Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.9 LAccepted-AOC | L1 | Accepted-AOC LOWER BID VALUE | |
| 2 | L2₹7.1 L+₹18,846.22 (2.72%)Rejected-Finance | L2 | Rejected-Finance HIGHER BID VALUE | |
| 3 | L3₹7.2 L+₹23,696.35 (3.43%)Rejected-Finance | L3 | Rejected-Finance HIGHER BID VALUE | |
| 4 | Rejected-Technical | - | Rejected-Technical Disqualified |
Tender Value
₹6.9 L
EMD Value
₹13,858
Closing Date
17 Aug 2026, 4:00 pmClosed
EXECUTIVE ENGINEER
UTTAR DINAJPUR HIGHWAY DIVISION PW ROADS DIRECTORATE TULSHITALA RAIGANJ UTTAR DINAJPUR
Road Safety Work and Traffic Calming Measure at Islampur New Bus Terminus Chowrangee More and Ashrampara More of Islampur Main Town Road Old NH31 under Uttar Dinajpur Highway Division in the District of Uttar Dinajpur
2026_WBPWD_5017844_1
EE/UDHD/WB/PWRD/NIT_04 of 2026_27
Open Tender
CIVIL WORKS
Percentage
21 days
RAIGANJ
Please refer Tender documents.
4 documents required · 4 mandatory
₹13,858
Yes
CHAMBER OF EXECUTIVE ENGINEER
1 Sept 2026
3 Aug 2026
19 Aug 2026
4 Aug 2026
17 Aug 2026
7 Aug 2026
7 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying and installation of delineators (road way indicators, hazardmarkers,objectmarkers),80 100 cm high above ground level, painted black andwhite in 15 cm widestrips, fitted with 80x100mm rectangular or 75mmdia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings (Reference to MORT&H's specification 806). | 120 | Each | 877.47 | ₹1,05,296.4 |
| 2 | Median Marker
Made up of tough, impact resistant thermoplastic body, reflectorized on both side using approximate. 85 x 85 mm (for square shape or equivalent in case of round shape Fluorescent yellow prismatic sheeting (type-XI) reflective surface should be incline to approximate 20 degree to vertical to provide maximum reflective. Height & width of median marker shall be approximate by 110 mm complete with all fixing arrangements. | 50 | Each | 531.61 | ₹26,580.5 |
| 3 | Supplying &fixing ofHazardMarkersofsize:30cmX90cmasperIRC:79-1981(Theaboveis inclusive of vertical post) | 6 | Each | 4,399.56 | ₹26,397.36 |
| 4 | Solar Powered Road Studs
Providing and fixing of solar powered road studs rectangular/circuler shape (with super bright LEDs for long visibility from distance greater than 800m) having twin shank and body made of alluminium alloy or polycarbonate material which shall be absolutely weather resistant and strong enough to support a land of 13635 kg tested in accordance with ASTM-D 4280 and water resistance as per IP65 in reference with IS 12063:1987,fixed to the road surface using addhesives and the procedure recomended by manufacturer as per clause no 804.6 and 804.7 of MoRT&Hs's specification. | 86 | Each | 2,638.51 | ₹2,26,911.86 |
| 5 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mmis exclusiveof surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes (Reference toMORT&H's specification 803) | 199.5 | Sqm | 622.79 | ₹1,24,246.61 |
| 6 | Rumble Strips
Provision of 15 No.s rumble strips covered with premix bituminous carpet, 15-20mmhigh at center, 250mmwideplacedat1mcenter to center at approved locations to control speed, marked with white strips of road marking paint | 157.5 | Sqm | 295.32 | ₹46,512.9 |
| 7 | Reflective Pavement Marker with Shank
Providing and fixing of single mould twin shanked moulded road markers/ road studs made of poly carbonate or ABS body and shall support a load of 13635 kg tested in accordance to ASTM D4280 and complying with specifications as per clause 804 of MoRT&Hs 5th revision and section 5 of IRC-35:2015, the reflecting panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lenses face. The slope of retro reflecting surface should be 25 +/-5 degree to base. The reflective marker shall be fixed on the road surface using the epoxy/adhesive and the procedure recommended by the manufacturer. No nails shall be used to affix the markers so that they do not pose safety hazard on the road | 72 | Each | 433.85 | ₹31,237.2 |
| 12 | Add GST @ 18% | - | % | 18 | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.69 MB
2911NEW.pdf
Tender Documents • 0.29 MB
BOQ_5088299.xls
BOQ • 0.28 MB
DateCorri04.pdf
PDF • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .