Work 1

Providing, laying, spreading and compacting grade stone aggregates of OMC Mechanical Mix Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase /base course on well prepared surface and compacting with vibratory roller to achieve the desired density. subgrade and compacting with the road roller to achieve the desired loosing in situ layer and relaying of same with 25% addition WMM materials, (WMM+1%OPC Cement+3.5% Emulsion) (E.T.A.)

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing