Repair Work to Kodali PT No. 5 Taluka Udgir District Latur

Item No.1:- Cleaning cutting thorny shrubs bushes, grass as directed with 15m lead and lift up to 1.5m.

Item No.2:- Removing Old revetment and stacking the material neatly as directed by Engineer in Charge.

Item No.3:- Excavation in Soft Strata without blasting including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and 6m lift.

Item No.9:- Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from localy available, excavated materials including labour, hand packing / wedging stone chips, finishing etc., complete with lead up to 50 m and all lifts excluding royalty of material

Item No.10:- Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from approved source from borrow area including cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with lead up to 50 m and all lifts excluding royalty of material.

Item No. 11 :- Providing and laying in situ cement concrete of grade M-15 (40 MSA) of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer considering lead of 50 m with shuttering and scaffolding, placing, compacting, curing etc. complete with an initial lead of 50 m. & lift of 1.5 m.

Item No.12:- Providing & fixing in position Tor Steel reinforcement bars as per design including cutting, bending, laying in position and hooking with G.I.Wire etc. for R.C.C. slabs, beams, chajjas, columns etc. complete as directed with lead of 50 mtr. and lift of 1.5 mtr.

Item No.13-:Providing and fixing canal information board of 1.2x0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x3 mm with cross bracing of size 25x25x3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/letters/numeral / arrows coated with non-peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60x60x75 cm as directed.

Please Enable Macros to View BoQ information