Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.2 LAccepted-AOC AT ROAD MES TINALI PO CHABUA DISTT DIBRUGARH ASSAM 84 | CHABUA | DIBRUGARH | ASSAM | 786102 | L1 | Accepted-AOC Accepted beingL1 | |
| 2 | L2₹48.4 L+₹6.2 L (14.8%)Rejected-Finance | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹48.5 L+₹6.3 L (15.0%)Rejected-Finance | L3 | Rejected-Finance Rejected being L3 |
Tender Value
₹41.1 L
EMD Value
₹82,200
Closing Date
23 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) CHABUA
GE (AF) CHABUA, POST-CHABUA AIR FIELD, DIST-DIBRUGARH, ASSAM-786102
PROVISION OF INFRASTRUCTURE FOR INSTALLATIONS OF IPSS MONITORING SYSTEM AT AF STATION CHABUA UNDER GE(AF) CHABUA
2023_MES_629783_1
535/E8
Open Tender
Civil Works
Item Rate
180 days
GE(AF) CHABUA
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE(AF) CHABUA
₹82,200
Yes
16 Feb 2024
24 Nov 2023
25 Dec 2023
24 Nov 2023
23 Dec 2023
9 Dec 2023
24 Nov 2023 - 1 Dec 2023
Amount
SCH 'A' PART-I
Surface excavation nexc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Removing excavated material/surplus soil to a distance not exceeding 50m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Excavation in trenches, in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, or for shafts, wells, manholes, pier holes, cable laying, sewage/water lines etc complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for TMT bar 10mm dia and over cut to length bent to shape required including cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.
All as per item No. 7 here-in-before but 6mm to 8mm dia complete all as specified and directed.
All as per item No. 7 here-in-before, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter to rough finished of concrete surfaces complete all as specified and directed.
M&L for formwork to rough finished flat surfaces of pillars, posts, struts, piers, columns and stanchions of any shape etc complete all as specified and directed.
M&L for formwork to chajja, roof beams, lintels and soffits of roof projections etc and similar items including edges to fair finished concrete surfaces complete all as specified and directed.
M&L for formwork to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs and landing and similar works complete all as specified and directed.
M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete all as specified and directed.
M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for columns, pillars, piers, posts and struts etc complete all as specified and directed.
M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for roof beams and lintels complete all as specified and directed.
M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for slabs supported on walls, landings and like etc complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 over fair faces of brick/concrete wall surfaces and finishing even and fair complete all as specified and directed.
All as per item No. 18 here-in-before but in CM 1:4 for external wall surfaces and finishing even and fair complete all as specified and directed.
All as per item No. 18 here-in-before but 10mm thick in CM 1:3 as in ceiling finished even and smooth using extra cement complete all as specified and directed.
S&F fixing louvered type glass ventilators using 5mm thick frosted glass strips including aluminium powder coated frame and rubber beading etc complete all as specified and directed.
S&F Factory made wood grain printed solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 gauge complete all as specified and directed.
S&F 150 mm anodised aluminium handles cast type complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed.
S&F butt hinges 100mm, stainless steel complete all as specified and directed.
S&F 30mm thick Flush shutters, Solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.
S&F 125mmX60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling chowkats with PCC 1:2:4 type B-0 (using 12.5mm graded aggregates)complete all as specified and as directed.
S&F 105mmX60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling chowkats with PCC 1:2:4 type B-0 (using 12.5mm graded aggregates)complete all as specified and as directed.
S&F framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290, Gde-E-165 complete all as specified and as directed.
S&F 35mm thick Glazed skeleton door shutters, open rebated and prepared to receive glass, Gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using IInd Class Hard wood complete all as specified and as directed.
S&F galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
S&F 300mm long aluminium anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and as directed.
S&F anodised aluminum grill with mesh 75 mm and aluminum bar 6 mm XPM type alongwith stainless steel wire including all accessories in window frame complete all as specified and as directed.
S&F anodised aluminum frame for doors, windows, ventilators with one or more rebates including fitting cleats for fixing etc complete all as specified and as directed.
S&F anodized aluminum window and ventilator shutters, fixed type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws etc. including 4.0mm thick tinted glass complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and as directed.
M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F three track sliding window with two shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using aluminium anodised sections for (a) Bottom frame - minimum weight 1.065 Kg/m (b) Top frame & vertical - minimum weight 0.929 Kg/m (c) Shutter - minimum 0.456 Kg/m including suitable size handles and lock, etc complete all as specified and as directed.
M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
All as per item No. 41 here-in-before but in skirting over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for coloured designer glazed ceramic tiles of size 300x600x7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for machine cut kota stone slab flooring 16-20 mm thick over cement concrete screed base laid and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing, complete over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for kota stone slab 16-20 mm thick in riser of steps, skirtings, dado and pillar laid over cement concrete screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick screed bed in CM (1:4) complete all as specified and directed.
M&L for broken stone hardcore of gauge nexc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in floor subbase complete all as specified and directed.
M&L for 25 mm thick levelling course in cement concrete type B-1 (1:2:4) using 20mm graded aggregate complete all as specified and directed.
M&L for 50mm thick cement concrete type C2 (1:3:6) using 40mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of OBD of approved tint and pattern over one coat of primer over a coat of 2mm thick wall care putty on wall complete all as specified and directed.
M&L for preparation newly plastered surfaces of ceiling including chajjas etc and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.
S & F Rotational moulded polyethylene water storage tanks 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S&F 20mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F 15mm bore galvanised steel tubing, medium grade laid in trenches/walls/roofs/ floors including all fittings and necessary cutting of chases for concealed portion etc complete all as specified and directed.
S&F 20mm bore galvanised steel tubing, medium grade laid in trenches/walls/roofs/ floors including all fittings and necessary cutting of chases for concealed portion etc complete all as specified and directed.
S&F 15 mm dia bore bib taps cast copper alloy with, capstan head, CP long body fancy type screwed down for iron pipe 15mm dia complete all as specified and as directed.
S&F 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.
S&F 15 mm dia bore fancy type pillar taps, cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with capstan head, screwed for iron pipes or for union and fixed, complete all as specified and as directed.
S&F water closet vitreous china pedestal pattern, white with including PVC 'P' or 'S' trap and connection to trap including cement concrete, with and including PVC valveless, syphonic action type flushing cistern, low level, white including brackets and including flush pipe of polyethylene or low or high density or PVC 32mm dia, for low level cistern, seat cover and health faucet jet spray including making good to floor, complete all as specified and as directed.
S&F vitreous china wash hand basin, (white), flat back of size 550x400 mm with and including two CI brackets, brass chromium plated complete all as specified and as directed.
S&F brass chromium plated waste coupling 32mm dia including flush pipe for wash basin complete all as specified and as directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in basin platform and urinal partition inclusive of cutting chases/holes if ordered as counter of wash basin platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L for machine cut kadappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as supports of granite counter / platforms inclusive of grinding of exposed edges complete all as specified and as directed.
S&F PVC connections 15mm size with Brass nuts of length 450mm complete all as specified and as directed.
S&F Waste pipe any dia (32/40mm) 1.5 mtr long complete all as specified and as directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls complete all as specified and as directed.
S&F 110mm PVC (SWR) (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and as directed.
S&F 75mm PVC (SWR) (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and as directed.
S&F 110mm PVC (SWR) reducer complete all as specified and as directed.
S&F 110mm bore PVC (SWR) branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
S&F PVC (SWR) Nahani trap 75mm bore with SS grating with or without holes including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.
S&F PVC (SWR) gully trap 125/110 square or round mouthed, type P including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.
S&F PVC (SWR) vent cowl 75/110mm dia as required complete all as specified and as directed.
S&F 110mm bore PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and as directed.
S&F PVC (SWR) Coupler 75/110 mm dia complete all as specified and as directed.
M&L providing cement concrete (1:2:4) B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.
M&L water proofing treatment to RCC roof slab, shall be carried out as specified below and as directed by Engineer-in-Charge:- (a) Applying 10mm hick plaster screed bed layer in CM 1:3 on concrete surfaces after preparation of surfaces. (b) Preparing plastered surfaces by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20kg/Sqm of area. (c) Laying App polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 kg/Sqm and 3mm thick with laps & overlaps as specified & joints sealed and applied complete by torch application method. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of engineer-in-charge. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed.
M&L for 100 mm thick PCC 1:4:8 type B-1 using 20mm graded crushed stone aggregate as in path for interlocking tile complete all as specified and as directed.
M&L for Sand filling under floors or in foundations in-cluding watering and consolidation for laying interlocking tiles complete all as specified and as directed.
M&L for 80mm thick rubber moulded coloured glossy finish precast cement concrete interlocking pavers blocks/tiles Grade M-40 made with grey cement and pigment manufactured by automatic hydraulic compression with high compressive strength, any size, pattern and shape, laid dry in patterns with different colour paver block/tiles as in path, as directed by engineer-in-charge complete all as specified.
Excavating over areas n.exc 1.5m deep and getting out in soft / loose soil complete all as specified and as directed.
All as per item No. 85 here-in-before but depth exceeding 1.5m but not exc 3.0m complete all as specified and as directed.
M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and as directed.
M&L for reinforced cement concrete nominal mix type B0 1:2:4 (using 12.5mm graded aggregate) for slabs supported on walls, landings and like etc complete all as specified and as directed.
M&L for precast cement concrete type B1, 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes, baffle wall of septic tank and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork complete all as specified and as directed.
M&L for 50mm thick cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in floor of septic tank finishing surface even and smooth without using extra cement etc complete all as specified and as directed.
M&L for construction of Soakage wells of size 1.2M dia x 3M effective depth with excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 40-63mm complete all as specified and directed.
M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed complete all as specified and as directed.
SCH 'A' PART-II
M&L for point wiring complete with PVC insulated unsheathed FRLS-H multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sqmm single core green colour earth wire and connecting to earth dolly including colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 2009 with provision of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing including cutting chases for one 5 amps switch socket combination on independent board complete all as specified and as directed.
All as per item No 93 here-in-before but one three pin 5 Amp socket outlet point on independent board controlled by one no, one way switch complete all as specified and as directed.
All as per item No 93 above but point wiring with 4.0 sq mm single core FRLS-H cables and earth continuity wire with 4.0 Sqmm single core cable for one 3 pin 15 Amps socket out let point controlled by one no, one way switch on independent board for power point complete all as specified and as directed.
S&F Modular switch piano flush type, single pole, one way, 6 Amp 230 volts complete all as specified and as directed.
S&F Modular switch piano flush type, single pole, one way, 16 Amp 230 volts complete all as specified and as directed.
S&F Modular flush type socket outlet multipurpose 3 pin 6 Amp flush type 230 volts AC complete all as specified and directed.
S&F Modular flush type socket outlet multipurpose 3 pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.
S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.
S&F ceiling rose surface bakelite 65mmx50mm, 3 terminals with back plate etc complete all as specified and directed.
S&F ceiling fan regulator electronic step type of suitable wattage 230V suitable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed.
S&F modular cover plate with frame, 2 module complete all as specified and directed.
S&F modular cover plate with frame, 3 module complete all as specified and as directed.
S&F modular cover plate with frame, 4 module complete all as specified and as directed.
S&F modular cover plate with frame, 6 module complete all as specified and as directed.
S&F modular metal flush box 1/2 module complete all as specified and as directed.
S&F modular metal flush box 3 module complete all as specified and as directed.
S&F modular metal flush box 4 module complete all as specified and as directed.
S&F modular metal flush box 6 module complete all as specified and as directed.
Supply and fix LED bulb of capacity 10 W complete all as specified and as directed.
Supply & Fixing LED light Fitting 1x18W, regal batten for LED including ultra bright glass LED tube light with single/double side connection complete all as specified and as directed.
S&F Sheet metal enclosure distribution board SP&N, 8 way, double door powder coated, protection class IP-42 suitable for mounting MCB, DBs confirming to IS-13032, IS-8632, BS5484 with min 200 Amp rating copper bus bar complete all as specified and directed.
S&F Sheet metal enclosure distribution board VTPN, 8 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB, DBs confirming to IS-13032, IS-8632, BS5484 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with pcc works complete all as specified and directed.
Supply and fixing MCBs SP 6 to 32Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and as directed.
Supply and fixing MCBs SPN 32 Amps to 63 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and as directed.
Supply and fixing MCCBs Four Pole 63 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and as directed.
M&L for earthing complete with galvanized mild steel earth electrode plate 600 X 600 X 6 mm thick buried directly and vertically in ground connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm bore medium grade pipe with all fittings from the earth electrode fixed along pole or wall with and including 25 x 6mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from top of the earth pit to top of earth plate electrode including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle, charcoal/salt, funnel, CI frame etc complete all as directed. NOTES:- (i) The concrete pit shall be made in PCC 1:2:4 type B-0, using 12.5 mm graded crushed stone aggregate 40mm thick precast cover slab of RCC (1:2:4), type B-1, using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover (ii) Item includes the cost of 7.5 metre GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order (iii) Items includes cost of 7.5 metre earth lead wire. Any variation in length shall be adjusted through deviation order. (iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides.
Supply and fixing steel body exhaust fans 250 mm sweep, 230/240 volts, AC single phase with louver complete all as specified and as directed.
S&F 1200mm sweep BLDC 5 star ceiling fan with anti suicide fan rod, regulator enable motor power input 27 Watt with 10% tolerance, motor insulation B type, 230-240 V, 50 Hz AC supply complete set 3 blade, canopy, shackle including nut, bolts & washers as required complete all as specified and as directed.
Supply and draw submain wiring with two single core 6.0 Sqmm FR PVC insulated copper cable 1100 volts grade multistrand, unsheathed conductor drawn into PVC concealed conduit of 20mm dia including all necessary fittings including 6.0 sqmm multi strand FR PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete all as specified and directed.
Supply & fixing of Bldg security light fitting LED 40 W, pressure die cast housing epoxy powder coating IP -65, connected with and including 0.5 Sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 mtr length and fixed with MS clamps of size 40x5 mm-02 Nos, nuts, bolts and washers on wall complete all as specified and directed.
M&L for PVC concealed conduit pipe 20 mm dia medium grade ISI Marked (For AFNET Wire) complete all as specified and directed.
Supply and install hi wall 1.5 Ton split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER above 3.3 complete all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.
Supply and fixing sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one SP MCB of 20 Amp rating 240 Volt for AC complete all as specified and directed.
Supply, laying and testing galvanised iron pipes of 50mm bore medium grade with ISI Marked with all necessary fittings (such as bends, elbows, tees, short pieces of medium grade pipe, connectors, back-nuts, caps, plugs and unions etc) laying in trenches/floors/ducts and also cutting pipes, screwing, and for making forged bends on piping as required, complete all as specified and as directed.
All as per item No. 127 here-in-before but 25 mm bore complete all as specified and as directed.
M&L for cutting of existing CI/GI pipe line for insertion of tee and tail piece and jointing material complete all as specified and as directed.
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm dia pipe complete all as specified and as directed.
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 50 mm dia pipe complete all as specified and as directed.
Construction of brick masonry valve pit/chamber of internal dimension 60 cm x 60 cm x 60 cm depth with sub class 'B' old size bricks in CM (1:4) and 10 mm thick plastering in CM (1:4), PCC (1:4:8) type D2 (Using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping MS frame with 40 x 40 x 6 mm angle iron 3 mm thick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary breaking of the existing old chamber, excavation in soft loose, soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m, complete all as specified and as directed.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed.
Material and labour for sand cushioning (dry) in trenches for protection of UG cable (below, above and around the UG cable laid in trenches) of 230mm spread thickness and consolidated (punned) up to 180mm thickness complete all as specified and directed. Note:- Punned thickness shall be measured for payment.
Materials and labour for brick work with Sub Class 'B' bricks well burnt laid breadth wise along the length or cable laid in trenches over sand cushion laid for UG cable protection complete all as specified and directed.
Material & labour for 50 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed.
M & L for maintenance free chemical earthing system complete with 03 (three) nos copper bonded rods, 17.2 mm dia 3000 mm long electrode buried at suitable distance apart directly in ground, to bore holes of 120 mm dia vertically to a depth not less than 3.60 mtr deep below ground level with top edge of earth electrode at a depth not less than 100 mm below normal ground level, provision of clamps or brazed or both for each copper bonded rods made of copper and copper strip of size 25 x 3 mm & strip connection on the top of the electrode and copper strip of size 25 x 3 mm for inter connection of 03 nos copper bonded rods and laying at least 500 mm below in the ground and further connected to test point terminal block, including back filling of bore holes with advanced earth enhancing compound 96 kilogram (minimum) for artificial treatment to soil so as to achieve earth resistance below 01 Ohms as specified in para 19.140 of SSR Part-1 (2009), including provision of earthing pit in PCC(1:3:6) type C1 pre-cast cover RCC slab of size 400 x 400 x 50 mm with one handle made out of 8 mm dia round bar, including necessary earth work and three coats of white wash on plastered surface (exposed surfaces) and testing complete all as directed and including necessary earth work and testing complete all as specified and directed.
M&L Test point terminal block made of copper size 75mmx75mmx26mm, drilled and screwed including 4 Nos 8mm dia 25mm long hexagonal head brass screws including box of size 90x90x90mm made of 1.6mm plain sheet painted with two coats of synthetic enamel paint over a coat of red oxide primer and screwed to wall for protection of test point complete all as specified.
S&F GI tube light grade 40mm dia with all fitting and laid in floors, under road, pavement or hard standing for protection of earthing strip complete all as specified and directed.
Supply and fixing copper strip of size 32x6 mm with saddles with required porcelain insulator, fixing screws etc for roof conductors and down conductors complete all as specified and directed.
M&L for GI mast 6mtr long 50mm dia fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) base with suitable depth as per site requirement complete all as specified and directed.
M&L for lighting strike recorder as per manufacture's instructions complete all as specified and directed.
M&L for single PVC insulated core copper cable of size 70 Sqmm with lugs complete all as specified and directed.
KP GHOSH AND CO
Chief Builders &Consultants
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .