 mm complete all as specified and as directed.

S & F 110 mm PVC (SWR) vent cowl complete all as specified and as directed.

Rotational molded (three layered as per IS 12701) white polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litres and dismantling of old UNSV water tank of same capacity all as specified and directed by Engr-in-Charge/GE.

All as per item No 95 above but 500 ltr capacity water storage tanks complete all as specified and as directed.

Supply and fixing "as in repair" ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge/GE.

S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair Waste coupling of PTMT for 32mm dia discharge pipe (half or full threaded) (Minimum weight 32mm 45gms/ 40mm-60 gms) complete all as specified and as directed.

S & F in repair corner glass shelf with brass chromium plate bracket guard and railing all as specified and directed, Make : Cat No BEA-52

S & F in repairs 32mm Brass chromium plated bottle traps for wash basins and urinals with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

32mm dia low density polythylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed to walls including all pipe fittings such as ends, elbows, union, tees, etc concealed complete all as specified and as directed.

10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and directed.

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 100mm complete all as specified and as directed.

100mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cement joints,laid in trenches or in floors complete all as specified and as directed.

75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,laid in trenches or in floors complete all as specified and as directed.

100mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cement joints, fixed to walll complete all as specified and as directed.

75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,fixed to wall complete all as specified and as directed.

50mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,fixed to wall complete all as specified and as directed.

Salt glazed stone ware gully traps square or round mouthed, type P of size 150x150mm set and jointed to drain pipe with cement mortar (1:1) including demolition of old unserviceable gully traps complete all as specified and as directed.

Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 75mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and as directed.

Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 100mm bore fitted with oval access door fixed with rubber rings joints as in repairs complete all as specified and as directed.

75mm Cast iron floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and as directed.(ISI Mark)

Cast iron branch pieces, single/double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 bore, fitted with oval access door as in repairs complete all as specified and as directed.

Cast iron branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore, fitted with oval access door as in repairs complete all as specified and as directed.

S&F 50mm Cast iron cowls complete all as specified and as directed.

Cast iron Reducer 100mm for connecting and fixing gas pipe on walls as in repairs complete all as specified and as directed.

Cast iron Reducer 75 mm for connecting and fixing gas pipe on walls as in repairs complete all as specified and as directed.

Welded steel wire fabric mesh weight n.exc 4 Kgs per sqm fixed to steel members complete all as specified and directed.

100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Magnetic catches brass body and striking plate including letting in and fixed suitable for cupboard shutters complete all as specified and as directed.

150mm reinforced contrete pipes class NP-3, drain pipes laid in trenches and jointed all as specified and as directed.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repairs drapery rod of 25mm dia stainless steel decorative along with brackets and end caps of quality as approved by GE.

S &F in repair sheet glass shelf assembly 500 x 125 mm consisting of 5.5 mm thick sheet glass shelf with chromium plate bracket guard and railing 60 cm long complete all as specified and as directed. Cat No BEA-47 or equivalent in Jaquar, Parryware

S&F in repair CP tubular towel rail , 600mm long between flanges aluminium anodised, fixed with rawl plugs complete all as specified and directed. Make : Cat No CAN-1111NM or equivalent in Jaquar, Parryware

Supply and fix in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge/GE.

CP towel rack 600 mm long with lower hangers all as specified and directed, Make : Cat No ACN-1181N, or equivalent in Jaquar, Parryware

S&F in repairs one unit EWC complete with all accessories including flusing cistern all as specified and directed. Make : Cat Part No ZPS-WHT-1028 or equivalent in Jaquar, Parryware.

S & F in repairs CP health faucet with 8mm dia 1.00m long flexible tube and wall hook with all accessories all as aproved complete all as specified and as directed. Make : Cat No ALD-CHR-579 or equivalent in Jaquar, Parryware.

S&F in repairs CP Soap dish complete all as specified and as directed.

Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as directed.Keeping the LED lights in safe custody.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

All as per srl item No 135 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 135 but for 3 Pin 16 Amps socket outlet independent board with cable 4.0 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

Modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge/GE.

Modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge/GE.

Modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge/GE.

Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge/GE

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge/GE.

Supply and fixing in replacement LED lights fitting 1x 20W, 230V,AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge/GE.

Supply and fixing in replacement LED lights fitting 1x 10W, 230V,AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge/GE.

S&F in replacement Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.(Note-MCBs will be measured separately).

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection all as specified and direceted by Engr-in-charge/GE.

Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 4 core size all as specified. Note : Earth work and other connected work shall be measured & paid sperately.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

M/S SHREE RAM DUBEY AND SONS (BID ID -3127346)

khajuria builders (BID ID -3104536)