REPAIR, POLISHING AND PAINTING TO STEEL FURNITURE , WOODEN FURNITURE AND RECANING OF CHAIRS AT AF STN NAL

Amount

Removing old unserviceable Top of Table Dining 6 persons and S&F new Top made of prelaminated particle board of existing size, shape and polishing all exposed wooden surfaces of table with 1 coats of French Polish complete all as specified and shown on drg and directed. Refer drawing No. FD-273

Removing old unserviceable Leg of table dining 6 persons and S&F new leg of shisham wood and properly tightening of frame complete all as specified and directed. Refer drawing No. FD-273. Note: PVC rings will measured separately

All as per item No 2.00 here-in-before but for Top rail long.

All as per item No 2.00 here-in-before but for Top rail small.

M&L French polish, 2 coats to new parts of table dinning 6 persons replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-273

Removing old unserviceable top of Table 900mmx600mm with / without drawer steel and S&F new Top made of prelaminated particle board of existing size & shape and edges covered with 4mm thick teak wood beading complete all as shown on drawing, specified and directed. Refer drawing No. FD-1008, FD-1007

Removing old unserviceable Leg of Table 900mmx600mm with / without drawer and S&F new Leg without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-283, 284

All as per item No 7.00 here-in-before but for Top rail long.

All as per item No 7.00 here-in-before but for Top rail small.

All as per item No 7.00 here-in-before but for Drawer.

All as per item No 7.00 here-in-before but for Stiffner.

M&L French polish, 2 coats to new parts of table 900x600mm with/without drawers replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-283, 284

Removing old unserviceable top of Peg Table and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-277

Removing old unserviceable Leg of Peg Table and S&F new leg without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-277

All as per item No 14.00 here-in-before but for top rail long .

All as per item No 14.00 here-in-before but for top rail small.

M&L French polish, 2 coats to new parts of peg table replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-277

Removing old unserviceable top of Table Writing and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-275

Removing old unserviceable Leg of Table writing and S&F new leg without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-275

All as per item No 19.00 here-in-before but for Top rail long.

All as per item No 19.00 here-in-before but for Top rail small.

All as per item No 19.00 here-in-before but for Drawer.

All as per item No 19.00 here-in-before but for Stiffner Long.

All as per item No 19.00 here-in-before but for Stiffner small.

All as per item No 19.00 here-in-before but for Door panel.

M&L French polish, 2 coats to new parts of table writing replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-275

Removing old unserviceable Drawer of Table Dressing Ladies and S&F new Drawer complete as per drg of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-251

Removing old unserviceable Looking mirror of Table Dressing Ladies and S&F new Looking mirror complete with frame and back rails complete made of teak wood duly fixed with clamp for hanging of table dressing ladies complete all as specified and shown on drg and directed. Make of mirrror: Modi/swastik/Atul of existing size, shape.Refer drawing No. FD-251

Removing old unserviceable Sliding glass of Table Dressing Ladies and S&F new Sliding glass 5 mm thick with aluminium E channel of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-251

M&L French polish, 2 coats to new parts of table dressing ladies replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-251

Removing old unserviceable Drawer of Table Dressing Gents and S&F new Drawer complete as per drg of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-230

Removing old unserviceable Looking mirror of Table Dressing Gents and S&F new Looking mirror complete with frame teak wood duly fixed with clamp for hanging of table dressing gents complete all as specified and shown on drg and directed. Refer drawing No. FD-230

M&L French polish, 2 coats to new parts of table dressing gents replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-230

Removing old unserviceable Top of Table Centre/Table centre 2 tier and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-235, 274

Removing old unserviceable Leg of Table centre/Table centre 2 tier and S&F new Leg without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-235, 274

All as per item No 35.00 here-in-before but for Top rail long.

All as per item No 35.00 here-in-before but for Top rail small.

M&L French polish, 2 coats to new parts of table centre replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-235, 274

Removing old unserviceable Top of Table Bed Side and S&F new Top made of 19mm thick prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-276

All as per item No 39.00 here-in-before but for Sides.

All as per item No 39.00 here-in-before but for Shelf.

Removing old unserviceable Back Ply of Table Bed Side and S&F new Back Ply 6 mm thick of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-276

M&L French polish, 2 coats to new parts of table bed side replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-276

Removing old unserviceable Plywood of Bed Hard and S&F new Plywood 12 mm thick of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-246, 247

Removing old unserviceable Head board of Bed Hard and S&F new Head board complete of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-246, 247

Removing old unserviceable Foot board of Bed Hard and S&F new Foot board complete of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-246, 247

Removing old unserviceable Long rail of Bed Hard and S&F new Long rail made of teak wood of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-246, 247

Removing old unserviceable Support rail of Bed Hard and S&F new Support rail made of 2nd class hard wood of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-246, 247

Removing old unserviceable MS bracket of Bed Hard and S&F new MS bracket 150x35x5mm thick Flat iron "L"shape duly treated with black japan paint. of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-246, 247

M&L French polish, 2 coats to new parts of bed hard replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-246, 247

Removing old unserviceable bottom frame of side board and supply and fixing new bottom frame made of Ist class hard wood in legs complete all as shown on drg and as directed. Refer drawing No. FD-241

Removing old unserviceable door panels of side board and supply and fixing door panels (Left and right both) made of 18mm thick prelaminated particle board including lock and knobs complete all as shown in drawing fixed with piano type hinges. All as shown on drawing and as directed. Refer drawing No. FD-241

Removing old unserviceable shelf of side board and supply and fixing new shelf made of 18mm thick commercial plywood complete all as shown in drawing fixed with piano type hinges. All as shown on drawing and as directed. Refer drawing No. FD-241

Removing old unserviceable knob from side board and supply and new metallic knobs as per existing pattern fixed with machine screw complete. All as shown on drg and as directed. Refer drawing No. FD-241

M&L French polish, 2 coats to new parts of side board replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-241

Removing old unserviceable Top of teapoy and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-278

Removing old unserviceable Leg of Teapoy and S&F new Leg of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-278

All as per item No 57.00 here-in-before but for Top rail long.

All as per item No 57.00 here-in-before but for Top rail small.

All as per item No 57.00 here-in-before but for Stiffner.

M&L French polish, 2 coats to new parts of Teapoy replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-278

Removing old unserviceable Leg of chair dining/wooden bottom and S&F new leg of shisham wood and properly tightening of seat frame complete all as specified and directed. Refer drawing No. FD-279 (PVC rings will be measured separately).

All as per item No 62.00 here-in-before but for Rear leg.

All as per item No 62.00 here-in-before but for Side rail with caning holes for seat frame.

All as per item No 62.00 here-in-before but for Front rail with caning holes for seat frame.

All as per item No 62.00 here-in-before but for rear rail with caning holes for seat frame.

All as per item No 62.00 here-in-before but for Stiffner.

M&L French polish, 2 coats to new parts of chair dining / wooden bottom replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-279

Removing old unserviceable leg of chair writing and S&F new leg made of shisham wood and properly tightening of seat frame complete all as specified and directed. Refer drawing No. FD-280 (PVC rings will be measured separately).

All as per item No 69.00 here-in-before but for Rear leg.

All as per item No 69.00 here-in-before but for Side rail with caning holes for seat frame.

All as per item No 69.00 here-in-before but for Front rail with caning holes for seat frame.

All as per item No 69.00 here-in-before but for rear rail with caning holes for seat frame.

All as per item No 69.00 here-in-before but for Stiffner.

All as per item No 69.00 here-in-before but for Arms.

M&L French polish, 2 coats to new parts of chair writing replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-280

Removing old unserviceable PVC rings from chair easy, chair writing, chair dining, table centre, table writing, table dining 6 pers, table 900x600mm, peg tables, teapoy etc and supply and fixing new PVC ring with screw and washer all as shown on drawing and as directed.

Removing old unserviceable leg rear/front of chair easy and S&F new leg made of shisham wood and properly tightening of seat frame Complete all as Specified and directed. Refer drawing No. FD-229 (PVC rings will be measured separately).

All as per item No 78.00 here-in-before but for Side rail of Seat frame/back frame with holes for canning .

All as per item No 78.00 here-in-before but for Front rail of Seat frame/back frame with holes for canning.

All as per item No 78.00 here-in-before but for Rear rail of Seat frame/back frame with holes for canning.

All as per item No 78.00 here-in-before but for Arms.

M&L French polish, 2 coats to new parts of chair easy replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-229

Removing Old unserviceable Cane From Chair dinning and Re-canning with 2mm to 2.5mm wide plastic cane in Godrej pattern and 3.5mm to 4 mm plastic cane for Parameter work Complete all as Specified. Refer drawing No. FD-279

All as per item No.84.00 above but chair writing. Refer drawing No. FD-280

All as per item No.84.00 above but Chair easy (Seat &Back). Refer drawing No. FD-229

Removing old unserviceable Table top of Table Office Officer steel and S&F new Table top made of 18 mm thick Pre-laminated particle board of existing size & shape and edges covered with 4mm thick teak wood beading complete all as shown on drawing, specified and directed. Refer drawing No. FD-84(M), FD-1003

Removing old unserviceable box incl unsv drawers from Table office Officers and supply and fixing new box with 3 drawers made of 20gauge MS sheet with Brass Lock of Make Godrej/Harrison/Link with duplicate keys in 1 drawer, PVC recessed handles with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drawing FD-84(m), 1003 etc and as directed.

Removing old unserviceable table top of Table Office clerk steel and S&F new table top made of 18 mm thick Prelaminated particle board of existing size & shape and edges covered with 4mm thick teak wood beading complete all as shown on drawing, specified and directed. Refer drawing No. FD-84(M), FD-1004

Removing old unserviceable box incl drawers from Table office Clerk Steel and supply and fixing new box with 3 drawers made of 20gauge MS sheet with Brass Lock of Make Godrej/Harrison/Link with duplicate keys in 1 drawer, PVC recessed handles with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drawing FD-84(m), 1004 etc and as directed.

Removing old unserviceable Top of Table 900mmx900mm steel and S&F new Top made of 18mm thick prelaminated particle board of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No.-FD-1009

Removing old unserviceable top of Table 900mmx600mm with/without drawer steel and S&F new Top made of 18mm thick prelaminated particle board of existing size & shape and edges covered with 4mm thick teak wood beading complete all as shown on drawing, specified and directed. Refer drawing No. FD-1008, FD-1007

Removing old unserviceable drawer of Table 900mmx600mm with drawer steel and S&F new drawer complete of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1008, FD-1007

Removing old unserviceable Top from Teapoy Verandah and supply and fix new Top made of 18mm thick prelaminated particle board of existing size & shape and edges covered with 4mm thick teak wood beading complete all as shown on drawing, specified and directed. Refer drawing No. FD-255(M)

Removing old unserviceable Leg of Almirah Medium steel and S&F new Leg made of 1 mm thick MS sheet duly painted with two coats of synthetic enamel paint over one coat of primer of existing size, shape complete all as specified and shown on drg. Refer drawing No. FD-1032

Removing old unserviceable CP Handle of Almirah Medium steel and S&F new CP Handle (Superior Quality) of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1032

Removing old unserviceable Locks of Almirah Medium steel and S&F new Lock brass 65/75mm as required including necessary repair to locking mechanism of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1032

Removing old unserviceable Leg of Almirah Large steel and S&F new Leg made of 1 mm thick MS sheet duly painted with two coats of synthetic enamel paint over one coat of primer of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1031

Removing old unserviceable CP Handle of Almirah Large steel and S&F new CP Handle (Superior Quality) of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1031

Removing old unserviceable Lock of Almirah Large steel and S&F new Lock MS 65/75mm with brass lever as required including necessary repair to locking mechanism of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1031

Removing old unserviceable MS leg of Locker bed side steel and S&F new legs made out of 1.00mm thick MS sheet duly painted with two coat of synthetic enamel paint over one coat primer of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1029

Removing old unserviceable MS hasp and staple of Locker bed side steel and S&F new MS hasp and staple 75 mm long of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1029

S&F as in repairs seat for chair tubular steel with arms made of 2nd class hard wood duly canned with plastic cane 2mm wide with black paint finish fixed with nut, bolts and washer complete all as shown on drawing, specified and directed. Refer drawing No. FD-75 (M)

All as per description item No 103 here-in-before but back for chair tubular steel with arms. Refer drawing No. FD-75 (M).

All as per description item No 103 here-in-before but Arms for chair tubular steel with arms. Refer drawing No. FD-75 (M)

S&F as in repairs 02 Nos of flat for seat of chair CB steel with arm fixing by gas welding size 450mmx20mmx3mm for chair tubular steel with arms complete all as shown on drawing, specified and directed. Refer drawing No. FD-75 (M)

Removing old unserviceable top of Form without back and supply and fix new top of Pre-laminated particle board 25mm thick with 15mm th Teak wood beading alround the top of existing size, shape, pattern complete all as shown on drawing, specified and directed. Refer drawing No. FD-77(M), FD-1027

Removing old unserviceable top of Table computer and supply fixing new top made of 18mm thick prelaminated particle board edges covered with PVC beading all as shown on drg FD/E6/MAP/03 & TP and as directed.

Removing old unserviceable shelf from Table computer and supply fixing new shelf made of 18mm thick prelaminated particle board and edges covered with PVC beading all as shown on drg FD/E6/MAP/03 & TP and as directed.

Removing old unserviceable key board tray from Table computer and supply fixing new key board tray made of 18mm thick prelaminated particle board with telescopic channel SS (Make : Flyrail/Hettich/Haffle) exposed edges covered with PVC beading all as shown on drg FD/E6/MAP/03 & TP and as directed.

Removing old unserviceable Drawer from Table computer and supply fixing new drawer made of prelaminated particle board edges covered with PVC beading fixed with telescopic channel SS (Make : Flyrail/Hettich/Haffle) all as shown on drg FD/E6/MAP/03 & TP and as directed.

Removing old Top from Table Dining ORsr and supply fixing new Top made of 18mm pre laminated particle board and covered with 1mm thick aluminium sheet all as shown on drg FD-165(M) and as directed.

Removing old unserviceable Hard PVC shoe of Table Office Officer steel / table officer clerk steel / table 900x900 steel / table 900x600 steel / form with or without back and S&F new Hard PVC shoe superior quality of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-84(M), FD-1003

Removing old unserviceable cane from Chair Verandah and M&L re-canning seat & back of chair verandah with 1st class plastice cane 4.0 to 5.0 mm wide white colour and applying one coat of synthetic enamel paint white to complete chair before re-canning complete all as specified and directed. Refer drawing No. Refer drawing No. FD-359

M&L PVC shoe (best quality) white for chair verandah complete all as specified and shown on drg.Ref FD-359

S&F in repairs ABS seat with moulded PU Foam and tapestry cloth of chair visitor of make Godrej / Easy / Delite / Hitech of existing size, shape, pattern complete all as specified and directed.

S&F in repairs ABS back with moulded PU Foam and tapestry cloth of chair visitor of make Godrej / Easy / Delite / Hitech of existing size, shape, pattern complete all as specified and directed.

S&F in repairs PU arms of chair visitor of make Godrej / Easy / Delite / Hitech of existing size, shape, pattern complete all as specified and directed.

M&L preparation of old painted surface by scraping, denting, derusting etc and applying one coat of synthetic enamel paint (OG/Dove Grey/AF Blue) by spray painting to Almirah large steel complete internal and external including top and bottom as directed.Refer drawing No. FD-1031

All as per description of item No. 119 here-in-before but Almirah large steel complete external only including top and bottom. Refer drawing No. FD-1031

All as per description of item No. 119 here-in-before but Almirah medium steel complete internal and external including top and bottom. Refer drawing No. FD-1032

All as per description of item No. 119 here-in-before but Almirah medium steel complete external only including top and bottom. Refer drawing No. FD-1032

All as per description of item No. 119 here-in-before but Locker bed side steel complete internal and external including top and bottom. Refer drawing No. FD-1029

All as per description of item No. 119 here-in-before but Locker bed side steel complete external only including top and bottom. Refer drawing No. FD-1029

All as per description of item No. 119 here-in-before for Table office officer steel complete internal and external . Refer drawing No. FD-1003, FD-84(M)

All as per description of item No. 119 here-in-before but Table office clerk steel complete internal and external . Refer drawing No. FD-84(M), FD-1004

All as per description of item No. 119 here-in-before but Side rack 3/4 space steel complete including Top & Bottom of each space. Refer drawing No. FD-1023

All as per description of item No. 119 here-in-before but Stool steel. Refer drawing No. FD-81(M)

All as per description of item No. 119 here-in-before but Form without back. Refer drawing No. FD-77(M), FD-1027

All as per description of item No. 119 here-in-before but Chair CBA Steel. Refer drawing No. FD-75(M)

All as per description of item No. 119 here-in-before but Table dining Ors. Refer drawing No. FD-165(M)

All as per description of item No. 119 here-in-before but Teapoy verandah. Refer drawing No. FD-255

All as per description of item No. 119 here-in-before but Book shelf large complete including Top & Bottom of each tier. Refer drawing No. FD-69(M)

All as per description of item No. 119 here-in-before but Table 900x900 steel .Refer drawing No. FD-1009

All as per description of item No. 119 here-in-before but Table 900x600 steel with drawer. Refer drawing No. FD-1008

All as per description of item No. 119 here-in-before but Table 900x600 steel without drawer. Refer drawing No. FD-1007

All as per description of item No. 119 here-in-before but Bed Hard. Refer drawing No. FD-E6/MAP/08(R)

All as per description of item No. 119 here-in-before but chair lounge 3 seater.

All as per description of item No. 119 here-in-before but Book shelf small steel / rack steel 3 tier complete including Top & Bottom of each tier. Refer drawing No. FD-69(M)

All as per description of item No. 119 here-in-before but rack adj type open/rack steel 1905x915x375mm / rack open large 6 tier steel. Refer drawing No. FD-1038, FD-129

All as per description of item No. 119 here-in-before but chair school with hand board. Refer drawing No. FD-1038, FD-129

All as per description of item No. 119 here-in-before but rack shoe steel. Refer drawing No. FD-E6/MAP/02/(R)

PRAFUL ENTERPRISES