REPAIRS AND CLEANING OF SEWAGE LINES MANHOLES SEPTIC TANK PATHWAY DRAIN AND OTHER MISCELLENEOUS BR WORKS AT TB II SCCSR 134 I WKSP EME AND DUNKIRK LINE UNDER AGE BR P IN GE CENTRAL KIRKEE.

Amount

Cleaning of existing septic tank of 500 users capacity by using mechanical pumping machine to removing water, sludge, stones, solid particles etc complete from the septic tank at any location and at any distance from road and removing the same from the campus and buried complete all as specified and as directed as below :- (i) The sludge / burried soil taken out shall be stacked along with the septic tank, sump well etc., after 48 hours of the sludge taken out, measurement shall be taken as of the solid contents for the purpose of payment. The tenderer are advised to keep this aspect in mind while quoting the rates. After taking the measurements, the solid contents shall be disposed off outside the Md land/area. (ii) Necessary precautions as well as safety measures shall be taken by the contractor without any extra cost, for working in the foul conditions. (iii) The contractor shall be entirely responsible for the lapse, mishappening to any of the manpower deployed and/or to other equipment / machinary / material at the site of work during the execution. (iv) For cleaning the sewere line/manholes also refer relevant clauses of particular specifications here-in-after.

All as per Sl Item No. 1 above but septic tank for 200 users.

All as specified in item No 1 above but filter bed for 500 users.

Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation etc or for manholes, laying pipes etc and getting out in hard / dense soil complete all as specified and as directed.

Excavating in trenches exc. 1.5 m depth and n. exc. 3.0 m in depth; for sewage line foundation etc or for manholes, laying pipes etc and getting out in any type of soil complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware / AC / RCC) drain pipes of 150mm dia set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware / AC / RCC) drain pipes of 200mm dia set in cement mortar complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings n. exc. 15cm thickness in any position complete all as specified and as directed.

Demolition of precast concrete block walling built in cement mortar as in manhole including PCC copings complete all as specified and as directed.

Material and labour for plain cement concrete (1:4:8), type D2 using 40 mm graded coarse stone aggregate as in bed to drain pipes of 150 mm bore including forming cradles complete all as specified and as directed.

Material and labour for plain cement concrete (1:4:8), type D2 using 40 mm graded coarse stone aggregate as in bed to drain pipes of 200 mm bore including forming cradles complete all as specified and as directed.

Material and labour for plain cement concrete (1:4:8), type D2, using 40 mm graded coarse stone aggregate in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for Reinforced cement concrete pipes 150mm bore, class NP2, laid in trenches and jointed complete with collars complete all as specified and as directed.

Material and labour for Reinforced cement concrete pipes 200mm bore, class NP2, laid in trenches and jointed complete with collars complete all as specified and as directed.

Material and labour for Reinforced cement concrete pipes 300mm bore, class NP2, laid in trenches and jointed complete with collars including demolition and breaking up drain pipes (salt glazed ware AC/RCC) drain pipes set in cement mortar complete all as specified and as directed.

Material and labour for precast cement concrete block massonry with solid block exceeding 10cm in width and setting in CM (1:6) precast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate complete all as specified and as directed.

All as per Sl Item No. 16 above but except blocks.

Material and labour for plain cement concrete, (1:3:6), type C1, using 20 mm graded coarse stone aggregate as in coping including necessary formwork complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar (1:4) on concrete block masonry surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and as directed. NOTE:- Waterproofing compound will be measured and paid separately.

Supply only integral liquid water proofing compound of make :- Dr Fixit LW plus or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Returning, filling in hard / dense soil spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and as directed.

Removing excavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed.

Material and labour for precast cement concrete (1:2:4) type B1, using 20 mm graded coarse stone aggregate as in cover slabs set in CM (1:6) including demolition of existing complete all as specified and as directed.

Material and labour for TMT steel bars 8 mm dia, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

All as per Sl Item No. 24 above but 6mm dia TMT bars.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

All as per Sl Item No. 26 above but for 57 cm inner girth of drain/ channel.

All as per Sl Item No. 26 above but for 74 cm inner girth of drain/ channel.

Material and labour for cleaning of all types of blockages of sewerage in any type of sewerage line, branch line, main sewer line, etc of any section and in any situation by way of cleaning / desludging sewage from blocked manholes by using mechanical pumping out or any other suitable means. where required and directed by Engineer-in-charge and keeping sewer line functional by attending day-to-day complaints of chocked up manholes, sewage lines etc., cleaning the trap, WC, soil waste, vent pipe, gully traps, upto final drop outlet, inlet of septic tank working in foul conditions with taking precautionary measures, equipments and required power/cable pertaining to TB-II OTM Accn and MD Accn complete all as specified and as directed. NOTE :- (i) Complaints of blockages and cleaning of sewage line are to be received daily from the complaint cell situated in the premises of office of the AGE B/R (P) Kirkee and entire complaints are to be attended for cleaning on the same day. Contd..30

Contd,, from 30 Minimum number of labourers with specialised experience will not be less than 04 Nos safaiwals from 0830 hrs to 1700hrs. (ii) The payment towards the subject items shall only be made as per the total number of days, contractor had cleaned and cleared the blockages of sewage line. (iii) In case urgent nature of complaints, contractor has to attend the complaints even on Sundays and holiday also (iv) Contractor shall maintain a register including details of day of cleaning of sewage line, duly signed by contractor and Engineer-in-Charge. (v) If the contractor will not able to provide the man power, the recovery of Rs. 650/- per person pe day will be deducted.

Material and labour for plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom,and cover with mild steel chromimium plated or aluminised hinging device complete fixed in repairs all as specified and directed.

Material and labour for vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per CERA Cat No CURTIS or techno commercially equivalent makes specified in PS fixed as in repairs, complete all as specified and as directed.

Material and labour for vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and directed.

Supply and fix in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings I.e float valve, syphon, flush pipe,brackets complete Make - M/s Hindustan Sanitary Ware, Parryware, Commander, CERA, M/S Johnson Peddar

Material and labour for vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040109 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and directed.

Supply and fix in repairs PVC (SWR) bends, type 'B' (any radius ), deminishing pieces or tapers, bore of pipe 75mm dia, complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) bends, type 'B' (any radius ), deminishing pieces or tapers, bore of pipe 110mm dia, complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) branch piece, double (double Y ) equal or unequal of pipe 75mm bore type 'B' complete all as spcified and as directed.

Supply and fix in repair PVC (SWR) branch piece, double (double Y ) equal or unequal of pipe 110mm bore, type 'B' complete all as spcified and as directed.

Supply and fix in repair PVC (SWR) pipes, type 'B' single socketed, in any length, with rubber ring joints 75mm dia, type 'B' laid in trenches or floors or fixed to walls complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) pipes, type 'B' single socketed, in any length, with rubber ring joints 110mm dia laid in trenches or floors or fixed to wall complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.18 sqm but n.exc . 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) including dismantling the existing tiles complete all as specified and as directed. MAKE:-SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)

Material and labour for non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.11 sqm but n.exc . 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) including dismantling the existing tiles complete all as specified and as directed. MAKE:- SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)

Material and labour for glazed coloured ceramic tiles as in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm/ 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including backing coat 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces complete all as specified and as directed. MAKE:-SOMANY / JOHNSON / KAJARIA

Material and labour for viterous china urinals, bowl type, flat back of size 465mm x 355mm x 265mm white with grating (back or corner wall type), complete including providing and fixing plugs, bedding urinal agianst wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe inclusive of fixing supply pipe to flushing cistern, trap and waste pipe) all as per Prayag cat part No 4998 or techno commercially equivalent models specified in PS complete all as specified and as directed.

Material and labour for stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings all as per Prayag Cat No 7326 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Material and labour for bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 8303 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix in repairs wall mixer, three in one, brass chromium plated, with complete accessories all as per Cat Part No PIS-70H of Prayag or techno commercially equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.

Material and labour for 15mm dia medium grade galvanised iron tubing with all fittings and fixed to wall, ceiling or laid in floors etc including taking down the existing complete all as specified and as directed.

Material and labour for 20mm dia medium grade galvanised iron tubing with all fittings and fixed to wall, ceiling or laid in floors etc including taking down the existing complete all as specified and as directed.

Supply and fix tubular towel rail of 20mm dia of 60cm in length, D shaped bracket, brass chromium plated including brackets all as specified and as directed.

Material and labour for PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia 610 mm long fixed in repairs complete all as specified and as directed.

Supply and fix PVC flush pipe of 32mm dia for low level cistern complete all as specified and as directed.

Supply and fix in repair cast iron nahani trap, with grating 100mm dia including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) fixed in repairs and including water leak proof treatment complete all as specified and as directed.

Supply and fix in repairs cast iron floor trap, with grating 75mm dia including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), fixed in repairs and including water leak proof treatment complete all as specified and as directed.

Supply and fix gun metal globe or gate valves 25mm bore of pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fix cast iron pipe 75mm dia in any length with or without ears with cement joints and fixed on walls complete all as specified and as directed.

Supply and fix cast iron pipe 100mm dia in any length with or without ears with cement joints and fixed on walls complete all as specified and as directed.

Supply and fix cast iron bend 75mm dia complete all as specified and as directed.

Supply and fix cast iron bend 100mm dia complete all as specified and as directed.

Demolition of stone slabs, precast interlocking tiles, paver blocks, chequered tiles of any description or thickness in floors, approns etc laid bedded and pointed in any mortar complete all as specified and as directed.

Material and labour for machine cut Kota stone slab flooring 20-25 mm thick over and including 15 mm thick screed bed in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Supply and fix 80 mm thick machine pressed precast concrete rubber moulded coloured inter locking paver blocks with coloured cement and pigment of any shape and size conforming to IS-15658-2006, M-40 grade laid over and including 50 mm thick sand cushioning all as specified and as directed.

Material and labour for chequered cement concrete tiles of 200x200x25mm size set, jointed and pointed in neat cement slurry in floors with grey cement and pigment all as specified and as directed.

Material and labour for plain cement concrete, (1:4:8), type D2, using 40 mm graded stone aggregate, 100 mm thick as in floors finished fair, even and smooth without using extra cement as in hard standing including demolition of cement concrete unreinforced in ground floors and pavings n. exc. 15cm thickness in any position all as specified and as directed.

Material and labour for 40 mm thick plain cement concrete, (1:2:4), using 20 mm graded stone aggregates as in floors finished fair, even and smooth without using extra cement as as in hard standing incl demolition of cement concrete unreinforced in ground floors and pavings n. exc. 15cm thickness in any position all as specified and as directed.

Material and labour for removing the leaking outlet of bends of dia 100mm or 75mm and repairing joints by PVC solvent or ordinary cement and closing the gap in out let by cement mortar for making leakage free duct walls followed by removal of weeds and vegetation on outlet side with hand tools only and injecting Monsanto's herbicide to prevent the growth of new plants in future, finishing all as specified and as directed. NOTE :- New changing of fittings, unserviceable pipes, bends and nahani traps will be paid and measured seperately.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finishing the surfaces even and smooth without using extra lime or cement including taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc.,all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement based paint (any tint) over a coat of primer on walls complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint (Apex Ultima Protek Asianpaints/ Nerolac excel top guard / Berger weathercoat long life 10 ) over a coat of weather proof primer including filling the cracks etc with crack filling material all as per manufacturers instructions complete all as specified and as directed.

Supply and fix 6mm thick corrugated or semicorrugated asbestos cement sheets fixed with "L" type or "J" type hooks in roofs, walls and ridge of any description and at any height including dismantling of asbestos cement corrugated, semi corrugated sheet in roof coverings all as specified and as directed.

Supply and fix for galvalume sheets having pitch 190mm, depth 29mm and thickness not less than 0.50mm (Galvalume base-PPGL trapezoidal profile sheets) fixed with aluminium self staging screws of size 50/75mm and aluminium washers of suitable size in roof covering including ridge, over laps shall be as specified by manufacturer, including dismantling of asbestos cement corrugated, semi corrugated sheet or any other in roof coverings all as specified and as directed.

Taking down shutters of area exc. 1.00 sqm but n.exc. 2.00 sqm each and removing from site complete all as directed by Engineer-in-Charge.

Supply and fix 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and as directed.

Supply and fix aluminium alloy anodised handle, cast type 100mm long complete all as specified and as directed.

Material and labour for plain cement concrete (1:4:8), type D2 using 40 mm graded coarse stone aggregate as in bed to drain pipes of 300 mm bore including forming cradles complete all as specified and as directed.

YOGESH KAUTIK SHEWALE

Sunhari Electricals

M/S S H KHAN ENTERPRISES

DARSHAN ENTERPRISES

L.K.R.TIWARI CONSTRUCTION

MAHESH DADAJI BACHHAV

Shri Sant Cosntruction

M/S JAYCONSTRUCTION CO