PROVIDING SUPPLYING OF NEW FURNITURE ITEMS

Technical Specifications: Double Bed: A Bed frame is to be made by using 3" X 2" section size of M.P. Teak (5-8% moister content naturally seasoned) whose internal dimensions are 72" W X 75" L (Approx. 1829 mm × 1905 mm)and is technically integrated with 04 square shaped & chamfered legs made out of M.P. Teak (5-8% moister content naturally seasoned) of size 4" X 4" and having a height of 19" to be fixed in the four Corners of the Bed. The entire Bed frame is to be supported both vertically and horizontally by using 3" X 2" section size of M.P. Teak. The top of the Bed frame is to be covered water boiled/water proof 12 mm plywood of a superior quality. Similarly, to cover all four sides of the frame i.e. 6" down from the top a covering of 6" height made out of HDHMR 16 mm ply is to be placed in the four sides of the Bed. The back side of the Bed would be made in a BOX Pattern made out of HDHMR 16 mm ply whose thickness from the bottom would be 6" up till 24" and would reduce gradually to 2" from 24" onwards up till the height of 48". The entire BOX Pattern back rest side of the Bed would have Leathered cushioned in the center of size 72" W X 24" L Starting above mattress Height i.e. 24" having requisite 50 density 3" HD foam and leathered upholstered costing Rs 800/- Per meter overall dimensions and work as per enclosed photographs and shall be as approved by client Prior to the making of Bed. Bed Side Table: 02 Bed side table of outerdimensions 18" L X 16" W X 20" H(Approx. 427 mm × 406 mm× 508 mm) is to be made out of HDHMR 16 mm ply.Both Bed side tables would have double leaf designed shutter having Hinges, S.S Handles & Ball Catcher as per enclosed photographs and shall be as approved by client Prior to the making of Bed side table. Duco Paint:Application ofDuco paint on all sides of bed, bedrest area &02 Bedside Tables as per enclosed photographs and shall be as approved by client Prior to the making of these items. Dilution Ratio (Paint to Thinner): Typically, 1:1 to 1:2 depending on spray gun nozzle and ambient temperature. Primer Surfacer Ratio:1:0.75 (Duco Primer to Thinner). Air Pressure Required:At 25 to 30 PSI utilizing a standard compressor spray kit. Process of Duco: Smooth the Rough surface of HDHMR Surface with coarse sand paper of 100 No. → Apply Duco Putty → Dry → Rub with 120 No.sand paper → Apply Duco Primer/Surfacer→ Dry→ Rub with thinner + Emery 2-3 Times→ Spray first Duco coat →Dry & Rub→ Spray Second Duco coat→ Repeat till third final coat→ final rubbing with thinner.

Technical Specifications: A cushioned Easy Chair frame is to be made asper enclosed photographs in M.P. Teak (5-8% moister content naturally seasoned) whose overall size (outer to outer) would be 26" L X 32" W X 17" H(Seat Height from bottom) + 34" H(Back Height from bottom) which would enable to make a seat of cushioned easy chair whose seating area would be 24" in Length X 22" in Depth X 6" Foam / Cushion Height. The seat and the back (both front & back) would be cushioned with 50 density 3"- 4" HD Latex cushion and on top covered by 1" Super Soft Foam and finally covered with approved Sofa-upholsteryof minimum Rs 800/- per meter (Upholstery cloth should be a highly comfortable fabric its loop structure naturally resist wrinkles and allows the material to easily stretch) Melamine sealer + PU Top Coat Combo Full Gloss Polish on Cushioned Easy Chair: Mixing Percentage Melamine - Melamine Sealer: Melamine Hardner: Thinner = 100: 50: 150 Mixing Percentage PU – PU Clear: PU Hardner: PU Thinner = 100: 50: 150 Process of Melamine sealer + PU Top Coat: Smooth the Rough surface of M.P. Teak Surface with coarse sand paper of 120-180-220 No. → Use N.C. wood filler if required→ Apply First coat of Melamine Sealer → Dry → Rub with 320 No.sand paper → Clean dust → Apply Second coat of Melamine Sealer → Dry→ Rub with 400 No. water Sand paper until it become smooth → Spray First coat of PU Gloss top coat→ Light Rubbing with 400 No. water Sand paper until it become smooth→ Dry & Rub→ Spray Second coat of PU Gloss top coat → Hard Drying 8-10 Hours → Final finishing

Technical Specification: A Center Table frame is to be made by using 3" X 1.25" section size of M.P. Teak (5-8% moister content naturally seasoned) asper enclosed photographs whose overall size (outer to outer)would be 30" L X 20" W X 17" H(Height from bottom) {13.25" H(Leg Height) + 3" H(Center Table Frame Height ) + 0.75" H(Glass/Marbo lite Stone Height)} )and is technically integrated with 04 square shaped & chamfered legs made out of M.P. Teak (5-8% moister content naturally seasoned) of size 3" X 3" to be fixed in the four Corners of the Center Table. The Center Tableframe is to be supported both vertically and horizontally by using 1.5" X 1.5" section size of M.P. Teak. The top of the Center Tableis to be covered water boiled/water proof 18 mm plywood of a superior quality and on top of it an approved shade 4 mm natural Veneer is to be placed. Finally, 20 mm Marbo lite Stone having chamfered corners is to be placed BIDDER IS HERE BY DIRECTED THAT THE MAKING OF CENTER TABLE WOULD STRICTLY BE AS PER ENCLOSED PHOTOGRAPH THEREFORE, HE MAY CLOSELY OBSERVE THE DESIGN OF LEGS, PATTERN OF CENTER TABLE ETC. Melamine sealer + PU Top Coat Combo Full Gloss Polishon Center Table: Mixing Percentage Melamine - Melamine Sealer: Melamine Hardner: Thinner = 100: 50: 150 Mixing Percentage PU – PU Clear: PU Hardner: PU Thinner = 100: 50: 150 Process of Melamine sealer + PU Top Coat: Smooth the Rough surface of M.P. Teak Surface with coarse sand paper of 120-180-220 No. → Use N.C. wood filler if required→ Apply First coat of Melamine Sealer → Dry → Rub with 320 No.sand paper → Clean dust → Apply Second coat of Melamine Sealer → Dry→ Rub with 400 No. water Sand paper until it become smooth → Spray First coat of PU Gloss top coat→ Light Rubbing with 400 No. water Sand paper until it become smooth→ Dry & Rub→ Spray Second coat of PU Gloss top coat → Hard Drying 8-10 Hours → Final finishing.

Technical Specification: A Room Study Table frame is to be made by using 3" X 1.25" section size of M.P. Teak (5-8% moister content naturally seasoned) asper enclosed whose overall size (outer to outer) would be 42" L X 24" W X 30" H(Height from bottom) { 26.25" H(Leg Height) + 3" H(Room Study Table Frame Height ) + 0.75" H(Glass/Marbo lite Stone Height)} )and is technically integrated with 04 square shaped & chamfered legs made out of M.P. Teak (5-8% moister content naturally seasoned) of size 3.5" X 3.5" to be fixed in the four Corners of the Room Study Table. The Room Study Table frame is to be supported both vertically and horizontally by using 1.5" X 1.5" section size of M.P. Teak. The top of the Room Study Table is to be covered water boiled/water proof 18 mm plywood of a superior quality and on top of it an approved shade 4 mm natural Veneer is to be placed.Finally, 20 mm Marbo lite Stone having chamfered corners is to be placed BIDDER IS HERE BY DIRECTED THAT THE MAKING OF ROOM STUDY TABLE WOULD STRICTLY BE AS PER ENCLOSED PHOTOGRAPH THEREFORE, HE MAY CLOSELY OBSERVE THE DESIGN OF LEGS, PATTERN OF CENTER TABLE ETC. Melamine sealer + PU Top Coat Combo Full Gloss Polish on Center Table: Mixing Percentage Melamine - Melamine Sealer: Melamine Hardner: Thinner = 100: 50: 150 Mixing Percentage PU – PU Clear: PU Hardner: PU Thinner = 100: 50: 150 Process of Melamine sealer + PU Top Coat: Smooth the Rough surface of M.P. Teak Surface with coarse sand paper of 120-180-220 No. → Use N.C. wood filler if required→ Apply First coat of Melamine Sealer → Dry → Rub with 320 No.sand paper → Clean dust → Apply Second coat of Melamine Sealer → Dry→ Rub with 400 No. water Sand paper until it become smooth → Spray First coat of PU Gloss top coat→ Light Rubbing with 400 No. water Sand paper until it become smooth→ Dry & Rub→ Spray Second coat of PU Gloss top coat → Hard Drying 8-10 Hours → Final finishing.

Spices Rajma Masala MDH/Catch

Spices Red chili powder Packet MDH/Catch