GE/PKT-58/2019-20

Amount

Taking down cement plaster of any description and thickness on walls/ceillings etc including racking out joints,hacking for key, scrubbing down with water etc complete all as specified and as directed

Material and labour for rendering 15 mm thick on brickwork or concrete wall surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 10mm thick in cement mortar 1:3 on ceiling fair faces of brick work or concrete surfaces finished even and smooth without using extrar cement.

Material and labour for preparing new plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.

Material and labour for preparing of new plasterd wall surfaces and applying of two coats of oil bound distemper over a coat of primer using chalk whiting etc complete all as specified and as directed.

Material and labour for preparation of new plasterd wall surfaces and applying of two coats of cement based paint over a coat of primer complete all as specified and as directed.

M & L for preparing new plastered surfaces of ceiling and apply three coat of white wash complete.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M & L for plain Cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate), 75mm thick as in sub base complete all as specified and as directed.

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.

Supply only 3 mm thick and 38mm wide glass dividing strips complete all as specified and directed.

Demolition stone slabs and tiles laid, bedded and pointed in any mortor description or thickness in floors, aprons etc complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over screed bed or bedding layer 20 mm thick in cement mortar 1:6 complete all as specified and as directed.

M & L for machine kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over backing coat 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

M & L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M & L for chequred cement concrete tiles 30 cm x 30 cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20mm thick secreed bed or bedding in CM 1:6 complete all as secified and as directed.

M & L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, culls, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up[top 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughjs and the like including weathering, sklughtly rounded or chamfered angles and throating, as directed in kerb/coping including necessary form work complete.

Dismantling of floor hearth and wall tiling incl cement morter bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M & L coloured joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:6.

M & L for coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

Demolition of stone/brick masonry in CM or cement/ lime mortarcomplete all as specified and as directed.

M & L for brick work with fly ash modular bricks,straight or curved on plan exc 6m mean radius built in CM 1:6 complrte all as specified and as directed.

M & L for brickwork with fly ash modular bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

M&L for precast cement concrete type B-1 1:2:4 (20mm graded agg) in cover slabs etc complete all as specified and as directed.

M & L for mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity).

Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap).

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete.

All as per ser item No 29.00 above but 1000 ltr capacity.

S & F in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore iron pipe and fixed.(Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms/40mm-690 gms) all as specified and directed by Engr-in-charge.

All as per srl item No 31.00 above but 25mm bore pipe all as specified and directed by Engr-in-charge.

S & F in repair Gun metal, globe or gate valves for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-charge.

All as per item No-33 above but suitable for 25mm bore pipe all as specified and directed by Engr-in-charge.

Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store.

Taking up or down steel tubing 20mm dia and connections including cleaning for refixing or removal to store.

Refixing old 15mm dia steel tubing and connection in new or old position to wall, ceiling or laid in floors.

Refixing old 20mm dia steel tubing and connection in new or old position to wall, ceiling or laid in floors.

S & F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc

S & F 20mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc

S & F in repairs vitreous china wash down water closet pan (Pedestal Pattern ) white including fixing bolts, plastic water closet seat, white, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete and including making good to floor to match with adjoining surfaces complete all as specified and as directed.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding, making good to floor and all fittings (excluding flushing cistern and flush pipe).

S & F in repairs Wash basins, Vitreous China (flat back type) 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand , waste pipe etc.

S & F in repairs Viterous China urinal, half stall type, white (excluding flushing cistern, flush pipe).

S & F in repairs urinal spreader of PTMT any colcour for fixing with 15 mm dia pipe etc.

S & F in repairs brass chromium plated health faucet with 1m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe or 2 in one tap. Make:- ALD -563 of Jaquar/ Hindware/ Parryware/ Cera/Prayag

S & F in repairs overhead shower 100mm dia round shape single flow (ABS Body chrome plated with grey face plate) with rubit cleaning system. Make : OHS-1989 of Jaquar/ Hindware/ Parryware/ Cera/Prayag.

S & F in repair wall mounted shower arms casted 190mm long light body round shape with flange. Make : SHA-477 of Jaquar/ Hindware/ Parryware/ Cera/Prayag.

S & F in repair corner glass shelf with bracket. Make : ACN-1173 of Jaquar/ Hindware/ Parryware/ Cera/Prayag.

S & F in repairs brass chromium plated toilet roll holder with flap. Make : AKP-35753P of Jaquar/ Hindware/ Parryware/ Cera/ Prayag.

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge.

S & F in repairs PVC 10 ltrs capacity valveless symphonic action type low level flushing cistern including flush pipe, cantilever brackets incluiding taking down existing cistern etc complete.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

Supply and fixed in repairs Pillar taps fancy type cast copper alloy chromium plated with capstan head without letter Hot or Cold water screwed down for 15 mm dia iron pipe.

