Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.5 LAccepted-AOC 87 MARIUM MAHAL SADAR BAZAR BARRACK PORE 24 NORTH PGS | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹28.7 L+₹93,943.40 (3.38%)Rejected-Finance 26 A TARAPURI VISHNU NAGAR YAMUNA NAGAR | YAMUNA NAGAR | YAMUNA NAGAR | HARYANA | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹29.4 L+₹1.6 L (5.84%)Rejected-Finance 117 LENIN SARANI KOLKATA 700 013 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700013 | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹29.5 L+₹1.7 L (6.14%)Rejected-Finance 106 1 RAJA RAMMOHAN SARANI KOLKATA 700 009 | KOLKATA | WEST BENGAL | 700009 | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹29.8 L+₹2.1 L (7.42%)Rejected-Finance P 45 KHIRODE VIDYA BINOD AVENUE KOLKATA 700003 | KOLKATA | WEST BENGAL | 700003 | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹27.8 L
EMD Value
₹55,580
Closing Date
27 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
VIVEK TANENIA
GARRISON ENGINEER (CENTRAL) KOLKATA T 37 NAPIER ROAD HASTING KOLKATA 700022
PROVN OF TILLING AND ALUMINIUM WINDOW WORK UNDER GE (C) KOLKATA
2023_MES_577826_1
8553
Open Tender
Miscellaneous Works
Item Rate
180 days
KOLKATA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
Yes
GE (C) KOLKATA
₹55,580
Yes
15 Mar 2023
28 Jan 2023
28 Feb 2023
28 Jan 2023
27 Feb 2023
21 Feb 2023
28 Jan 2023 - 20 Feb 2023
Amount
Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.
Demolition of cement concrete(un-reinforced) in ground floors and pavings not exc. 15 cm thickness below or above ground level. complete all as specified and as directed.
Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in framed Work, complete all as specified and as directed.
Taking down Chowkats or Frames, (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed.
Taking down Chowkat or Frame (without taking off Shutter from the Frame) n exc. 1.50 Sqm complete all as specified and as directed.
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.
Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed.
Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removal to store complete all as specified and as directed.
Taking up or down Steel Water Tubing 20mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removal to store complete all as specified and as directed.
Taking up or down Steel Water Tubing 25mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removal to store complete all as specified and as directed.
Taking down unserviceable PVC (SWR) Pipes & Fittings of any size or pattern and in any Position (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed.
Surface Excavation not exc. 30 Cm deep and ave. 15 Cm deep and getting out in Soft/Loose Soil, complete all as specified and as directed.
Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed.
Removing excavated Material (Soil) exc. 250 m but n exc 500m and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed.
M&L Hardcore of gauge not exc. 63 mm, broken brick aggregate deposited, spread andlevelled in layers n exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.
M&L Plain Cement Concrete type C2 (1:3:6) using 40 mm graded aggregate) in Foundation, Filling and Mass Concrete, complete all as specified and as directed.
M&L Cement Concrete Type B1,1:2:4 (40 mm graded crushed stone aggregate) as in Holdfast Block including necessary form-work, etc., complete all as specified and as directed.
M&L Plain Cement Concrete type B-1, (1:2:4) (20mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed.
M&L Pre-cast cement concrete block masonry with solid blocks, PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) set in CM 1:4 exc. 10 cm in width and setting in morter complete all as specified and as directed.
M&L Chipping of unsound/weak concrete materials of 15mm to 25mm average thickness from columns/beams etc by any means including tapering all edges making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking material by air blasting or sand blasting incl foreign materials, loose concrete/aggregate etc upto four storey height of building including necessary scaffolding and safety measure complete all as specified and directed by Engr in charge.
M&L Removing concrete all around reinforcement including behind of reinforcement bars to give an average clearance of 25mm (but not less than 15mm clear air gap) by manual methods (hammering and using wire brushes, chieselling etc.) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcement bars by emery paper and cleaning the area throughly by water and alllow it to dry as per manufacturer's instructions to provide totally rust free finished steel surfaces, length of reinforcement bars cleared of concrete shall be measured for payment including upto four storey height of building upto 12mm dia of bars complete all as specified and as directed by the Engr-in-Charge. Make:- Fosroc/ Sika/ Hindcon Chemicals Ltd
Material and labour Cleaning of exposed concrete surfaces of lightly sticking materials including foreign materials, loose concrete/ aggregate etc and disposal of all debris upto distance of 50 m and applying single coat of epoxy bond adhesive on prepared non metallic surfaces (existing surface) by using brush as per manufacturers instruction / specification upto four storey of building complete all as specified and as directed by the Engr-in-Charge. Make:- Fosroc/ Sika/ Hindcon Chemicals Ltd
Supply and application Epoxy Zinc rich primer on the prepared reinforced surface by brush, the primer shall have a minimum specific gravity 1.75, minimum wet film thickness/coat 100 microns & dry film thickness/coat 40 microns. Minimum adhesive bond strength with steel is 1.5 N/mm2 upto upto four storey height of building complete all as specified and as directed by the Engr-in-Charge. Make:- Fosroc/ Sika/ Hindcon Chemicals Ltd
Supply and application free flow non-shrink cementitious micro concrete to the affected beam, column etc. above 45 mm but upto 60mm thickness (average) where major spalling has taken place even the core of concrete affected. The Micro concrete shall have a minimum 1 day compressive strength of 10 MPa and 28 days strength of 50 MPa, Minimum tensile strenght 2 N/mm2 @ 28 days, minimum Flexural strength 5 N/mm2@ 28 days tested as per BS 4551-80, Expansion characterstics Unrestrained expansion as per ASTM C827-1987 1 to 4%. including necessary formwork, upto any height including necessary scaffolding and safety measures complete all as specified and as directed by the Engr-in-Charge. Make:- Fosroc/ Sika/ Hindcon Chemicals Ltd
Supply and application Two component structural grade polymer modified reinstatement mortar where local spalling has taken place or shuttering is not possible. The Mortar can be applied from a minimum of 5mm to 15mm thickness in smaller vertical pockets and upto 100 mm thickness in horizontal applications. The Mortar should have a minimum compressive strength 12 N/mm2 in 1 day and 4 5N/mm2 in 28 days. Minimum Flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementitous systems to be mixed with cement slurry before the application of microconcrete to be used @ 6 lit/bag of cement. The bonding agent should have minimum compressive strength 24 N/mm2 Minimum Tensile strength 3.5 N/mm2, Minimum Flexural Strength 6.5 N/mm2 including necessary scaffolding and safety measures complete all as specified and as directed by the Engr-in-Charge. Make:- Fosroc/ Sika/ Hindcon Chemicals Ltd
M&L applying concure LP 90 or equivalent over concrete and cement plaster as curing compund as per manufactures instructions including necessary scaffolding and safety measures complete all as specified and as directed by the Engr-in-Charge.
M&L Cutting Chases in Brick Walls or any position where directed for Concealed Water Tubing/ conduit, Pinning in, Making Good to facings where required and Pointing in Cement Mortar 1:3 to making good, cutting not exc. 10 Cm girth, complete all as specified and as directed.
M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in Cement Mortar 1:6, complete all as specified and as directed.
Labour only Brick Work using old bricks obtained from demolition, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section wrought, secured with Nails, cross sectional area exc 6.0 Sqcm but not exc. 13.0 Sqcm complete all as specified and as directed.
M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section wrought, secured with Nails, cross sectional area exc13.0 Sqcm but not exc. 25.0 Sqcm complete all as specified and as directed.
S&F Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.
M&L Factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
M&L 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass , gauge, etc (without sash bars) , edges of framing plain, chamfered of rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and as directed.
S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
M&L Mild Steel Flat Iron 25 x 3 mm, as in Holdfast for Door, Window Frames or Chowkats etc., Wind Ties for Roof including securing bolts cut to length or drilled hole and fixed with Screw, etc., grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed.
M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.
Stripping of old tarfelt including layer of plaster or morter of any type of treatment carefully from roof surfaces (without damage of roof) and roughening of surface of old concrete roofing by picking, sweeping, cleaning and washing down with water to remove dust complete all as specified and directed.
M&L 20mm thick screed bed or bedding layer in CM 1:4 surface finished even and smooth without using extra cement for padding including neat cement slurry @ 3.00 kg /sqm complete all as specified and directed.
M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :- (a) Preparing and cleaning of fully dry surface as per IS:3067-1966. (b) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.50 Litre per Sqm. (c) Applying a layer of APP based Polymeric Membrance; 3.0mm thick (minimum) weighing 3.60 Kilogram per Square Metre (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. (d) Applying one coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane.
M&L False ceiling with 'E' board "Classic" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/tiles with aluminium anodised main 'T' section 25mm x 25mm x 1.50mm cross tee 25mm x 25mm x 1.50mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 6mm dia GI hooks and clamp and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces as in repair complete all as specified and as directed.
S&F Mild steel tubes 40 mm bore (Medium Graded) with all fittings & fixed to walls and ceiling for holding clamps of false ceiling as in repair complete all as specified and as directed.
S&F Powder coated anodised aluminium sliding fly proofing window, three tier (two shutter of glass and one shutter on wire mesh) without glazing bar, window shutter style shall be 40mm X 19mm, sheet thickness 1.5mm ,sliding channel 3mm thick channel width shall be as required with roller and frame (Chowkats) of window shall be 75mm X 60mm X 1.5mm thick section with or without rebate with 5.5mm thick tinted glass and galvanised wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm aluminum glazing clips fixed with rubber gasket locking arrangement as in repair complete all as specified and directed.
S&F Aluminium ventilator with powder coated anodized aluminium frame of section size 65.5 x 38.10 x 1.5 mm and Shutter with section 47.62mm x 44.5mm x 1.5mm thick half portion fixed with glass and half portion louvered including powder coated alunimium anodised “D” handle, hinges, peg stays, tower bolt etc including jointing cleats for fixing Builder hardware complete all as specified & directed.
S&F Floor door stopper of aluminium body and overall length of cover plate 150 mm and tongue anodised with hard drawn steel spring as in repair complete all as specified and directed.
S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.
S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples as in repair complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included in the BOQ
S&F Aluminium anodized, Barrel Tower Bolt 200mm long, Extruded Section and fixed, complete all as specified and as directed.
S&F Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed.
S&F 300mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed.
S&F Mild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed.
S&F Fancy type, Powder coated 20/25 mm dia of drapery rod fixed in position as in repair complete all as specified and as directed
S&F Bracket for fixing Fancy type,Chromium Plated 20mm dia curtain rod/ drapery rod etc as in repair complete all as specified and as directed.
S&F Aluminium body(extruded section) door closer hydraulically regulated, designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed as in repair complete all as specified and as directed.
S&F Drawer board knobs 20 mm dia of brass polished fixed with nut screw & washer etc as in repair complete all as specifeid and directed.
M&L Prelaminated Particle Board 19/20 mm thick, interior grade, double leaf pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with Screws to Timber Frame Work as in cup board shelf/shutter ,Pelmet Box or in narrow widths not exc. 15 Cm each, rebated or flat edged, properly sealed with 5 mm thick 2nd class hard wood beading fixed with water resistant adhesive except rebate side as in repair complete all as specified and as directed.
M&L Cement Concrete type C2(1:3:6) using 40mm graded crushed stone aggregate 75mm thick as in Plinth Protection/Path/Floor , etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Cement Concrete type B1(1:2:4) (20mm graded crushed stone aggregate) 40 mm thick as in hard standing, finishing Concrete Surfaces Even and fair without using Extra Cement, complete all as specified and as directed.
S&F Cat eye size 100mm X 90mm X18mm of poly carbonate lens working exclusively on micro prismatic lens type technology to be fixed with epoxy resin adhesive after cleaning the surface complete all as specified and as directed.
M&L Prepolished cement concrete chequered tiles of size 300 x 300 x 20 to 25 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in cement mortar 1:6 for laying floor finishes and including dismantling of chequered tiles . complete all as specified and directed.
M&L Coloured vitrified ceramic floor tiles10 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n. exc. 0.36 sqm (600mm x 600mm x 10mm) as in floor etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor make incl 15 mm thick screed bed or bedding of layers in CM 1:6 complete all as specified and as directed.
M&L Coloured vitrified ceramic floor tiles10 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n. exc. 0.36 sqm (600mm x 600mm x 10mm) on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.
M&L joint free coloured / digital ceramic floor tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed.
M&L Glazed Ceramic Coloured 450 x 350 x 7.0mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.
M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges,including dismantling of stone slabs and tiles of any description or thickness complete all as specified and as directed.
M&L Rendering 20mm thick in Cement Mortar on fair faces of brick work or concrete surface of wall in two layer, first layer 10 mm thick in cement morter (1:4) and top layer 10mm thick in cement morter (1:4) using water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and as directed. . (NOTE:-WPC shall be measured and paid separately)
M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed.
M&L Rendering 15mm thick in Cement Mortar 1:4 on other than fair faces of Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed.
M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc. finishing Plastered Surfaces Even and Smooth, without using Extra Cement. complete all as specified and as directed.
"Supply only" liquid water proofing compound (ISI marked) complete all as specified and directed. Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ CICO/ SIKA
M&L Preparing old decorated Plaster Surfaces of Ceiling and applying One Coat of White Wash (any colour/ tint) complete all as specified and as directed.
M&L Preparing old decorated plastered surfaces of Walls and applying One Coat of Cement Base Paint complete all as specified and as directed.
M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Based Paint over a coat of alkali resistant primer complete all as specified and as directed.
M&L Preparing new plastered surfaces of walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 3mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.
S&F Sheet Glass 3.0mm thick ordinary quality glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.
M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
Relaying/Re-fixing Galvanised Steel Tubing 15mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from dismantling here-in-before) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed.
Relaying/Re-fixing Galvanised Steel Tubing 20mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from dismantling item here-in-before) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed.
Relaying/Re-fixing Galvanised Steel Tubing 25mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from dismantling item here-in-before) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed.
S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 2000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.
S&F PVC (SWR) Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, ceilings and floors with pvc clamps complete all as specified and as directed.
S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, 32mm dia Chromium Plated bottle trap and 15mm dia PVC connector pipe, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. Make - Parryware Model No-C0406(SP)/34(CTH)
S&F 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections including taking down/out unserviceable one complete all as specified and as directed. Make : Cera cat part No CONGO B1010109/ Parryware Model No- C-8090 or equivalent model as specified in Particular Specification here in after.
S&F chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) as in repair complete all and specified and directed Make:- Essco (CAT No. ALE-ESS-583) or equivalent make specified in the particular specification
S&F Glass shelf assembly consisting of 5.5 mm thick sheet glass self 19-12 cm wide, 60 cm long with chromium plated brackets guard and railing fixed in position with necessary fixing arrangement as in repair complete all as specified and directed. Make:- Prayag or equivalent make as specified in Particular Specification here in after.
S&F PTMT Grating Doom of 100mm size (Min weight 25 grms) and fixed-in-repairs, complete all as specified and as directed.
S&F 125 mm dia brass chromium plated shower rose with or without swivels joint for fixing to 15 mm bore pipe etc complete including taking down old one complete all as specified and directed. Make:- Essco Cat pat No EOS-541N or equivalent make as specified in the particular specfication.
S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed. Make : Jaguar Cat Pt No. CON 167KNB or equivalent make as specified in the particular specfication.
S&F 3-in-1 wall mixer for Hot & Cold water supply with telephonic shower arrarengement, brass chromium plated fancy type, screwed down for 15mm bore iron pipe incl necessary fittings & fixtures etc.as in repair complete all as specified and directed. Make:- Jaguar Cat CON 281KN) or equivalent make as specified in the particular specfication.
S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed. Make - Parryware Model No-C0297,C8090 or equivalent make specified in the particular specification
S&F Chromium plated Bib taps for 15 mm bore of pipe incl necessary fittings & fixtures as in repair complete all as specified & directed Make : Essco (DLX-511 or equivalent make specified in the particular specification
S&F Two way bib cock 15 mm bore with flange cast copper alloy chromium plated fancy type screwed for iron pipe brass ferrule etc. incl necessary fittings & fixtures as in repair complete all as specified & directed Make : Essco Cat Pt No. DLX-512AN).or equivalent make specified in the particular specification
S&F Chromium Plated soap dish incl necessary fittings & fixtures as in repair complete all as specified & directed. (Make:- Jaguar CAN-1151N) or equivalent make specified in the particular specification.
S&F Toilet paper holder of brass chromium plated fixed to walls with chromium plated CP brass screw as in repair complete all as specified and directed. Make : Prayag or equivalent make specified in the particular specification
S&F Brass chromium plated fancy type stop cock screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures as in repair complete all as specified & directed. Make:- Essco Cat pat No DLX 513B or equivalent make as specified in the particular specfication.
S&F PVC bathroom cabinet (white) of size 430 x 330 x 100 mm (approx) with one single shutter and built in mirror in front of shutter, fixed on walls with wooden plugs and and chromium plated brass screw and cup washe as in repair complete all as specified & directed. Make -Prayag or equivalent make as specified in Particular Specification here in after.
S&F Chromium Plated tublar towel rail 600 mm long and 20 mm dia with bracket at both ends and fixed with chromium plated brass screw and wooden/plastic cleats as in repair complete all as specified and directed. Make : Essco/Prayag or equivalent make as specified in Particular specifications.
S&F 600 mm long CP towel rack with lower hanger including complete fittings and fixtures etc as in repair complete all as specified and directed. Make : Essco/Prayag or equivalent make as specified in Particular specifications.
S&F PVC connection pipe 15mm size with PTMT nuts of length 600mm long as in repair complete all as specified and directed. Make : Prayag (Cat No. 323) or equivalent make as specified in Particular specifications.
S&F 32 mm dia PVC waste pipe for WHB/Kitchen sink including all necessary fixing arrangement as in repair complete all as specified and as directed. Make:- Prayag Model -327 or equivalent make as specified in the particular specfication.
S&F Coloured (any) PVC seat cover, suitable for EWC (of any description) fixed with mild steel chromium plated hinges as in repair, complete all as specified and as directed. Make : Parryware, Cat No C 8071 or equivalent of Make Hindware
S&F Towel ring of size 150mm dia decorative type fixed with walls including necessary fittings etc as in repair complete all as specified and as directed. Make: Jaguar CAN-1121 BN or equivalent make as specified in the particular specfication.
S&F Glass corner shelf of single set with chromium plated brackets and CP railing including necessary fittings and fixture as in repair complete all as specified and as directed. Make:Prayag or equivalent make as specified in the particular specfication.
Taking down point wiring (light, fan, socket and power complete including fixtures and fittings such as switches ceiling roses, pendents , regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody for refixing or for taking credit (credit for above items should be made as per conditions separately) and making good distrubed surfaces of walls, floors, etc.complete all as directed by Engineer-in-Charge.
M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including fabricated 1.6 mm thick MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (ii) Cutting Chases pinning shall be measured and paid separately under relevant item of Sch A
All as per item No 112.00 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge.
All as per item No. 112.00 here-in-before but one 3 pin 5 amps switch socket outlet on the independent board with other switch complete all as specified and directed by Engineer-in-charge.
M&L Point wiring with 2.5 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC concealed conduit 20mm dia medium duty with all fittings and accessories of concealed (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 2.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point (including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting sockets for 5 pin, 16 Amp socket outlet on independent board complete all as specified and directed. Note: (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (ii) Cutting Chases pinning shall be measured and paid separately under relevant item of sch A
S&F Socket outlet 3/5 pin, 6 Amps, 240 volt flush type complete all as specified and as directed.
S&F Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230/240 volt flush type complete all as specified and as directed.
S&F Switch socket combination multipurpose 2 in 1, 3 pin 15 Amps and 5 amps 230/240 volt flush type complete all as specified and as directed.
S&F Switch piano, flush type, SP, one way, 5/6 Amps 230/240 Volts, white/ivory finish complete all as specified and directed.
S&F Ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed. .
S&F Ceiling fan regulator electronic Step type, solid state, , 240 volts, complete all as specified and as directed.
S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
Cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth with cement morter 1:3 complete all as specified and as directed.
Taking down existing tube light fittings of any make , capacity 1 x 20 Watt and refixing after minor repair in the same position or any other situation complete all as as directed by Engineer-in- charge.
Taking down existing tube light fittings of any make , capacity 1 x 10 Watt and refixing after minor repair in the same position or any other situation complete all as as directed by Engineer-in- charge.
S&F LED fittings with lamps of 30 watts for bldg security light IP 66 power Coated pressure die cast aluminium compact high power LED street light with compact size & rough design 32 mm GI Bend including taking down old unserviceable one complete all as specified and as directed. Make :- Crompton Cat No LSTS-30-CDL-M /Bajaj cat no-BCLST 30W LED/Havells Cat No-ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC.
Taking down unserviceable rusted / damaged MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed.
S&F MCB SPN DB made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail, 4 way with 200 amps rated bus bar, 240 volts complete all as specified and as directed. Make:- Schneider/ ABB/Legrand/ L&T/ C&S
S&F Sheet metal enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed. Make:- Schneider/ ABB/Legrand/ L&T/ C&S
S&F MCB TPN DB double door made up with sheet metal, phosphorised, power coated, neutral link, earth bar and din rail, 4 way TPN with 200 amps rated bus bar, 415 volts complete all as specified and as directed. Make:- Schneider/ ABB/Legrand/ L&T/ C&S
S&F MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve breaking capacity 10 kA complete all as specified and as directed. Make:- Schneider/ ABB/Legrand/ L&T/ C&S
S&F MCB DP 63 amps 240 volts 'C' curve breaking capacity 10 kA complete all as specified and as directed. Make:- Schneider/ ABB/Legrand/ L&T/ C&S
S&F Isolator 63 Amps, 415 Volts , 'Triple and neutral with rupturing capacity 10 kA complete all as specified and as directed. Make:- Schneider/ ABB/Legrand/ L&T/ C&S
Taking down old burnt/unserviceable submain wiring with aluminum/copper conductor PVC insulated cable of any size drawn through PVC casing caping/ PVC Conduit pipe including GI wire accessories etc. and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 4 Sqmm conductor as main wire and one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.
M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 6.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 6 Sqmm conductor as main wire and one run of 6 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.
M&L Painting of ceiling fan/wall mounted fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 32x6 as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed.
DNS CONSTRUCTION COMPANY
BHARUKA ENTERPRISES
BHASKAR SUPPLY AGENCY
UNIVERSAL TRADING CENTRE
MS AP CONSTRUTION AND CO
RADHA ENTERPRISE
KWALITY CONSTRUCTION
SK CONSTRUCTION SYNDICATE & ENGG CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .