Lakhisarai Water Supply scheme under AMRUT 2.0

Financial Sheet

Name of work Lakhisarai Water Supply Scheme under AMRUT 2.0

Address of Bidder

Part - A (SOR Items), BOQ attached with the Bid Document Amount (In Rs.)

1 Lakhisarai Water Supply Scheme under AMRUT 2.0 1325277466

Quoted rate in Percentage (In Figure)

Quoted rate in Percentage (In Words)

ABOVE / BELOW / ESTIMATED COST

Total Quoted Amount after Above/Below (Part A)

Part - B (Non- Schedule Items) Unit Qty Rate Quoted Amount (In Rs.)

1 Detailed Survey, Engineering Design and Preparation of Drawings for Lakhisarai Water Supply Scheme Job 1

Supply, installation, testing and commissioning of Vertical turbine pump sets with allied equipment as under-

2 Supplying , erecting and commissioning of Vertical turbine pump sets (make: Kirloskar /WPIL/ Mather & Platt) as per IS 1710, capable of discharging 10940 LPM against a head of 52 m, consisting of bowl assemblies, bronze impellers, column assembly,stainless steel pump shaft, line shaft,etc.with all accessories coupled with energy efficient (IE3) squirrel cage induction motor confirming to IS:325 and IS:12615, having 10% more BHP than that of pump, operating on 1500rpm, 415V, 3 PH, 50 HZ [make: Kirloskar / ABB/BHEL /Marathon/CGL] all complete with required size of sluice valve and non-return valve, standard fitting, strainers, foot valve, reducer, pressure gauge, MS delivery & Suction pipe, common header,nuts & bolts, packings, fitting & fixing,labour & technician, etc. all complete job as per site requirement and direction of E/I. (Note:-Contractor will have to check the design of pump & motor and get it approved by the Department)

Therefore (2W + 1S) Pumps Have been taken (Discharge-10940 LPM,Head- 52 M) Set 3

3 Main Power Distribution Panel cum MCP for Raw Water to be installed at Intake Well Pump House:- Floor mounted cubical LT Motor Control Panel board fabricated with MS sheet of suitable gage and size, dust and vermin proof and painted consisting of proper power distribution 4 pole 800A copper busbar, 1 no. incoming feeder of 1200A MCCB, 4 nos. outgoing feeder of 400A for pumps sets,1 no. 400A MCCB outgoing Spare feeder, 2 no. 32A MCB feeder for lighting and utility, switch disconnected isolator (TPN) rated (800A-415V), selector switches,Volt-meters, Ampere-meters, indicator lamps etc. All complete with internal wiring, protection units/relays and capacitor banks of proper KVAR for Power Factor control, etc. all complete as per site requirement, Instruction of E/I. and IE rules. Job 1

4 Supplying, installation & commissioning of internal and external lighting with Led lamps with all other materials, Lightening arrestor for Pump house, fire fighting system, first aid, rubber matting, etc. Job 1

5 Cost of taking Power connection with metering from Bihar State Electricity Department, etc. all complete. Job 1

6 Earthing: making earthing as per IE Rule for each motors & stabilizer. Job 3

7 The proposed system shall include centralized monitoring and supervisory control of Intake Works, Raw Water Pumping System, WTP process units, clear water pumping stations, CWR/GLSR, OHT/ESR and other remote water supply installations, together with PLC/RTU based field automation, remote telemetry units, industrial communication gateways, IoT-enabled data acquisition, online flow/pressure/level monitoring, water-quality parameter monitoring, pump and motor status monitoring, energy and equipment parameter acquisition, automatic alarm/event management, historical data logging, trend analysis, MIS and operational reporting, centralized SCADA application, redundant communication architecture, control room servers and operator consoles, large display system, industrial network infrastructure, fiber-optic and wireless communication, 4G/5G telemetry connectivity wherever required, network switches, routers, firewall and cybersecurity provisions, UPS and backup power arrangements, PLC/RTU panels, field interface panels, instrumentation, control and communication cabling, integration with MCC/VFD/electrical protection systems, development of graphical process mimic screens, database and reporting platform, user management, system configuration, FAT/SAT, field installation, testing, commissioning, operator training, documentation and one-year post-commissioning support for the complete system. Job 1

Total Quoted Amount (Part B)

Total Quoted Amount (Part A + Part B)