S & F in repairs 15mm bore dia of pipe bib taps cast copper alloy, fancy type chromium plated, with capstan head screwed down, screwed for iron pipe of brass ferrule complete.

Supply and fixed in repair stop valve/angle cock fancy type cast copper alloy, chromium plated with capstan head serewed down for 15 mm dia iron pipe.

Supply and fixed in repair stop valve / angle cock fancy type cast copper alloy chromium plated with long shank and cup(concealed type) capstan head serewed down for 15 mm dia iron pipe.

S & F in repairs CP Grating with hole /without hole of dia 125 mm complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4 Sqm each.

Taking down shutters of any description n.exc 1.0 sqm each.

Taking down shutters of any description exc 1.0 sqm & but not exc 2.0 sqm each.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqm each

Taking down shutters of any description n.exc 1.0 sqm each and refixing in same opening after doing necessary repairs like :- easing, adjusting and replacing of builders hardware.

Taking down shutters of any description exc 1.0 sqm & but not exc 2.0 sqm each and refixing in same opening after doing necessary repairs like :- easing, adjusting and replacing of builders hardware.

S & F 2nd class plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

S & F pressed steel frame of size 165 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete, as specified

S & F pressed steel frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete, as specified

S & F 35 mm thick factory made second class hardwood rail and style plain framed panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as directed and specified.

S & F 35 mm thick factory made second class hardwood glazed /gauzed and skelton door shutters, open rebated & prepared to recive glass/ gauged etc as in mosquito proof door shutter etc with out sash bars, edges of framing plain, chamfered or rounded,fitted with cut & mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part I section 8, clasue 8.20(a) and fixed to chowkats

S & F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S & F MS work as in hold fasts, bands, straps and like conforming to Fe-290 Gde E-165

S & F MS butt hinges 100 mm size heavy weight cold rolled .

S & F MS barrel tower bolt 200mm long stove enameled black with bright bolt.

S&F MS pressed handle oval type, stove enamelled black 150mm size

S&F MS Sliding door bolts 300mm long plate type stove enameled black with bright bolt not less than 12mm dia with and incl a min 6 bolts and nuts four on bolt plate and two on staple plate.

S & F door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete including welding to steel frames.

M & L for cement concrete type B1, 1:2:4(20mm graded aggregate) as in bed plates for securing hold fasts & back filling of hollow portion of chowkats etc.

S & F steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing , guaging and two coat synthetic enamel paint over a coat of red oxide primer all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 all as specified and directed by Engr-in-Charge.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/seald to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the framed at site as per specification & drawing.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reiforced with MS square tube, supplying and fixing in opening as per specification and drawing.

S & F aluminium anodised barrel tower bolts of extruded section 150mm long complete,

S & F 125mm size,extruded aluminium alloy handles, fabricated type anodised.

S & F 100 butt hinges extruded aluminium alloy with galvanised mild steel hinges complete.

S & F in repairs aluminium anodised barrel tower bolts of extruded section 150mm long complete.

S & F in repairs 125mm size,extruded aluminium alloy handles, fabricated type anodised.

S & F in repairs 100 butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete.

S & F in repairs MS butt hinges 100 mm size medium weight cold rolled .

S & F in repairs butt hinges 75 mm size medium weight cold rolled .

S & F in repairs MS barrel tower bolt 200mm long stove enameled black with bright bolt.

S & F in repairs MS barrel tower bolt 100mm long stove enameled black with bright bolt.

S & F in repairs MS pressed handle oval type, stove enamelled black 150mm size

S & F in repairs MS pressed handle oval type, stove enamelled black 100mm size

S & F in repairs MS Sliding door bolts 300mm long plate type stove enameled black with bright bolt not less than 12mm dia with and incl a min 6 bolts and nuts four on bolt plate and two on staple plate.

S & F in repairs door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete.

S & F second class HW small fittings such as brackets of any type, latch and hinge blocks, brackets of any type, latch & hinge blocks, shaped door and window stops ad the like including al necessary labours articles n.exc 200 cucm each.

S & F MS butt hinges 65 mm size medium weight cold rolled .

S & F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F Sheet glass, pin head type or-dinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane , 3.0 mm thick complete all as specified and directed.

M & L for applying two coats of synthetic enamelled paint over a coat of pink primer over wood & wood based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces.

M & L for applying two coats of synthetic enamelled paint over steel and iron surfaces of any description , not other wise described over 10 cm width or girth including preparation of new surfaces.

S & F in repairs 75mm PVC(SWR) floor trap plain with grating incl jointing with solvent cement.

S & F in repairs 75mm PVC(SWR) multi floor trap with gratings incl jointing with solvent cement.

S & F in repairs PVC urinal waste pipe min 800 mm long.

S & F in repairs fexilble PVC Wash basin waste pipe 800.

S & F in repairs mild steel powder coated curtain rod 20 mm dia, 1mm thick complete as approver by GE.

S & F in repairs mild steel powder coated curtain rod brackets with funel fancy type suitable for 20mm dia rod complete as approver by GE.

S & F in repairs mild steel handles with nut and bolt suitable for steel windows/ventilators all as specified and as directed by Engr-in-Charge.

S & F in repairs mild steel peg stay with nut and bolt suitable for steel windows/ventilators all as specified and as directed by Engr-in-Charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for.

S & f framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde-E-250) quality-A.

S & F mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

M & L for 2nd class hard wood fillets square, rectangular or triangular in section, clean swan, secured with nails or brads of size n. exc 3 sqcm fixed in repairs.

M & L for 2nd class hard wood fillets square, rectangular or triangular in section, clean swan, secured with nails or brads of size 3 sqcm but n exc 6 sqcm and fixed in repairs.

S & F 2nd class hardwood, plain fillets, square, rectangular or triangular in sectional area exc 13 sqcm and n.exc 25 sqcm, fixed in repairs.

Material and labour for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of distemper oil emulsion of any colour complete all as specified and as directed.

Material and labour for complete removal of existing treatment of wall surfaces and applying two coat of distemper oil emulsion of any colour over two coats of smooth wall care putty complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint of any colour complete all as specified and as directed

Material and labour for complete removal of existing treatment of wall and applying two coat of cement base paint over a coat of primer of any colour complete all as specified and as directed

Material and labour for preparation of old plastered or unplastered decorated surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots up to any height and applying one coat of white wash complete all as specified and as directed

Material and labour for preparation of surfaces of walls/bands/ slabs up to any height by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of weather proof paint any colour over a coat of primer complete all as specified and as directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with PVC terminal sunk boxes with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. NOTE :- a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc all as directed.

All as per item No 127.00 above but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 127.00 above but for one 3 pin 5 Amp socket outlet on same board.

All as per srl item No 127.00 above but one bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size all as per specified and directed.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of sunk boxes with suitable and thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as specified. Note:- a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc all as directed.

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as specified and directed

Supplying & Fixing Switch Bell push, flush type, 5 amp one way complete all as specified and directed.

Supplying & Fixing Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed.

Supplying & Fixing switch socket out let, 6 pin, 5/ 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block complete all as specified.

S&F Buzzer Ding Dong, AC 230 Volts single Phase complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as specified and directed.

S&F Ceiling fan regulator 230 Volts AC Rotary Step/ Dimmer as per site requirement 450W, 250V, including necessary connection complete all as specified and as directed.

S&F LED 230 volts, 50 HZ , inverter LED 9 Watt lumen 900 lm rated current 0.045A, CRI less than 80, charging time 8 to 10 Hours, operatin temperature - 10 to 50 degree celcius, back time 04 Hours, complete all as specified and directed.

S&F in replacement LED tube light fitting 1x20 W inverter batten type fitting 4 feet ling aluminium extruded housing, IP-20 rated voltage 230 V , 50Hz system wattage 20EW +/- 10% . System current lesss than 102ma, power factor more than 0.95, system lumen efficiency 100 lm / watt, CCT 6500K CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site or directed.

S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet ling of same make having ballast , bipin holder, connector block etc. complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site or directed.

S & F Aesthetically designed 2x2 LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination 34W LED PLUTO PANEL including required connection wire up to connector and all as specified and directed by Engr-In-Charge.

S&F in replacement of Bldg Securirty light fitting with 25 watt LED type JETA NEO 100 New Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light,suitable for highlighting architectural facade and general purpose lighting. and required connection wire multistand 1.5 Sqmm 3 core sheathed weather proof up to Ceiling rose/ ACSR conductor Conector box and all as specified and directed.

S&F in replacement of Ventilation fan AC single phase 230/240 Volts of size 200mm sweep having plastic body with louvre including connecting to ceiling rose all as required or directed including connecting to ceiling rose all as required or directed. Note:- Test report and Warranty certificate from OEM for minimum 2 years to be submitted berore claiming for payment.

S&F in replacement iron clad, with double door 4 way IP-54, 1K-09 protection, cement sprill prptector sutable for MCCB as incommmer AC 415 Volts three pole with thermal release adjustable type (80% to 100%) and MCB as outgoing complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 ple 415 Volts 125 Amps rating with rupturing cap 25 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at sit or directed. ( Outgoing MCB will be measured speparately)

S&F in replacement MCBs single pole and neutral link (SP) 5 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards all as specified.

S&F in replacement MCBs single pole, neutral link (SPN) 32 to 63 Amps with 10 KA breaking capacity of 'C' series in distribution boards all as specified.

S&F in replacement sheet metal enclosure with SPN DB's 8 Way (Grounted in walls) double door type IP-43 Protection. Isolated Neutral, Door earthing cement spill protector, IK-09 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed . ( Out going MCB will be measured separately).

M & L for replacement of existing unsv sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

S&F sheet metal enclouser single pole and neutral with a 2 Pin and earth plug and socket 20A 240V complete with one single pole MCB of capacity 20A complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate up to 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe up to main board, funnel with wire mesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 m earthing wire .)

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

All as per srl item no. 153.00 above but 4.00 Sqmm.

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE 25 sqmm 4 core, PVC insulated, armoured heavy duty electric cable with aluminum conductor,1100 Volts grade, cross section area. Note : (I) Earth work and all connected item shall be measured and paid separately .

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5mtr in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed.

Returning filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25cm completed all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5M above the starting point complete all as directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified

Supply and laying well burnt bricks sub class 'B' in trenches for cable protection of U/G cable all as specified and directed by Engr-in-Charges

Supply and fixing in replacement of Socket outlet 2 in 1, 3 pin, 5A complete in existing circuit as directed by Engr-in-charge.

Supply and fixing in replacement of switch piano flush button single pole one way 5 Amp 230 volts in existing circuit as directed by Engr-in-charge.

Supply and fixing in replacement of Switch Socket outlet 6 pin,5/15 Amp mult purpose 2 in 1 flush type, 230 volts complete in existing circuit as directed by Engr-in-charge.

Supply and fixing in replacement of Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings in existing circuit as directed by Engr-in-charge.

S&F in repl of LED 230 volts, 50 HZ , inverter LED 9 Watt lumen 900 lm rated current 0.045A, CRI less than 80, charging time 8 to 10 Hours, operatin temperature - 10 to 50 degree celcius, back time 04 Hours,in existing circuitas directed by Engr-in-charge.

S&F in replacement LED tube light fitting 1x20 W inverter batten type fitting 4 feet ling aluminium extruded housing, IP-20 rated voltage 230 V , 50Hz system wattage 20EW +/- 10% . System current lesss than 102ma, power factor more than 0.95, system lumen efficiency 100 lm / watt, CCT 6500K CRI more than 80, THD less than 30%, driver efficiency more than 85% in existing circuitas directed by Engr-in-charge.

S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet ling of same make having ballast , bipin holder, connector block etc.in existing circuit as directed by Engr-in-charge.

S & F in replacement f Aesthetically designed 2x2 LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination 34W LED PLUTO PANEL in existing circuit as directed by Engr-in-charge.

S&F in replacement of Bldg Securirty light fitting with 25 watt LED type JETA NEO 100 New Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light,suitable for highlighting architectural facade and general purpose lighting in existing circuit as directed by Engr-in-charge.

S&F in replacement of Ceiling fan regulator 230 Volts AC Rotary Step/ Dimmer as per site requirement 450W, 250V,in existing circuit as directed buy Engr-in-charge.

S&F Buzzer Ding Dong, AC 230 Volts single Phase.

M&L for one single core 1.5 Sqmm nominal cross sectional area multistrand copper conductor cable PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed

All as per srl item no. 171.00 above but 2.5 Sqmm cable.

All as per srl item no. 171.00 above but 10.0 Sqmm cable.

S & F flexible wire 23/0.0076 twin core twisted.

S & F Capacitor up to 2.5 MFD complete all as specified and directed by Engr-In-Charge.

Supply only PVC Medium grade conduit 20mm dia.

Supply only PVC wall plug WP 38 ( 100 Nos).

Supply only wood screws No - 8 ( 100 Nos).

Supply only Machine screws No - 8 ( 200 Nos).

Supply only self adhesive PVC Electrical insulation tape thickness 0.125 mm width 25 mm length 25 mtr.

Supply only self adhesive PVC Electrical insulation tape thickness 0.125 mm width 40 mm length 25 mtr.

S&F in repair Hylum sheet 4x4 to 4x6 inches for switch socket combination 05 pin 05 Amp including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed by Engr-in-Charge.

S&F in repair Hylum sheet 6x10 to 8x10 inches for switch socket combination 05 pin 15 Amp including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed by Engr-in-Charge.

S&F in replacement of old unsv wooden box with PVC switch box with sheet cover surface/ concealed 4x4x2 to 6x4x2 inches for switch piano type and regulator including cutting for switch & regulator and fixing to existing sunken box with screw with one washer complete all as specified and directed by Engr-in-Charge.

S&F in replacement of old unsv wooden box with PVC switch box with sheet cover surface/ concealed 8x6x2 to 8x10x2 inches for switch piano type and regulator including cutting for switch & regulator and fixing to existing sunken box with screw with one washer complete all as specified and directed by Engr-in-Charge.

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 1,04,382.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder within 28 days from the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249

Abrol construction co

GANDOTRA CONSTRUCTION CO

Raghbir chand

M/S SALARIA BUILDERS

RD Engineers