DEFPROC

Active

Works

Electrical and Maintenance Works

REPAIR AND MAINTENANCE OF EXTERNAL ELECTRIC SUPPLY INCL CABLES, PANELS AND EARTHING UNDER GE NASIK ROAD CAMP

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

Garrison Engineer Nasik Road | Nashik, Maharashtra

Amount: ₹30 LCloses: 30 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published9 Oct 2026
Submission Opens23 Oct 2026
Closes30 Oct 2026
Bid Opening2 Nov 2026

Tender Value

₹30 L

EMD Value

₹60,000

Closing Date

30 Oct 2026, 6:00 pm

Tender Inviting Organisation

Name

Garrison Engineer Nasik Road

Address

Garrison Engineer Nasik Road AOP Complex Near AOP Gate PO Gandhinagar Nasik 422006

Work Description

As per tender documents

Tender Information

Tender ID

2026_MES_793096_1

Reference Number

GE/NRC/8855/E8

Tender Type

Open Tender

Product Category

Electrical and Maintenance Works

Form of Contract

Item Rate

Period of Work

120 days

Location

Garrison Engineer Nasik Road

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per NIT

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

Required1)Scanned Copy of enlistment letter in MES and GST Reg.No should be uploaded (.pdf)

Required2)Scanned copy of application on letter head of firm requesting issue of tender and EPF code number (.pdf)

Required3)Scanned copy of tender fees in form of DD for valid period of Rs.500 in favour of GE Nasik Road (.pdf)

Required4)For unenlisted contractors scanned copy of DOC meeting and DD for earnest money (.pdf)

Required5)Enlistment criteria of MES in class D category b (i) (.pdf)

Required6)For unenlisted firms Affidavit of NO recovery outstanding in any Govt Department (.pdf)

Required7)Scanned copy valid license holder from state Govt in their EST specified rule 45 of IE Rules 1956 (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

Garrison Engineer Nasik Road

EMD Fee Amount

₹60,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

9 Oct 2026

Published

9 Oct 2026

Bid Opening

2 Nov 2026

Download Starts

9 Oct 2026

Download Ends

30 Oct 2026

Submission Starts

23 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (24 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed.	120	CUM	-	-
2	Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.	100	CUM	-	-
3	Removal of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.	20	CUM	-	-
4	Disconnecting & taking out cable LT 1100V grade any size complete all as specified.	495	RM	-	-
5	S&F and lay in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 3.5 core 500 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, armoured with galvanised steel strip and overall sheathed including cable gland, lugs, jointing material etc, jointing, connecting, testing and commissioning all as specified and directed.	245	RM	-	-
6	All as per Ser item No 5.00 here in before but 3.5 Core 50 Sqmm	250	RM	-	-
7	M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 110 mm and inner dia 95mm including 90 degree bends with coupler and rubber ring laid in trenches for cable protection of size 500 sqmm cable complete all as specified and directed.	230	RM	-	-
8	M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50 mm and inner dia 38 mm including 90 degree bends with coupler and rubber ring laid in trenches for cable protection of size 50 sqmm cable complete all as specified and directed.	235	EACH	-	-
9	Supply, fix, test and commissioning in repair of cable jointing kit of size from 16 sqmm to 50 sqmm 3.5 or 4 core, heat shrinkable 1100 Volts, XLPE straight through joints complete all as specified and directed.	20	EACH	-	-
10	Supply, install, test and commissioning in repair outdoor type cubical panel board suitable for 3 phase 4 wire 415 Volt, 50 Hz and type tested at CPRI at 415 Volt factory fabricated in an approved factory having modern fabrication process powder coated in approved shard having thickness not less than 100 mircrons provided with suitable gasket to make it dust /vermin proof and general construction confirming to IS 8623793 comprising of the following :- Outer shell: The outer shell shall be made out of 3.15mm thick CRCA Sheet and MS angle section 50x50x6mm frame, factory fabricated with front and back openable double door system locable / openable by keys from both side having chromium plated 19 mm dia fancy lock, louvers and air vent gasket for natural flow of air. The bottom of the outer shell contains a ditachable plate having provn for entry of armoured cable of adequate size with glands. The dimension of the shell should be adequate to accomodate inner shell described below giving minimum 75 mm space all round. Provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the panel safely shall be made. The degree of protection of outer shell shall be IP-54.	1	EACH	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

8855PS.pdf

Tender Documents • 0.28 MB

BOQ_889380.xls

BOQ • 0.31 MB

8855SOC.pdf

Additional Documents • 0.27 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed.

120

CUM

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

100

CUM

Removal of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

CUM

Disconnecting & taking out cable LT 1100V grade any size complete all as specified.

495

S&F and lay in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 3.5 core 500 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, armoured with galvanised steel strip and overall sheathed including cable gland, lugs, jointing material etc, jointing, connecting, testing and commissioning all as specified and directed.

245

All as per Ser item No 5.00 here in before but 3.5 Core 50 Sqmm

250

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 110 mm and inner dia 95mm including 90 degree bends with coupler and rubber ring laid in trenches for cable protection of size 500 sqmm cable complete all as specified and directed.

230

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50 mm and inner dia 38 mm including 90 degree bends with coupler and rubber ring laid in trenches for cable protection of size 50 sqmm cable complete all as specified and directed.

235

EACH

Supply, fix, test and commissioning in repair of cable jointing kit of size from 16 sqmm to 50 sqmm 3.5 or 4 core, heat shrinkable 1100 Volts, XLPE straight through joints complete all as specified and directed.

EACH

Supply, install, test and commissioning in repair outdoor type cubical panel board suitable for 3 phase 4 wire 415 Volt, 50 Hz and type tested at CPRI at 415 Volt factory fabricated in an approved factory having modern fabrication process powder coated in approved shard having thickness not less than 100 mircrons provided with suitable gasket to make it dust /vermin proof and general construction confirming to IS 8623793 comprising of the following :- Outer shell: The outer shell shall be made out of 3.15mm thick CRCA Sheet and MS angle section 50x50x6mm frame, factory fabricated with front and back openable double door system locable / openable by keys from both side having chromium plated 19 mm dia fancy lock, louvers and air vent gasket for natural flow of air. The bottom of the outer shell contains a ditachable plate having provn for entry of armoured cable of adequate size with glands. The dimension of the shell should be adequate to accomodate inner shell described below giving minimum 75 mm space all round. Provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the panel safely shall be made. The degree of protection of outer shell shall be IP-54.

EACH