Preparation of Master Plan for Construction of 1 no. of 33/220 kV Generating Substation for evacuation of power from 22.5MW Karbi Langpi Middle I and 24MW Karbi Langpi Middie II

Amount

Survey using total station/DGPS of the entire land area upto an offset of 10 m and the approach road outside the substation boundary, in 3 m X 3 m grid, proposed FGL, calculation of earth volume in cutting and filling seperately. Submit the contour drawing in AutoCAD 2D as well as 3D. **

Construction of two (2) nos. of permanent RCC benchmark pillars at suitable locations such that all future references can be obtained from them. Size of the pillar should be minimum 300mm X 300 mm HFL & FGL markings should be shown in the benchmark pillar.Construction of RCCpillar along the boundary of the plot at everey angular point with size 125mm X 125mm and 900 mm height

Preparation of Master Plan by marking of switchyard, control room, incoming and outgoing feeders, residential buildings, approach road, internal roads, drainage system, storm water management, Retaining wall, Boundary wall, security fencing, gate, street lighting etc required to complete a substation in AutoCAD

Detailed AutoCAD drawings of each building with plan of each floor, elevation and section from all sides, Plumbing and sanitary layout, Electrification details etc .

GA Drawing for Water supply arrangement including provision for bore hole, overhead tank, pipeline system, etc in detail.

Preparing a Proper Substation Layout Drawing to scale along with SLD clearly specifying the schemes on AutoCAD along with switchyard BOQ of every item

** HFL & FGL: Should be marked in the master plan(s). 6 set of printed copy of drawings shall be submitted and the Autocad files.

HI TECH DESIGN ENGINEERING N COSTRUCTION (BID ID -239681)