Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹48.1 L+₹4.1 L (9.33%)Rejected-AOC | L2 | Rejected-AOC Not being lowest | |
| 3 | L3₹48.5 L+₹4.5 L (10.2%)Rejected-Finance | L3 | Rejected-Finance Not being Lowest bidder | |
| 4 | L4₹49.0 L+₹5.0 L (11.4%)Rejected-AOC | L4 | Rejected-AOC Not being lowest | |
| 5 | Rejected-Technical NO 6 NJ BUILDING GANGAMMA TEMPLE ROAD JALAHALLI POST BANGALORE 560 013 | BANGALORE | BANGALORE | KARNATAKA | 560013 | - | Rejected-Technical Firm being one class below eligible class, not submitted / uploaded shortfall documents |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
8 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R nd D West Bengaluru
GARRISON ENGINEER I R nd D WEST BANGALORE DRDO COMPLEX CV RAMAN NAGAR BANGALORE
REPAIRS REHABILTATION PERIODICAL SERVICES TO OTM MD ACCN AT CEPTAM DCA COMPLEX ALISDA AND MTRDC UNDER AGE B R I R AND D WEST BENGALURU
2022_MES_534447_2
GE(I)/R ND D/BAN/TOKEN/28 OF 2022-2023 8983/E8
Open Tender
Civil Works
Item Rate
270 days
Bengaluru
CLASS AND CAT AS PER NIT
8 documents required · 8 mandatory
₹500
Yes
₹76,000
Yes
13 Dec 2022
20 Oct 2022
15 Nov 2022
21 Oct 2022
8 Nov 2022
1 Nov 2022
21 Oct 2022 - 25 Oct 2022
Amount
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing of debris outside MD land complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) of any description and in any position, and disposing of debris outside MD land complete all as specified and as directed.
Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises and disposing of debris outside MD land complete all as specified and as directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water, etc., and disposing of debris outside MD land complete all as specified and as directed.
Uprooting or scrubbing plants / shrubs / flora / fauna on walls, girth not exceeding 100 mm, cutting holes in walls, digging out roots applying sulphuric acid / phenolic acid as per manufacturers instructions to burn out deep grown roots and making good the surface using CM 1:3 (mixed with and including water proofing compound) complete all as specified and as directed.
Cutting of tree branches of girth not less than 10 cm, falling on buildings, roof top (15 m height bldgs), by manual or mechanical method and removing the branches outside MD land as and when the cutting is completed all as specified and as directed.
Cleaning of leaves, dust, caked mud and other foreign material on the roof surfaces (up to six storied Bldgs) and to make the surface good for easy clearing of rain water through rain water pipes including removal of debris outside MD land and making good the surfaces complete all as directed. Note : Quoted rate shall deemed to include cost of scaffolding or ladders etc., required for approaching roof top.
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.50 sq m each all as specified and as directed.
Taking down shutters of any description of area exceeding 1 sq m and not exceeding 2 sq m each complete all as specified and as directed.
Dismantling of aluminium partitions / windows of any size and any description complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, separating and stacking the serviceable material and disposing the unserviceable material outside MD land complete all as specified and directed.
Material and labour for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.
Supply and fix Floor door stoppers of rubber and aluminium alloy powder coated, 150 mm size, with hard drawn steel spring, including taking down existing stopper complete all as specified and as directed.
Supply and fix floor door stoppers of rubber and aluminium alloy, powder coated, of 150 mm size complete all as specified and as directed.
Taking down unserviceable wire mesh, supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fix Door closer, aluminium die cast body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80 kg including taking down old door closer of any type all as specified and as directed.
Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long including taking down old tower bolts all as specified and as directed.
Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.
Supply and fix Aluminium alloy, anodized, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long including taking down existing sliding bolts all as specified and as directed.
Supply and fix Aluminium alloy, anodized, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed.
Supply and fix 100 mm long Mild steel Butt hinges medium weight cold rolled mild steel by welding to existing frame including taking down old hinges all as specified and as directed.
Supply and fix 100 mm long Mild steel Butt hinges medium weight cold rolled mild steel complete all as specified and as directed.
Supply and fix 150 mm Aluminium extruded alloy anodized handles, fabricated type including taking down old handles all as specified and as directed.
Supply and fix 100 mm Aluminium anodized Hasp and Staple safety type including taking down old hasp and staple all as specified and as directed.
Supply and fix 30 mm thick Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete including Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar (1:4) and finished to match with existing surface complete all as specified and as directed.
Supply and fix Factory made flush door shutters, 40 mm thick, solid core construction, with particle board core and plywood face panels, decorative face veneers on both sides surrounded with lipping complete all as specified and as directed.
Supply and fix Factory made flush door shutters, 35 mm thick, solid core construction, with particle board core and plywood face panels, decorative face veneers on both sides surrounded with lipping complete all as specified and as directed.
Supply and fix 150 mm Aluminium anodized handles, cast type all as specified and as directed.
Welding in repairs to steel windows / doors exceeding 2.5 cm but not exceeding 5 cm in length and thickness of metal to be welded not exceeding 6 mm complete all as specified and as directed.
Supply and fix in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed complete all as specified and as directed.
Material and labour for Plain Cement Concrete (1:4:8) type D2, using 40 mm graded stone aggregate as sunken slab filling mass concrete, complete all as specified and as directed.
Supplying only liquid based waterproofing compound complete all as specified and as directed.
Demolition of existing PCC tiles of any thickness and in any position, providing Material and labour, for rubber moulded Chequered cement concrete tile flooring with tiles of size 30 cm x 30 cm x 20-25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry, over and including screed bed of 15 mm thick in CM (1:4) complete all as specified and as directed.
Dismantling existing false ceiling framework including ceiling boards and providing Material and labour for providing false ceiling with 12 mm thick Gypsum board in true horizontal level, suspended on interlocking metal grid made of hot dipped galvanized steel section (galvanized @ 120 grams per Sq m including both sides) of 600 mm pitch standard, consisting of GI main -T runners (size 24 mm x 38 mm, minimum 0.33 mm thick sheet) spaced 1200 mm centre to centre, suitably spaced at joints to get required length 1200 mm long, and GI Cross 'T' of size 24 mm x 28 mm made out of minimum 0.33 mm thick sheet spaced @ 600 mm centre to centre, and form grid of size 1200 mm x 600 mm. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 23 mm x 35 mm x 1.6 mm thick, fixed to ceiling with 12.5 mm dia 50 mm long dash fasteners, the ceiling grid shall be fixed in level using GI suspenders 4 mm dia adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced 1200 mm centre to centre along maint 'T', including applying 1 mm thick putty, complee all as per manufacturers instructions and as directed. Note : Cost of gypsum boards, false ceiling grid with suspenders and Putty shall deemed to be included in quoted rate.
Dismantling existing false ceiling framework including ceiling boards and providing material and labour for Anodized aluminium snap grid of size 605 x 605 mm, as in ceiling, fixed with screws and suspended with 6 mm dia GI wire (apprx 1.2 m length) and adjusting to a uniform level, fixing of hangers to roof slab with cleats made of GI flat of size 40 x 3 mm, 60 mm long and Supply and fixing 12 mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid, complete all as specified and as directed.
Supply and fix powder Coated aluminium frames and shutters (minimum thickness of powder coating 50 microns) and fabricating for doors, windows, ventilators and fixed partitions with one (or) more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc complete all as specified and as directed. Note :- i) For payment purpose weight of aluminium section shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate, iii) Sheet glass and wire gauge shall be measured and paid for separately under respective items.
Supply and fix Anodised aluminium frames and shutters (minimum thickness of powder coating 50 microns) and fabricating for doors, windows, ventilators and fixed partitions with one (or) more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc complete all as specified and as directed. Note :- i) For payment purpose weight of aluminium section shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate, iii) Sheet glass and wire gauge shall be measured and paid for separately under respective items.
Supply and fix powder Coated aluminium window and ventilator shutters, side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified, complete all as specified and as directed. Note :- Sheet glass and wire gauge shall be measured and paid for separately under respective items.
Supply and fix Anodised aluminium window and ventilator shutters, side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified, complete all as specified and as directed. Note :- Sheet glass and wire gauge shall be measured and paid for separately under respective items.
Supply and fix in repairs, 7 mm thick aluminium grill of Deco Grill pattern DG 104, fitted in aluminium windows / ventilators, etc., fitted in and including aluminium channels in openings of windows / ventilators, complete all as specified and as directed.
Material and labour for 9 mm thick Pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice lamination & fixed with screws to timber/metal frame work as in cupboard shutters, shelves, partitions, etc. including taking down old shutters/shelves complete all as specified and as directed.
Material and labour, for 40 mm thick Plain Cement Concrete, (1:2:4), type B-1, using 20 mm graded stone aggregate as in floors, finishing the surfaces even and smooth by using extra cement all as specified and as directed.
Material and labour for 3mm thick glass dividing strip, 38mm wide , inserted in position in floor concrete when the concrete is green all as specified and as directed.
Material and labour, for 25 mm thick Plain Cement Concrete, (1:2:4), type B-0, using 12.5 mm graded stone aggregate as in sub-base of flooring complete all as specified and as directed.
Material and labour, for 75 mm thick Plain Cement Concrete, (1:3:6), type C1, using 20 mm graded stone aggregates, as in paving/ plinth protection laid in panels including necessary form work, finishing the surfaces of concrete even and smooth without using extra cement complete all as specified and as directed.
Renewing Ceramic tiles in patches, area not exceeding 5 sq m including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new ceramic tiles complete all as specified and as directed.
Material and labour, for Glazed ceramic coloured tiles of size 350 mm x 250 mm x 7-8 mm / 450 mm x 350 mm x 7-8 mm laid on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.
Material and labour, for Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7 to 8 mm laid on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.
Material and labour, for flooring with non-skid ceramic coloured tiles, 7 to 8 mm thick, (area of tile exceeding 0.06 sq m and not exceeding 0.11 sq m) laid, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour, for flooring with non-skid ceramic coloured tiles (area of tile exceeding 0.11 sq m and not exceeding 0.18 sq m), 7 to 8 mm thick, laid, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour, for Flooring with non-skid ceramic coloured tiles (area of tile exceeding 0.18 sq m and not exceeding 0.38 sq m), 7 to 8 mm thick, laid, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour, for Flooring with polished Vitrified tiles, Light shade 10 mm thick (Square / rectangular), area of each tile exceeding 0.36 but not exceeding 0.42 , set, pointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid over and including provision of cement screed of 15 mm thick in CM 1:4, complete all as specified and as directed.
Material and labour, for polished Vitrified tiles, Light shade 10 mm thick (Square / rectangular), area of each tile exceeding 0.36 but not exceeding 0.42 , laid on vertical surfaces such as dado, skirting etc., set, pointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid over and including provision of backing coat of 10 mm thick in CM 1:3, complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips etc., complete all as specified and as directed.
Supply and fix Plain Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane all as specified and as directed.
Supply and fix Figured glass, 4 mm thick, pin head type and glazing with oil putty/ aluminium beading in squares not exceeding 0.5 in each pane all as specified and as directed.
Re-securing glass of any description in existing metal frames, glazed with putty / beads including removing loose / decayed putty / beads, painting / oiling one coat on rebates, grooves, re puttying and painting / oiling puttied surfaces to match existing work all as directed. NOTE:- New length of frame re-puttied shall be measured.
Material and labour, for Rendering 15 mm thick on brick or concrete surfaces in cement mortar in CM 1:4 including mixing approved water proofing compound, finishing the surfaces even and smooth without using extra cement all as specified and as directed. NOTE:- Supply only WPC will be measured and paid separately under relevant item of BOQ.
Material and labour, for Rendering 15 mm thick on brick or concrete surfaces in cement mortar in two coats, 5 mm thick in CM 1:4 including mixing approved water proofing compound over 10 mm thick rendering coat in CM 1:6, and finishing the surfaces even and smooth without using extra cement all as specified and as directed. NOTE:- Supply only WPC will be measured and paid separately under relevant item of BOQ.
Material and labour, for Rendering 10 mm thick on brick or concrete surfaces in cement mortar (1:6) and finishing the surfaces even and smooth without using extra cement all as specified and as directed.
Material and labour, for Rendering 5 mm thick on brick or concrete ceiling surfaces in cement mortar (1:3) and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Providing 1 mm thick Brush bond RFX (two component acrylic polymer modified cementious coating consisting of Brush bond RFX powder and Nito bond BBX acrylic emulsion grey in colour of Make FOSROC) on old exposed concrete surface for bonding new cementious materials to existing cementious surface using stiff brush roller or trowel to obtain desired thickness complete all as per manufacturer's instructions, as specified and as directed.
Material and labour for, Preparation of old decorated plastered or un-plastered wall surfaces including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and as directed.
Material and labour for, Preparation of old decorated plastered or un-plastered ceiling surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling surfaces complete all as specified and as directed.
Material and labour for, Preparation of old decorated plastered or un-plastered surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on wall surfaces complete all as specified and as directed.
Material and labour for, Preparation of old decorated plastered or un-plastered ceiling surfaces including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and as directed.
Material and labour for, Preparation of old decorated plastered or un-plastered surface walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement based paint on wall surfaces complete all as specified and as directed.
Material and labour for, French polishing one coat on old surfaces of any description, width or girth including cleaning and preparing the surface over and including one coat of wood filler complete all as specified and as directed.
Preparation of new or previously untreated plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.
Preparation of new or previously untreated plastered ceiling surfaces of any description and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.
Material and labour for, Preparation of old plastered wall surfaces of any description and applying a coat of plastic emulsion complete all as specified and directed.
Material & Labour for Preparation of old plastered surfaces, applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gram/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 complete all as specified and as directed.
Material & Labour for Preparation of new or previously untreated plastered surfaces, applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gram/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 over and including priming coat of exterior primer applied @ 0.90 litre/ 10 over new surfaces
Material and labour for, Preparation of old wooden surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for, Preparation of new or previously untreated wooden surfaces of any description not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and labour for, Preparation of old steel surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for, Preparation of wall surfaces, writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high complete all as specified and as directed.
Taking down unserviceable GI tubing, supply and fixing new 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.
Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.
Cleaning and removing all scale and dirt etc from tanks of capacity exceeding 250 Litres but not exceeding 500 Litres and from mouths of circulating pipes etc., complete all as specified and as directed.
Cleaning and removing all scale and dirt etc from tanks of capacity exceeding 500 Litres but not exceeding 1000 Litres and from mouths of circulating pipes etc., complete all as specified and as directed.
Cleaning and removing all scale and dirt etc from tanks of capacity exceeding 1000 Litres but not exceeding 2000 Litres and from mouths of circulating pipes etc., complete all as specified and as directed.
Dismantling of water tanks of 500 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Dismantling of water tanks of 1000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 1000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Dismantling of water tanks of 2000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 2000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Supply and fix in repairs, Bib taps 15 mm dia, fancy type, chromium plated with CP flange all as per Cat No. F280002 of Hindware or equivalent in other makes specified complete all as specified and as directed.
Supply and fix Pillar taps, 15 mm dia, fancy type, chromium plated with CP flange, long shank all as per Cat No. F280001 of Hindware or equivalent in other makes specified here-in-after, after taking down old pillar taps complete all as specified and as directed.
Material and labour for, Swan neck Pillar taps , suitable for fixing to 15 mm bore, cast copper alloy chromium plated, fancy type, Cat No F200012 of Hindware or equivalent in other makes specified, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe including taking down existing taps complete all as specified and as directed.
Supply and fix in repairs, Stop valves, fancy type with CP wall flanges, chromium plated, cast copper alloy with long shank and exposed part kit with fittings sleeve, operating lever concealed part screwed both ends for iron pipe or for unions, including making good the disturbed portion matching with adjacent surfaces, complete all as specified and as directed.
Supply and fix, Health faucet, brass body with 1 metre long SS braided rubber hose pipe with wall hook all as per CERA Model No: F8030301 or equivalent in other makes specified as after taking down old faucet complete all as specified and directed.
Material and labour for, Vitreous china snow white, Counter type wash hand basin of size 550 mm x 430 mm x 195 mm all as per Cat No. C0466 (SP)) of Parry ware or equivalent makes specified including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces after taking down existing WHB complete all as specified and as directed.
Material and labour for, Vitreous china snow white, wash hand basin without pedestal of size 550 mm x 400 mm all as per Cat No. S2040103 of CERA or equivalent makes specified including CI brackets 450 mm long, PVC flexible pipe with both side brass nuts , 750 mm long PVC waste pipe of 32 mm dia, CP waste coupling and grouting with 6 to 8 mm dia GI racket bolt at the back side of WHB or inserting the CI brackets into wall and making good existing surfaces complete all as specified and as directed.
Taking down unserviceable EWC, supply and fixing new Vitreous china snow white colour floor mount type European Water Closet of size 520 x 360 x 390 mm with PVC seat cover and 'P' trap, fixing at a distance of 300 mm from wall with bolt including connection with flushing cistern, seat cover and with outlet pipe complete all as per Model CONVENTIONAL, Cat Part Nos B1510101 & S1050102 of CERA Make or equivalent in other makes complete all as specified and directed.
Supply and fix in repairs, Vitreous china snow white colour 'Orissa pattern' squatting pan of size 580 mm x 440 mm with PVC 'P' or 'S' trap and integral foot rest complete, all as per Cat No .S3010102 of CERA make or techno commercially equivalent in other makes specified connected to existing flush pipe including provision of cement concrete bedding all as specified and directed.
Taking down old sinks and Supply and fixing Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen over all size 915 mm x 460 mm with bowl size 405 x 355 x 178 mm all as per Cat No.SSSBSD-52 of Blue Star make or techno commercially equivalent in other makes specified including CP waste coupling of 40 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc. complete all as specified and directed.
Supply and fix in repairs, PVC valve less, syphonic action type, white colour flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and jointing with existing flush pipe and making good to the disturbed surfaces complete all as per Model No: CIENA PREMIUM Cat Part No B1010102 of CERA Make or equivalent in other makes all as specified and directed.
Supply and fix, Gun metal, globe or gate valves 15 mm bore with iron wheel head screwed both ends for iron pipe and including taking down old gate valve complete all as specified and as directed.
Supply and fix, Gun metal, globe or gate valves 20 mm bore with iron wheel head screwed both ends for iron pipe and including taking down old gate valve complete all as specified and as directed.
Supply and fix, Ball valves of 20 mm dia , (minimum weight 210 grams) , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and as directed.
Supply and fix, Ball valves of 25 mm dia , (minimum weight 455 grams) , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and as directed .
Supply and fix, PTMT waste coupling of 32 mm dia (minimum weight 45 grams), half or full threaded including taking down old coupling of any description complete all as specified and as directed.
Supply and fix, PTMT waste coupling of 40 mm dia (minimum weight 60 grams), half or full threaded including taking down old coupling of any description complete all as specified and as directed.
Supply and fix, PTMT grating doom 100 mm dia (with or without waste hole, minimum weight of 25 grams) after taking down old grating complete all as specified and as directed.
Supply and fix, PVC connecting pipe 600 mm long 15 mm dia both ends having brass coupling nut and PVC washer after taking down old connecting pipe complete all as specified and as directed.
Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 75 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.
All as per Serial Item No 117 here-in-above, but of 110 mm dia SWR Pipe.
All as per Serial Item No 117 here-in-above, but of 160 mm dia SWR Pipe.
All as per Serial Item No 117 here-in-above, but of 200 mm dia SWR Pipe.
Supply and fix in repairs, PVC (SWR) bends any radius 75 mm dia of bore fixed in pipes, complete all as specified and as directed.
Supply and fix in repairs, PVC (SWR) branch piece single equal of bore 75 mm dia, fixed in pipes, complete all as specified and as directed.
Supply and fix in repairs, PVC (SWR) bends any radius 110 mm dia of bore, fixed in pipes, complete all as specified and as directed.
Supply and fix, PVC (SWR) branch piece single equal of bore 110 mm dia, fixed in pipes complete all as specified and as directed.
Supply and fix, PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl all as specified and as directed.
Supply and fix in repairs corrugated waste pipe 32 mm dia, 800 mm long as per Cat Part No 327 of Prayag or techno commercial equivalent, for wash hand basin complete all as specified and directed.
Supply and fix, PVC multi floor trap 75 mm dia outlet with grating including dismantling the damaged trap all as specified and as directed.
Taking down old water tank cover and Supply and fixing Polyethylene water storage tank covers circular or any other type with hinges suitable for up to 1000 Litres capacity tanks all as specified and as directed.
Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) all as specified and as directed.
Supply and fix, Venetian blinds, vertical type, 100 mm wide with polyester fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary, including dismantling the old unserviceable venetian blinds complete all as specified and as directed. (Price shall not be less than ` 125/- per sq ft)
Supply and fix in repairs, stainless steel tubes, mirror polished, fixed as hand rails, ornamental fencing, chains, special articles etc.,(Grade SL-304) including necessary welding, grinding to smooth finish, and fixing to walls or floors with stainless steel plates with nuts, bolts, etc., complete all as specified and as directed.
Supply and fix in repairs vitreous China urinals, full stall type, white, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.
All as per Serial Item No 127 here-in-above, but of half stall type.
Supply and fix in repairs vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line complete all as specified and as directed.
Supply and fix in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.
Supply and fix 50 mm size brass locks 4 lever for cupboards including taking down existing old locks all as specified and directed.
eurekaenterprises
manoj trading agencies
Power and Telecom Systems
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .