Construction of Kitchen / Store

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :

P/L dry Stone Soling duly hand packed & consolidated with hand rammers incl .all carriage and head load complete Job

Providing and laying in position cement concrete of 1:3:6 ratio excl cost of centering shuttering and carraige all work in foundation using coarse sand and 40 mm nominal size aggregates including carriage of materials and head load complete job.

Providing and laying in position cement concrete of 1:2:4 ratio excl cost of centering shuttering and carraige all work in foundation using coarse sand and 20 mm nominal size aggregates including carriage of materials and head load complete job.

Centering and shuttering i/c strutting propping etc and remaval of formwork complete job

Providing and laying factory made chamfered edge Cement Concrete interlocked paver blocks in footpath, parks, lawns,etc, of required strength, thickness & size/ shape, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all . 60mm thick interlocked cement concrete paver block with approved colour, design & pattern and head load Complete job finished work to me measured.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing Colour coated 0.5mm high rib sheets (size, shape and pitch of corrugation as approved by Engineerin-Charge) 0.50mm+/- 5% total coated thickness (TCT), with EPDM seal or with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces

Providing and fixing of color coated 0.25 mm on sides including all necessary fittings complete job.

Providing and fixing of waterproof plyboard Solid 19mm incld framework and. all necessary fittings

Providing and fixing of waterproof PVC sheets over floor

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with dry distemper/emulsion paint of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White

Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste coupling of standard pattern,including suitable Pedestal, PVC connections to basin mixer, painting of fittings and brackets, cutting and making good the walls wherever required. (Jaquar or Equivalent as Per MakeList) incl.pedestal White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, Rectangular shape 453x357 mm

Providing and fixing C.P brass bib cock of approved quality. (Jaquar or Equivalent as Per Make List), 15mm nominal bore

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm

Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes plain bends, door bends, sockets, rubber ring, jointing, junctions, clean out plug , cowls, reducers, offsets, collar, M.S holder-bat clamps, access pieces, floor traps i/c steel grating, trap of self cleansing design .etc. complete including jointing.

Providing and fixing C.P. brass angle valve for basin mixer and geyser/cistern points. (Jaquar or Equivalent as Per Make List), 15mm nominal bore

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

Constructing brick masonry chamber/manhole with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame & hinges (light duty) 455x610 mm internal dimensions i/c padlock arrangement, fixed in 1:1.5:3 mix,, inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete incld manhole cover etc. complete as per standard design :

Providing and fixing of geysers of approved make and brand (jaquar, Racold, AO Smith, venus) incl all fixtures compete job 50 Litre

Providing and fixing of washbasin vanity cabinet with ceremic sink water resistant HDHMR wood material complete job

Providing and fixing of Exhaust fans Plastic (300x300)mm of approved brand and quality including necessray fittings job.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels incld.edge moulding Granite of any colour or shade (Area of slab upto 0.5 sqm)

P/fixing of wardrobe type almirah using 19mm plyboards including shutters with dunmica on inner sides and 10mm plyboard on back side including all necessary fittings steel hings,handles,catchers, locks (2'-0" Deep) complete job.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade.

Removing old Paint and Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers' specifications: 13.57.2 Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10som over an under coat of primer applied @ 0.75 tre/10sqm of approved brand and manufacture

French spirit polishing, Two or more coats on new works including a coat of wood filler

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Washed stone grit plaster on exterior walls of height upto 10 m above ground level in two layers, under layer 12 mm cement plaster 1:4 (1cement : 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2kg of cement per m2, top layer 15mm cement plaster 1:1/2 :2 (1 cement: 1/2 coarse sand : 2 stone chippings 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in -charge (payment for providing grooves shall be made separately).

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per archetectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners. Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and Fixing Two Feet deep aluminium almirah with aluminium shelfs, sides,back and 6 mm thick glass fixed in doors incld all fittings and fixtures complete job

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm

Dismantling tile work in floors/walls and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10 mm to 25 mm

12 mm thick cement plaster of 1:6 mix ( 1 cement: 6 coarse sand)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (Jaquar or Equivalent as per Make List)

Providing and fixing C.P / Stainless steel anti cockroach trap (grating) on floor traps and floor drains with cement mortar, complete in all respects -100mm dia

Providing and fixing P.V.C floor trap 100mm dia including cost of cutting and making good the walls and floors wherever required.

Clearance of septic tank/soakage pits including removal of unhygenic material and disposal of the same outside municipal limits by engaging mechanical sucker or as directed by engineer in-charge.

Providing and fixing of the following PVC fittings. (Prince/Finolex/Jindal make) Door bend/DoorTee/Plain Bend/Reducer 75 /100mm

Providing and fixing of Electric Kitchen Chimney

Add provision for electrification

ARSHAD HUSSAIN BHAT (BID ID -2356561)

SAYAR AHMAD BHAT (BID ID -2356943)

MOHAMMAD YASEEN SHAH (BID ID -2357083)

MR. MOHAMMAD ABASS PARRAY (BID ID -2356745)

FAIROZ AHMAD LONE (BID ID -2357048)

GH AHMAD TANTRAY (BID ID -2356584)

Umar Ali Misger (BID ID -2357330)

Bilal Ahmad (BID ID -2357411)

MUDASIR AHMAD DAR (BID ID -2357119)

ISOK INFRATECH (BID ID -2357043)

muzaffar ahmad malik (BID ID -2356797)