Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.1 LAccepted-AOC 8 28 BIJOYGARH P O JADAVPUR KOLKATA 700 032 | KOLKATA | WEST BENGAL | 700032 | L1 | Accepted-AOC Being lowest bidder and reasonable | |
| 2 | L2₹43.5 L+₹51,625 (1.20%)Rejected-Finance TIORKHALI MAHESHGANJ NADIA | NADIA | NADIA | WEST BENGAL | 790804 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹44.8 L+₹1.8 L (4.25%)Rejected-Finance PO CHANDL PS BISHNUPUR DIST SOUTH 24 PGS PIN 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹44.9 L+₹1.9 L (4.51%)Rejected-Finance 35 PATHAK PARA ROAD FLAT NO 32C 3RD FLOOR SHANTINEER APARTMENT BEHALA KOLKATA 700060 | KOLKATA | KOLKATA | WEST BENGAL | 700060 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹45.0 L+₹2.0 L (4.72%)Rejected-Finance BHANGARMATH THAKURANI CHAWK PO SAMABYPALLY BALLY HOWRAH 711 205 WEST BENGAL | HOWRAH | WEST BENGAL | 711205 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
29 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
COMPREHENSIVE REPAIR/MAINT TO BLDG NO. T-465, T-23, BI-28, 29, P-37, P-46, P-108, F-6, F-10, SM-86, SM-87, SM-92 AND OTHER CONNECTED BLDGS UNDER GE (FW) KOLKATA.
2023_MES_602102_1
8132/E8
Open Tender
Civil Works
Item Rate
210 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹80,000
17 Aug 2023
8 Jun 2023
30 Jun 2023
8 Jun 2023
29 Jun 2023
22 Jun 2023
Amount
Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as direct.
Taking down chowkats of frames with shutters (without taking off shutters, from the frames) exc 1.50 Sqm but n exc 4.0 sqm each and removing to store/from site complete all as specified and directed.
Taking down chowkats of frames with shutters (without taking off shutters, from the frames) not exceeding 1.50 Sqm each and removing off the site complete all as specified and directed.
Taking down shutters any description exc 1.0 but not exc. 2.0 sqm each and removing to store/from site complete all as specified and directed.
Taking down shutters any description exc 1.0 but not exc. 2.0 sqm each and refixing in the same opening after necessary repair like easing etc complete all as specified and directed.
Hacking out old broken glass (any thickness size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones., complete all as specified and directed.
Hacking out old broken glass (any thickness size quality or description) from wooden frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones., complete all as specified and directed.
Demolition of plain cement concrete in ground floors and pavings not exc 150 mm thickness (above or below ground level) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties wtc complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar including all quaries, arches pillars etc and removing off the site complete all as per specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.
Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
Dismantling of AC corrugated/semi corrugated sheets including ridge as in roof covering and removing off the site complete all as per specified and directed.
Dismantling of wall Lining and ceiling board (fibre, pulp, insulation etc.,) incl snap grid frame of any thickness including cover fillets complete all as specified and directed.
Taking out old GI pipe lines 15 mm bore including cleaning for refixing or removal to store complete all as specified and directed.
- ditto all as per Item No. 15.00 but 20 mm bore of pipes.
- ditto all as per Item No. 15.00 but 25 mm bore of pipes.
S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F 35mm thick Factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc.(with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as specified and directed.
M&L for 35 mm thick factory made 2nd class hardwood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces of complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet supplying & fixing in opening as per specification & drawing.
S & F factory made solid panel PVC door shutter of 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in frame complete all as specified and directed.
M&L for Flush shutters, solid core construction, 30 mm thick, with block board core and plywood face panels, commercial type on both sides, as in repair, complete all as specified and directed.
S&F in repair powder coated (medium thickness of powder coating 50 micron) Anodized aluminum frame for doors, windows, ventilators and partition with one or more rebate including joining cleat for fixing etc complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges, Mortise lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc as per manufactures instruction complete all as specified and directed. (NOTE: Glass shall be measured and paid separately)
M&L for powder coated anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges types B-21 100 mm long (2No) suitable handle (1No) complete all as specified. (NOTE: Glass shall be measured and paid separately)
S&F powder coating aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction.
S&F aluminium anodised door frame size 100mmX63mmX2mm thick and shutter size 50mmX45mmX2mm thick as in top rail and style and 100mmX45mmX2mm thick in bottom and lock rail including complete fitting and fixtures and mortice lock, 'D' type handles, hydraulic door closure and 5 mm thick glass panes incl dismantling of existing door frame complete all as specified and directed.
M&L in repair aluminium, anodised partition with frame of size 63X38X2mm thick and fixing hold fast with snap beading rubber gasket etc incl dismantling of existing partition frame complete all as specified and directed. (NOTE: Sheet glass/particle board for partition shall be measured and paid seperately)
S&F 5.5mm thick sheet frosted glass, ordinary quality, glazing with cleats, glazing clips, rubber neoprene packing etc, in squares exceeding 0.5 sqm in each pane complete all as specified and directed.
M&L solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed.
S&F anodised powder Coated aluminium frame (size 92.36 mm x 29.7 mm x 1.5 mm thick channel size 30.10 mm ) @ 1.122 kg/RM (three track) for doors, windows, vantilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F anodised powder Coated aluminium window shutter (size 41 mm x 20 mm x 1.60 mm and railing size 20 mm) @ 0.50 kg/RM (three track) for doors, windows, vantilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth of 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for sheet glass 3mm thick figured glass pin head type and glazing with oil putty in square n. exec 0.5 Sqm in each pane, complete all as specified and as directed.
S&F 150 mm size aluminium anodised barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.
S&F 200 mm size aluminium anodised barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.
S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.
S&F in repair 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.
S&F Butt hinges, stainless steel, size 75 mm complete all as specified and directed.
S&F Butt hinges, stainless steel, size 100 mm complete all as specified and directed.
S & F aluminium handles 125 mm long cast type, anodised complete all as specified and directed.
S & F aluminium handles 150 mm long cast type, anodised complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded for fixing wire mesh including one shop coat of priming, complete all as specified and directed. (NOTE : Sheet glass for glazing shall be measured and paid seperately as "Supply only")
M&L for repair to steel window including welding, binding of steel section, repair to hinges, fixing of stay and handles etc n.exc 1.5 sqm complete all as specified and directed.
M&L for repair to steel window including welding, binding of steel section, repair to hinges, fixing of stay and handles etc exc 1.5 sqm but n. exc 4 sqm complete all as specified and directed.
S&F in repairs Chromium Plated 25mm dia brass chromium plated curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F in repairs fancy type metal finish curtain bracket fixed to walls complete all as specified and directed.
M&L 19/20mm thick pre-laminated particle board as in cup board shutter double leaf one side decorative of sheds and other side balancing white lamination. All edgs properly seald with 5mm thick 2nd class hard beading fixed with water resistant adhesive except rebate side which shall be of 25mm thick as in repair complete all as directed.
S&F Door closer hydraulically regulated, designation No. 3, universal type, aluminium (die cast) body, suitable for door shutters of 851 to 1000 mm in width & weight between 61 to 80 kg complete all as specified and directed.
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished complete all as specified and directed.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
S&F in repair Brass ordinary rat tail rod pattern springs including roller and roller plate, 300 mm complete all as specified and directed.
M&L granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded aggregate) in sub base, foothpath, floors etc. finished even and smooth without using extra cement complete all as per specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded aggregates as in flooring, sub base etc finished evan and fair complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-2014 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L for Rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachmentconforming to FE-410-W (Gde- E-250) quality B complete all as specified and directed.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
- diito all as per Item No. 58.00 above but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.
M&L for 6 mm thick asbestos cement, corrugated sheet in roof, wall fixed with L type or J type hook complete all as specified and directed.
S&F in repairs fibre glass reinforcement translucent corrugated sheeting of 2 mm thick with two corrugation side lap fixed with fixed with L type or J type or cranked hook bolts in roofs, walls etc, complete all as specified and directed.
M&L for brick work with fly ash brick straight or curved on plan exc 6.0 mtr mean radius built in 1:6 cement mortar, complete all as directed
M&L 15mm thick cement plaster on brick or concrete walls in cement mortar 1:6 finishing even and smooth without using extra cement complete all as a specified and as directed
M&L 15mm thick cement plaster on brick or concrete walls in cement mortar 1:4 finishing even and smooth without using extra cement complete all as a specified and as directed
M&L 5 mm thick rendering on fair faces of concrete surfaces in cement mortar (1:3) as on ceiling finishing concrete surfaces even and smooth without using extra cement complete all as specified and directed
S&F Non-skid joint free ceramic tiles, 7-8mm thick area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15mm thick screed bedding in cement mortar 1:6 complete all as a specified and as directed
S&F Non-skid joint free ceramic tiles, 7-8mm thick area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15mm thick screed bedding in cement mortar 1:6 complete all as a specified and as directed.
S&F glazed coloured ceramic tiles in vertical surface, as per approved design, size 300 X 450 X 7 mm or 350 X 250 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and incl 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and joined in neat cement slurry and pointed in colored cement to match over 15 mm thick screed bed of cement mortar 1:4 complete all as specified and directed.
Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris complete all as specified and as directed.
M&L for 25 mm thick PCC(1:2:4) type B-0 (using 12.50 mm graded Stone aggregate), as in roof padding mixed with water proofing compound and the concrete surfaces is to be finished even and fair (without using extra cement) complete all as directed by Engineer - in - charge . (NOTE: WPC Shall be measured & paid separately)
M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane.
Supply only liquid Water Proofing Compound, conforming to IS and as approved, complete all as specified.
S&F False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on powder coated aluminium snap grid to support the boards/files with powder coated aluminium anodised main 'T' section 36mm x 25mm x 1.40mm, cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)
S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
M&L in repair 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws timber / aluminium frame work/partition complete all as specified and as directed.
S&F 1 to 2 mm thick sunmica fixing to plywood all as per specified and directed.
S&F Brass 2 levers locks , cupboard , grade I, Size 50 mm complete all as specified and directed.
S&F in repair 6 lever brass type Mortice lock vertical type size 100mm complete all as specified and directed.
S&F in repair Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, overal length of cover plate 150 mm complete all as specified and directed.
S&F in repair vitreous china floor mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed. (Make : JAQUAR, Cat No: OPS-WHT-15853S300UF / PARRYWARE, Model: Omega / HINDWARE, Model: SPELNDOUR)
S&F in repairs Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : Ess Ess, Cat No: ND-01 / JAQUAR, Cat No: OPP-15001PM / CERA, Cat No: F1005101/ ASIAN PAINTS, Cat No: SRPC101 / HINDWARE, Cat No: F360001 / PRAYAG, Cat No: 8102 / PARRYWARE Cat No. G3102A1)
S&F Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: V-302 / CERA, Cat No: F2003151 / JAQUAR, Cat No: FLR-5047N/ PARRYWARE, Cat No: G3104A1 / / PRAYAG, Cat No: 9306 /HINDWARE, Cat No: F280002SCP)
S&F in repair Chromium plated brass Wall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No : KUP-35125PM /CERA, Cat No: F1005413 / PRAYAG, Cat No: 9880 /HINDWARE, Cat No: F360019 / ASIAN PAINTS, Cat No: SRWM104 or equivalent model in PARRYWARE) NOTE: Telephone shower shall be measured and paid seperately.
S&F in repair stop cock cast copper alloy, fancy type, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or union for pipe 15mm bore, chromium plated complete all as specified and directed. (MAKE : PRAYAG, Cat No : PIS-26/PIS-28 /ESS ESS, Cat No: C-253/c-253A / ESSCO Cat No: DLX 513BKN)
S&F in repair 15mm bore chromium plated two-in-one bib cock with flange, fancy type complete all as specified and as directed. (Make : JAQUAR, Cat No: QQT-7041 / CERA, OCEAN / ESS ESS, Cat No. V-303 / PRAYAG, Cat No: 9212 / HINDWARE, Cat No: F330004P / PARRYWARE, Cat No: G1434A1)
S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : JAQUAR, Cat No: CON-041KN / CERA, Cat No: F1005161 / ASIAN PAINTS, Cat No: MYBC102 / PRAYAG, Cat No: 8111 / HINDWARE, Cat No: F390004 / PARRYWARE, Cat No: G1434A1)
S&F in repair corner glass shelf 300mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102/ ESS ESS, Cat No: AC-207A)
S&F in repair 80mm dia brass chromium plated shower rose with or without swivel joints for fixing with 15mm bore pipe etc complete all as directed. (Make : Essco, Cat No: EOS-541N /PRAYAG, Cat No: BS-73 / SOMANY, Model: ETHER / JAINKO, Cat No: FSJ-4 & SSR-1)
S&F in repair 15mm bore chromium plated central hole basin mixer without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : Essco, Cat No: SQT-516KN / ESS ESS, Cat No : T-118 / PRAYAG, Cat No: 7250 / SOMANY, Model: ETHER)
S&F in repair Tubular towel rail 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : Essco, Cat No : AEC-1111N / PRAYAG, CaT No: BA-40 / ESS ESS, Cat No : AC-701 / SOMANY, Model: ETHER)
S&F in repairs, 600mm x 600mm mirror with PVC frame and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. (MAKE : PRAYAG, Cat No: 553 or equivalent model in HINDWARE / PARRYWARE / POLYTUF / CERRA)
S&F in repair 6mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic PVC sheet complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete complete all as specified and directed. (MAKE : CERA, Cat No: B4512201 /PRAYAG, Cat No. 1239D / PARRYWARE, Cat No: C855099 or equivalent model in NIRALI / ANJALI / JAYNA) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
S&F in repair Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer including taking down existing rack complete all as specified and directed. (MAKE : PRAYAG, Cat No : P-340 or equivalent model in SUYOG / BLUE STAR / ANUPAM INDUSTRIES)
S&F in repair stainless steel grating flat round 102 mm size fixed with white cement complete all as directed. (Make : PRAYAG, Cat No : FT-62 or equivalent make as approved by GE)
S&F bath room cabinet with mirror including taking down existing cabinet complete all as specified and directed. (MAKE : PRAYAG, Cat No : 555 or equivalent model in HINDWARE / PARRYWARE / POLYTUF / CERRA)
S&F in repair Chromium plated brass Angular stop cock concealed type incl concealed body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Essco, Cat No: DLX-526NKN / ESS ESS Cat No. T-112 / PRAYAG, Cat No: 6510 / SOMANY, Model: ETHER / JAINKO, Cat No: AVJ-1)
S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323-ZK / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON)
S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and directed. (MAKE : PRAYAG, Cat No. 324-ZK / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON)
S&F in repair 32 mm bore PVC collapsible waste pipe, 800 mm long complete all as specified and directed. (Make: PRAYAG, Cat No: 3272 or equivalent make as spproved by GE)
S&F in repair Plastic seat cover in white of EWC with flat bottom incl hinging device complete all as specified and directed.
S&F in repair Chromium plated brass Towel ring complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG Cat No: BA-11 )
S&F chromium plated brass jet spray with one metre PVC tube including taking existing jet spray complete all as specified and as directed . (Make : Essco, Cat No ALE-547/PRAYAG, Cat No: BEA-17 or equivalent model in GEM / PARKO / LAURET / AQUEL)
S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: ESS ESS, Cat No: C-231C / PRAYAG, Cat No: BEA-23 / ESSCO, Cat No: ALE-773ML190x125)
Supply and Fix in repairs PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / PRAYAG, Model : Gracia or equivalent model in COMMANDER / CERA)
Repair only to flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.
Repair only to cascade type flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.
S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : CERA, Cat No: S3010109/ HINDWARE, Cat No. 20042 / PRAYAG, Cat No: 4054 / ASIAN PAINTS, Cat No: WM-32-X)
S&F 15mm bore galvanised steel tubing (medium grade) with all fittings and fixed concealed to walls and ceilings or laid in floors incl necessary scaffolding as required at site complete all as specified and directed.
- ditto all as per Item No. 114.00 here-in-before, but 20 mm bore
- ditto all as per Item No. 114.00 here-in-before, but 25 mm bore
Relaying/Refixing 15 mm bore GI tubing and connections in new or old position after thoroughly cleaning, with new fittings, laid in trenches complete all as specified and as directed by Engr-in-Charge. (Note : GI tubing obtained from item No. 15.00 to be re-used. Necessary earth-work to be measured and paid separately under relevant items)
Relaying/Refixing 20 mm bore GI tubing and connections in new or old position after thoroughly cleaning, with new fittings, laid in trenches complete all as specified and as directed by Engr-in-Charge. (Note : GI tubing obtained from item No. 16.00 to be re-used. Necessary earth-work to be measured and paid separately under relevant items)
Relaying/Refixing 25 mm bore GI tubing and connections in new or old position after thoroughly cleaning, with new fittings, laid in trenches complete all as specified and as directed by Engr-in-Charge. (Note : GI tubing obtained from item No. 17.00 to be re-used. Necessary earth-work to be measured and paid separately under relevant items)
Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 500 litres and providing necessary connections including dismantling old tanks all as specified and as directed by the Engineer-in-Charge.
- ditto all as per Item No. 120.00 here-in-before, but 1000 litres
- ditto all as per Item No. 120.00 here-in-before, but 2000 litres
Disconnecting exiting water storage Tank of capacity exceeding 500 litres but not exceeding 1000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.
Disconnecting exiting water storage Tank of capacity exceeding 1000 litres but not exceeding 2000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.
S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm bore (Minimum weight 210 gms) complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-152 or equivalent model in JEXON / POLYTUF / SHAKTI)
S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 25 mm bore (Minimum weight 455 gms) complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-153 or equivalent model in JEXON / POLYTUF / SHAKTI)
S&F in repair 32mm Waste coupling of PTMT (half or full threaded) complete all as specified and directed. (MAKE : PRAYAG, Cat No. 101/103 or equivalent model in POLYTUF / SHAKTI / JEXON)
S&F in repair CP waste coupling for stainless steel sink complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / Essco, Cat No: ALE-544FT/ Ess Ess, Cat No: C-230A)
S&F in repair swan neck pillar cock 15mm dia chromium plated cast copper alloy with round spout left hand knob operating screwed for iron pipe etc complete all as directed (MAKE : ESSCO, Cat No : MQT-510AKN / ESS ESS, Cat No: T-113B / PRAYAG, Cat No: 6414 / SOMANY, Model: ETHER)
S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) and making all necessary connections, making good disturbed Surfaces in Cement Mortar 1:3, including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. (Make of WHB : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141) NOTE: Waste pipe and coupling shall be measured separately)
S&F chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook, as in repairs, complete all as specified and directed. (MAKE : ESSCO, Cat No : ALE-ESS-583/ JAQUAR, Cat No: ALD-573/ CERA, Cat No: F8030401AB / ASIAN PAINTS, Cat No: C-232N / HINDWARE, Cat No: F160013 / PARRYWARE, Cat No: E8352A1)
S&F in repair vitreous china (white) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite/ JAQUAR Model: Conventional / CERA, Model: Conventional / HINDWARE, Model: SLICK)
S&F in repair PVC tank cover for 500 Ltrs PVC Tank complete all as specified and directed.
S&F in repair PVC tank cover for 1000 Ltrs PVC Tank complete all as specified and directed.
Dismantling of cast iron or reinforced concrete drain pipes, 100 mm bore, jointed in cement mortar and taking out of trenches, in required complete all as specified and directed.
S&F Cast iron (sand cast) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints all as specified, fixed on walls complete all as specified and directed.
Supply and fixing 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge.
S&F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and as directed by the Engineer-in-Charge.
S&F 100 mm bore cast iron (sand cast) bends with access door (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and as directed by the Engineer-in-Charge.
S&F Cast Iron Branch pieces, single (any radius, equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm bore pipe for any building height complete all as specified and directed.
S&F in repair CI cowl for 100 mm bore pipe complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with clamps for bldg height upto 4 storey complete all as specified and directed.
Supply and Fix, 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with clamps for bldg height upto 4 storey complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed.
Taking up/down plants or vegetation growth from wall up to roof level (from ground level upto fourth floor) by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superficial area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) or cement concrete (1:2:4) type B1 (using 20 mm graded aggregates) to disturbed portion and applying two coats of cement base paint/exterior emulsion paint over a coat of primer to match the existing surfaces complete all as specified and directed.
M&L for complete removal of existing treatment from wall surfaces and applying Two Coats of Distemper Oil Emulsion over a coat of alkali resistant primer and applied over 1 mm thick wall putty complete all as specified and as directed.
M&L Removal of existing treatment and applying two coat of plastic emulsion paint over a coat of primer to old decorated surfaces of wall including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and directed.
M&L for applying three coats of white wash to new plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
- ditto all as per Item No. 150.00 here-in-before, but on ceiling surface.
M&L for small repairs of hinges of doors and windows, adjusting sliding door bolts, tower bolts, repair of handles, mortice locks etc and similar works complete all as specified and directed.
M&L in repair Providing precast reinforced cement concrete RCPC drain cover 100 mm thick of size 900mm x 600 mm as in drain cover with capacity 3MT complete all as specified and directed.
M&L in repair Providing precast reinforced cement concrete RCPC drain cover 100 mm thick of size 600mm x 450 mm as in drain cover with capacity 3MT complete all as specified and directed.
Taking out old interlocking paver bock, of any description, thickness or situation and keeping aside neatly stacked for reuse or removal from site complete all as specified and directed.
Supply and laying machine pressed precast concrete interlocking paver block with grey cement and pigmnent of any shape and size as approved by GE conforming to IS 15658-2006 of 60 mm thickness, M-35 grade including taking out existing unserviceable paver blocks complete all as specified and directed. (NOTE: Sand for cushioning level will be measured and paid seperately)
Re-laying of serviceable interlocking paver block (retrieved under Item no. 156.00 herein-before), complete all as specified and directed.
M&L for sand filling under floors or or in foundations including watering and consolidation complete all as specified and directed.
M&L for preparing old decorated plastered surfaces of walls and applying one coat of cement based paint complete all as specified and directed.
M&L for applying one coat of acrylic distemper, finished with rollers to old decorated surfaces of wall including preparation of surface complete all as specified and directed.
M&L for applying one coat of acrylic distemper, finished with rollers to old decorated surfaces of ceiling including preparation of surface complete all as specified and directed.
M&L for preparation of old painted concrete or brick surfaces of any description and applying one coat of weather proof exterior emulsion on cornices, fins, fascia complete all as specified & directed.
M&L applying one coat of synthetic enamel paint on old steel surface of any description over 10 cm width or girth incl preparation of surfaces complete all as specified and directed.
M&L applying one coat of synthetic enamel paint on old wooden surfaces of any description over 10 cm width or girth incl preparation of surfaces complete all as specified and directed.
M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 2 mm thick exterior wall putty (in two layers) for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by scrapping and removing treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of 80 grit size having 7"- 9" dia (as required) including cleaning, watering to make the surface clean and free from dust, for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for applying 2mm thick wall care putty (in two layers) on old cleaned surfaces of walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
SHEIKH ENTERPRISE
UNITED ENGINEERS
MUKHERJEE ENTERPRISE
dutta and dutta
ARJUN DAS VALECHA
UNIVERSAL TRADING CENTRE
MS HORIZEN
M/S SHRI P K ACHARJEE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .