Loading…
Loading…
Tender Value
₹27.3 Cr
EMD Value
₹27.4 L
Closing Date
12 Dec 2025, 9:30 pmClosed
Karnataka Housing Board
Development of Sites & services (Sy. No. 5 and others) at Lingapura village, Kasaba Hobli, Anekal taluk, Bengaluru Urban district in an extent of 36 Acres 15 Guntas
245786
KHB/2025-26/OW/WORK_INDENT665
Open
Other Works
KHB Central Office Bengaluru
₹7,500
₹27.4 L
5 Dec 2025
5 Dec 2025
15 Dec 2025
8 Dec 2025
9 Dec 2025
Development of Sites & services (Sy. No. 5 and others) at Lingapura village, Kasaba Hobli, Anekal taluk, Bengaluru Urban district in an extent of 36 Acres 15 Guntas
SITE CLEARANCE, LEVELLING Clearing and grubbing road land including uprooting rank
vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and ...
Cutting of Trees, excluding removal of stumps and roots of trees Girth from 300 to 600mm
Removal of stumps and roots including backfilling with suitable material to required compaction Girth from 300 to 600mm
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per d...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Boundry Pillar:- Reinforced cement concrete M15 grade boundary pillars ofstandard design as per IRC:25, fixed in position including finishing and lettering but excluding painting
informatory name board Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all k...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Printing new letter and figures of any shade with synthetic
enamel paint black or any other approved colour to give an
Roads Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing ...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...
Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including
cleaning of road surface and spraying primer at the rate of 0....
Bituminous Macadam Grading - for traffic Less than20 MSA Providing and laying Bituminous Macadam with 120
capacity hot mix plant batch type using crushed aggregates of specified grading premixed with ...
Tack coat on Bituminous surface
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Existing Village Road Widen to 15m Wide Road Clearing and grubbing road land including uprooting rank
vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of tr...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by y Mechanical Means using Hydraulic excavator with in all lifts and lead
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...
Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including
cleaning of road surface and spraying primer at the rate of 0....
Bituminous acadam Grading - for traffic Less than20 MSA Providing and laying Bituminous Macadam with 120
capacity hot mix plant batch type using crushed aggregates of specified grading premixed with b...
Tack coat on Bituminous surface
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
ROAD SIDE DRAIN WORKS Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
RCC CULVERTS Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
RCC Box Culvert Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barrica...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Raising Main from Bore well to GLSR Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, constructi...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 65mm dia nominal bore
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments Size 63 mm
External Electrification Works (Bore well) Main Panel - Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat di...
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped wit...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with therm...
Supplying,fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based,digital readout of percentage leakage curren...
Supplying …..amps rated 3phase with netural bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/FRP/DMC insulator which...
Supplying, fixing and wiring 50/5A to 400/5A 5VA Burden Current Transformer.Class 0.5 accuracy with tape Wound. a)Group A
Supplying of multi function digital meter with three line back light LCD type display for voltage,Current,frequency,Power, Powerfactor,KVA,KWH,KVAR suitable for 3 Phase,4 wire LT network with IP 54 de...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C.50 Hz 12/24v D.C. a)Group A
Supplying and Fixing of Shunt trip suitable for MCCB. CBCT
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with short circuit breaking capa...
Supplying and fixing angle iron frame work fabricated out of M.S angle iron… and M.S flat …. with bolts ,Washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 4...
Supplying and fixing angle iron frame work fabricated out of M.S angle iron… and M.S flat …. with bolts ,Washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Supplying fully automatic star -dealt starter unit push button type with suitable wires 3 contactors one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with short circuit breaking capa...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with short circuit breaking capa...
Supplying,fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation,relays LED display,self programming function for power stages and oper...
Supplying and fixing angle iron frame work fabricated out of M.S angle iron… and M.S flat …. with bolts ,Washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 4...
Supplying and fixing angle iron frame work fabricated out of M.S angle iron… and M.S flat …. with bolts ,Washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C.50 Hz 12/24v D.C. a)Group A
Supplying,fixing and wiring 3 Phase Digital Ammeter/Voltmeter
Supplying, fixing and wiring 50/5A to 400/5A 5VA Burden Current Transformer.Class 0.5 accuracy with tape Wound. a)Group A
Supplying,fixing and wiring rotary selector switch suitable for voltmeter/ammeter(ammeter only)
Supplying,fixing and wiring heavy duty low voltage capacitors conforming to IS 2834.3 phase,400/440 volts grade,for power factor improvement of rotating machinery.like induction motor.Cost per KVAR. a...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25Amps
Fixing a shunt capacitor of …..KVAR capacity with necessary clamps , bolts , and nuts on existing wooden or metal board including banking of more than one capacitor. UP to 5 KVAR
Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour. 32 AMPS
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped wit...
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped wit...
Supplying …..amps rated 3phase with netural bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/FRP/DMC insulator which...
Supply and instalation / Fixing provision of outdoor type Thermoplastic Modular Panel encloser with transparent Polycarbonate Lid, shock proof, IP65(Weather Proof ), rust proof dust proof water proof...
Supplying of 1.1KV LT UG cable XLPE or Heat resistant PVC insulated ,PVC extruded inner sheath armoured UG LT cable as per IS -1554 (part -1) or IS -7098 part-1, Armouring strip thickness in average ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using
Wooden/Aluminum Rollers as directed by the departmental staff In existing trench/duct. LT Cable
Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm
Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 25 mm dia
77.22) Supply & fixing of Caution/Danger name board as per drawing( BESCOM SR . CDS-1)
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete. In soil (Ordinary)
Supplying fixing wiring earth electrode for grounding conduits, I.C. cutouts and other equipment 's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit …. The pit sho...
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps,nails,guttas/spacers etc. Copper strip 8SWG copper...
Supplying and drawing 3 coreflat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and virin...
EXTERNAL WATER SUPPLY LINE Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setti...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction
of shoring, strutting, barricading, caution lights, bra...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after
watering with a lead upto 50 m, and lift upto 1.5 ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and
Constructing Valve chambers Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after
watering with a lead upto 50 m, and lift upto 1.5 ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required sm...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
UNDER GROUND DRAINAGE Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting ou...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
For MACHINEHOLE Earth work excavation for Foundation by mechanical means for all
works & depth upto 3 m, as per drawing and technical specifications,
including setting out, shoring, strutting, barrica...
Earth work excavation for Foundation by mechanical means for all
works & depth upto 3 m, as per drawing and technical specifications,
including setting out, shoring, strutting, barricading, caution li...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013
with latest amendments ended with integral sockets with ISI mark and
conveying to worksite, rolling and lowering into trenches, laying tru...
Supply and delivery at site special moulded variety PVC elbows as per
IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with
its latest amendments. 110 mm dia PVC Elbows
Supply and delivery at site special moulded variety PVC bend as per IS
7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its
latest amendments. 110 mm dia PVC BEND
Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013
with latest amendments ended with integral sockets with ISI mark and
conveying to worksite, rolling and lowering into trenches, laying tr...
Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013
with latest amendments ended with integral sockets with ISI mark and
conveying to worksite, rolling and lowering into trenches, laying tr...
Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013
with latest amendments ended with integral sockets with ISI mark and
conveying to worksite, rolling and lowering into trenches, laying tr...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)
pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and constructing "WIRE CUT BRICK MACHINEHOLE
CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...
Providing and constructing "WIRE CUT BRICK MACHINEHOLE
CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...
Providing and constructing "WIRE CUT BRICK MACHINEHOLE
CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...
Providing and constructing "WIRE CUT BRICK MACHINEHOLE
CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...
Providing and constructing "WIRE CUT BRICK MACHINEHOLE
CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...
Providing and constructing "WIRE CUT BRICK MACHINEHOLE
CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...
Providing and constructing "WIRE CUT BRICK MACHINEHOLE
CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...
Providing and constructing "WIRE CUT BRICK MACHINEHOLE
CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Constructing brick masonry chamber of internal dimension 600x450mm
and depth of 600mm (inner dimensions) with modular bricks of CD 75
in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing & fixing 455x610 mm cast iron cover with frame weight to be
not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...
Providing and fixing 150mm dia. Cast Iron pipe for ventilatiing shaft 5 M high with specials and cowl and with suitable grips in CC 1:2:4 pillar using 10mm to 20mm graded hard granite, with 15 cms. th...
INFILTRATION WELLS Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading
& sizes as per actual requirement, all complete as per direc...
Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
CONDUITING UG CABLE FOR ROAD CROSSING Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, inclu...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing, laying and jointing HDPE pipes of specified grade and
conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired stee...
RCC Nala Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the e appropriate disposal area as per dire...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
External Electrification . Providing 2 pole structure at tapping point near 11kv HT Yard MATERIAL COST RCCDDP structure using 9mts RCC poles with W/L 145kg
11kv class 3CX 400sqmm XLPE UG cable(round armoured UG cable)
Cable termination kit outdoor HS type suitable for 3x400sqmm cable
Cable covering tiles 250x125x 40mm
RCC Hume pipe 2000mm long 150mm dia
collars for RCC hume Pipes
GI pipe 150mm dia for cable raising
Route & Joint indicating slab with MS Anchor rod
Guy set complete with NO 15 strain insulator and correcting materials
11kv 400amps double break gos
H FRAME for mounting Gos
11kv lightning arresters, metal aside 9kv,5KA polymeric type with ground connection (set/3Nos)
Earthing materials pipe type for grounding with all accessories
coyote ACSR conductor for Jumps
caution /danger board
Anticipating Devices(12mm GI barbed wire)
Spiral earth electrode
Transportation charges at 2% on material cost
LABOUR CHARGES Erection of mts RCCDP structure
Cable trench excavation
Laying of cable in trench
Retiling and consolidation
Making of cable termination kit
Covering the cable with tiles
Spreading sand and forming with sand round the cable
Laying of RCC hume pipe
Laying of GI pipe
Laying route and joint indicating stones
Fixing of guyset with no 15 strain insulator turn buckle and anchor rod
Erection of 11kv 400A D/B gos
Erection of H frame for mounting gos
Fixing of 11kv lighting arrestors (slt/3nos)
Providing earthing
Fixing of caution /danger board
Providing anti climbing devises
Fixing of spiral earth electrode
correcting of guyset with mud & sand
Painting of 9mtrs RCCDP structure pole
correcting of 9mtrs RCC poles a) Base connecting 1 4 8,500x650x150mm
correcting of 9mtrs RCC poles b) pole converting in 1 2 4, 650x500x1700mm
correcting of 9mtrs RCC poles c) pole coping in CC 1 2 4 and as per actual
Special Location allowance at 20% on total labour charges Total labour charges
Straight through jointing kit HS type suitable for 3x400 sqmm UG cable
Cable termination kit outdoor HS type suitable for 3x400 sqmm UG cable
Cable termination kit indoor HS type suitable for 3x400 sqmm UG cable
Cable evening tiles 250x125x40mm
RCC hume pipe 2000mm long 150mm dia
Collars for RCC hume pipe
GI pipe 150mm dia for drain crossing /cable raising
Route & Joint indicating slab with MS Anchor rod
End terminates (lugs ) for cable of 3Cx400sqmm.
Transportation charges at 2%on material cost
LABOUR CHARGES Cable trench excavation in an ordinary soil
Laying of cable in trench
Refilling and consolidation
Making of straight through Jointing kits
Making of cable terminations (outdoor / indoor)
Covering the cable with tiles
Spreading sand and forming with sand round the cable
Laying of RCC hume pipes
Laying of GI pipe
Laying of route and Joint indicative stones
Labour charges for horizontal drilling with 6inches bore size with H.D.P.E pipe
Special locality allowance at20% on total labour charges
Bed concreting with cc 1:2:4
Foundation with reinforcement
providing reinforcement
providing plinth with CC 1:2:4
construction of store masonry
Supply of frame of MS channel 100x 50mm and MS angle 40x40x5mm and welding etc complete
Rod type earthing with 40mm dia 3mts long MS rod as per specification
Lettering the RMU with enamel paint and also writing single line diagram of each panel caution board danger board etc including cost of paint, brush etc including cost of paint, brush
Transportation charges at 2% on material cost
LABOUR CHARGES Earth work excavation for RMU: Foundation depositing of earth on bank up to load of 50mts and wit...
Labour charges for fixing of foundation frame of MS channel 100x50mm and MS angle 40x40x5mm ,welding ,fixing in concrete ,aligning the RMU on foundation bed assembly of units connecting busbars from p...
Special locality allowance at 20% on labour charges
Providing compact RMU 11kv class SF6/VCB type (1vl) Material cost: RMU 1VL 350 MVA 630 Amps
Bed concreting with CC 1:2:4
Foundation with reinforcement CC 1:2:4
Providing reinforcement
Providing Plinth with CC 1:2:4
Construction of stone masonry
Supply of frame of MS channel 100x50mm and MS angle 40x40x5cm welding etc complete
Rod type earthing with 40mm dia 3mts long MS rod as per specification
Lettering RMU with enamel paint and also writing single line diagram of each panel caution board etc including cost of paint brush etc
Transportation charges at 2% on material cost
LABOUR CHARGES Earth work excavation for RMU with enamel paint and also writing single line diagram of each panel caution board danger board etc including cost of paint ,brush etc .
Labour charges for fixing foundation frame of MS channel 100x 50mm and MS angle 40x40x5mm,welding fixing in concrete aligning the RMU on foundation bed assembly of units ,connecting busbars from pa...
Special locality allowance at % on labour charges
Erection of 3phase 11kv /433 volts ,100 kvA Transformer mounting structure on 11mts spun pole with 3 Gos system and transformer mounted on masonry platform (excluding cost of transformers) Spun pole ...
single pole transformer structure kit with there 'H' frames with out transformer seating and sealing angle support cross ams for 100 kva(UG cable) transformer -MS
HT single top supports with bolts ,nuts and washers
11kv 5kv polymeric pin insulators (24mmdia FRP rod)
Rabbit ACSR conductor for jumps
Alkathene tube 19mm dia and in coils of 30mts
Guy wire 7/10 SWG
GI pipe 100mm dia
PVC pipe 150mm dia
PVC bend 150mm dia
PVC pipe 25mm dia
11kv solid core type HG tube unit (set/3nos)
11kv 200 amps single break Gos
Earthing materials - pip type for grounding
horizontal cross arms GI
Caution /danger board
Ant climbing devices (12mts GI barbed wire)
11kv lightning arrestors metal oxide 9kv ,5kv polymeric type with ground connectors (set /3nos)
PVC insulation tape in roll of 10mtrs
transportation charges at 2% on material cost
Labour charges: Erection of spun pole 11mts long
Erection of single pole transformer structure
Fixing of ht single top supports
Connecting materials for 11mts spun pole : a) Base concreting 1:4:8,1000x1000x150mm
Connecting materials for 11mts spun pole : b) Pole concreting 1:2:4,1000x1000x2500mm
Connecting materials for 11mts spun pole : c) coping of 1:2:4 and as per actual
Fixing of HG tube unit(set /3nos)
Fixing of 200 Amp single break gos
Fixing of earthings
Fixing of caution / danger board
Fixing of ant climbing devises
Fixing of lightning arrestors (set /3nos)
construction of platform : construction of platform (1.5x1.5x 1.2) mts in size store masonry including cost of material and labour
Providing chain link fencing 50 mm size of 8 gauge properly stretched between rectangular pole and fixed with suitable bolt and nuts including cost of materials and labour
Special locality allowance at20% on total labour charges
Laying of 11Kv 3 core 240sqmm X LPE UG cable using conventional laying with excavation in soil from RMU to Distribution transformers Material Cost: 11Kv class 3C X 240sqmmX LPE, UG cable ( Round armo...
Straight through jointing kits HS type suitable for 3X240sqm Cable
Cable termination kit outdoor HS type suitable for 3X240sqm
Cable covering tiles 250X125X40mm
RCC hume pipes 2000mm long 150mm dia
Collars for RCC Hume pipes
GI pipe 100mm dia for drain crossing/cable raising etc.
Route & Joint indicating slab with MS Anchor rod
UG cable end terminates (lugs) 240sqmm
Transportation Charges at 2% on material cost
Labour Charges : Cable trench excavation
Laying of cable in trench
Refilling and consolidation
Making of straight through jointing kit
Making of cable terminations
Labour charges for horizontal drilling with 6 inches bore size with H.D.P.E pipe
Covering the cable with tiles
Spreading sand and forming with sand round the cable
Laying of RCC hume pipes
Laying of GI pipes
Laying of route and indicating stones
Special Locality allowance at 20% on labour changes
Laying of LT X LPE UG cable from transformer LT distribution box to feeder pillar box (3.5C X 120sqm) 1.1Kv LT X LPE armoured UG cable 3.5core 120sqmm
Supplying and making of straight through jointing kit epoxy type
suitable for 1.1Kv class LT UG cable
Supplying and making straight joint kit epoxy type suitable for 1.1 kv class 3.5c 120sqmm UG cable
Cable covering tiles 250X125X40mm
RCC hume pipes 2000mm long 150mm dia
Collars for RCC hume pipes
GI pipes 100mm dia for drain crossing / cable raising
Route and Joint indicating stones
UG cable end terminals (lugs)
LT feeder pillar box 12 way with porcelain rewire able cutouts and 1No of 630Amps load break switch with copper bus bar
Transportation Charges at 2% on material cost
Labour Charges Cable trench excavation
Laying of cable in trench
Refilling and consolidation
Covering the cable with tiles
Labour charges for horizontal drilling with 6 inches bore size with H.D.P.E pipe
Spreading sand and Forming with sand round the cable
Laying of RCC hume pipes
Laying of GI pipes
Laying of route and joint indicating stones
Special Locality allowance at 20% on labour
Providing Street light on footpath using 9mts tubular pole layout Fabrication, supplying and erecting swaged tubular pole height 9mts having tree section and providing two coats of red oxide paint and...
Supplying and fixing telescopic MS bracket fabricated by using 0.5m length 411 dia telescopic MS pipe with 211 dia 1.5 mtrs long MS bracket and are welded with suitable angle using 6mm thick MS sheet ...
Supplying and fixing LED street light fitting with 40 watts luminary
Supplying of 1.1 KVLTUG Cable XLPE or heat resistant PVC insulated PVC extruded sheathing armoured LTUG Cable 4 x 16 sqmm
Digging of trench of 0.6m deep x 0.50m wide refilling the trench to the required ground level in an ordinary soil
Providing and refilling sand in excavated trench to cover already laid UG cable to a depth of 150mm around the cable
Labour charges for laying of 1.1KV class UG cable in existing trench
Supplying and fixing of class A GI pipe of wall thickness not less than 3.25mm on pole. 50mm dia
Labour charges for horizontal drilling with 6 inches bore size with H.D.P.E pipe
Supplying and fixing LT cast iron dot heads suitable 1.1KV UG cable filled with necessary bitumen compound complete with terminals with clamp, bolt and nuts. 16sqmm
Supply and fixing of heavy duty cable glands suitable for UG cable. 32mm dia
Supplying and making straight through joint with epoxy resin including ferrules and other joining materials. 16sqmm
Supplying and wrapping conductor with cave brick tape roll
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of 16sqmm
Wiring for street light fitting using 4sqmm PVC insulated 1100V grade multi strand copper wire
Sheet metal deep dram street lighting meter box with automatic control switch, contractors with single phase 5-30 amps energy meter and 50/5A CT including wiring
Providing and laying 100mm dia stone ware pipe in existing trench
PVC pipe 40mm dia
PVC pipe 25mm dia
Anti Climbing Device ( 12m GI barbed wire ) including labour charges
Transportation charges at 2% on total material cost
providing tubular pole street lights on median roads in the project Fabricating supplying and erecting swaged tubular pole of height 9mts having three sections and providing two coats of red oxide pai...
Supplying and fixing telescopic M.s bracket fabricated by using 0.5mts 4" dia telescopic MS pipe with 2"dia 1.5m long bracket and are welded with suitable angle using 6mm thick MS sheet grip bolts and...
Supply and fixing of LED street light fitting with 120 watts
supplying of 1.1kv LT UG cable XLPE or heat resistance PVC insulated PVC extruded inner sheeth armoured UG LT cable as per IS -1564 3.5Cx25sqmm
Labour charges for laying of 1.1kv class UG cable in existing trench /GI pipe Stoneware pipe /on wall on pole as required 3.5cx25sqmm cable
Digging of trench of 0.6 mtr deep x 0.5m wide ,refilling the trench to the required ground level and consolidating etc compete in an ordinary soil
Supplying and fixing Lt cost iron pot heads suitable for 1.1kv class UG cable filled with necessary bitumen /insulating compound complete with terminals clamps bolt, nut and washers etc 25sqmm cable
Supplying and fixing of class 'A' (medium duty) GI pipe of wall thick not less than 3.25mm on pole/wall thick not less than 3.25mm on pole /wall /drain crossing with necessary clamping arrangements fo...
Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVc insulated and PVc sheathed steel type wire aluminium conductor...
Supply and fixing heavy duty cable glands suitable for UG cable of 1.1kv class (metal only) 32mm dia
Supply and wrapping the conductor with cawbrick tape foll
Supplying tinned copper lugs and crimping and wiring to terminal point for wires of 25sqmm long barrel
Wiring for street light circuit using 4sqmm FRLS PvC insulated 1100volts grade multistoried copper wire with low conductor ,resistance single core in open or concealed system of wiring with specified ...
Supplying and fixing microprocessor based Electronic timer switch
Supplying and fixing outdoor type Thermoplastic modular panel enclosure with transparent polycarbonate lid shoek proof IP-65 (weather proof ) rust proof ,dustproof ,corrosion proof having internally e...
Supplying and fixing miniature circuit breaker on existing panel board using necessary fixing materials and 'C' type curve indicator ON/OFF energy cross -3 with short circuit breaking capacity of10k a...
Supplying ,fixing and wiring electronic trivector meter (ETV ) 5-63 Amps three phase 4 wire whole current class -I accuracy energy meter
Supplying ,fixing and wiring earth electrode for grounding of energy meter panel using 40mm dia 2.9mm thick GI pipe 2.5mts long burried in a pit .the pits shud b filled with canal portion of salt and ...
Supplying and running GI conductor for grounding using necessary suitable size clamps nails guttas/spacers etc 8SWG GI wire
Transportation charges at 2% on material cost
providing of polygon high mast luminaries wity all accessaries at road circles or junction points in the proposed layouts Fabrication, supplying, erection, testing and commissioning of 20 mts long po...
Supply and fixing of foundation bolts manufactured out of special steel along with bolts ,nuts ,washers, and another plates ,templates etc
Design and casting of suitable foundation for high mast, condensing the safe soil bearing capacity at the site at least 10 tonnes per sqmt at the dept of 2mts . The work shall be carried out as per sp...
Supply, installation, testing ,and commissioning of 1000x12000 x400mm outdoor type panel board fabricated out of 18SWG MS sheet with 50X50X6mm angle TPN MCB pilot lamp set, selector switch 2no electro...
Supply of 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm)5 sqmm
Labour charges for laying of 1.1kv class UG cable in existing trench
Digging of trench of 0.6 mts deep x0.5mts wide retaining the trench to required ground level and consolidating etc. Complete in an ordinary soil
Supplying and fixing of class 'A' (medium duty) GI pipe of wall thickness not less than 3.25mm on pole with necessary clamping arrangements for UG cable of 1.1kv class. 50mm
Supply and fixing L.T. Cast iron pot head suitable for 1,.1kv class UG cable filled with necessary bitumen / insulating compound complete with terminal clamps bolts, nuts and washers etc 25sqmm
Supplying tinned copper lugs and crimping and wiring to terminal points for wire of 25 sqmm UG cable
suppling and fixing heavy duty cable glands suitable for UG cables of 1.1 KV class (metal only ) 45 mm dia
Supplying fixing and wiring earth electrode for grounding of lifts,
transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI
pipe with GI funnel with mesh and suitable size reducer fixed o...
supplying and running of GI strips for grounding connection using necessary fixing materials as required 25X6mm GI strips
Transportation charges at 2% on material cost
Providing solar lights in parks with 5.5mtr MS polesSupplying, testing and commissioning at site outdoor type SOLAR street light wit the following specifications: A stand alone solar photovoltaic syst...
Providing 11Kv, MCVCB feeder panel in the existing sub station 11 Kv, 25KA 1250 Amps MCVCB feeder panel with scada compatible 110VDC
Remote control Anmanaiation panel 1 I/C + 4 Feeder
10 core 2.5 Sqmm copper control cable
HTUG Cable 11 Kv XLP cable of size 3C x 400Sqmm including coiling etc
Indoor termination kit 11kv class suitable for 3x400sqmm X LDE HT UG cable heat shrinkable type
outdoor termination kit 11 KV class suitable for 3x400Sqmm x LPE HT UG cable - heat shrinkable type
RCC 11kv DP structure using 9mts RCC poles with WL-145Kg
400Amps Double Break GOS
Coyote ACSR Conduetor
copper terminates 185 Sqmm heavy duty long barrels
LABOUR CHARGES Loading of 11kv panel and power control cable etc
Unloading of 11kv panel and power control cable etc
Erection alignment and fixing to the foundation indoor/outdoor 11kv switch gear panel/ unit including movement form the unload point of erection
wiring and assisting in testing and commissioning of panel
testing and commissioning, identification of wires ferruling, crimping and termination of wires for annunciation panel etc, testing of relays, CTS PTS and breaker for operation of 11 Kv Panel
Erection of annunciation panel
Grounding of equipments by providing cost iron pipe of 100mm dia ID 13mm thickness 2.75Mts long with 2 parts clamps out of GI flat 50x6mm continuously welded all-around the pipe using cast-iron weltin...
Grounding of equipments with 50x6mm GI flat and connecting Equipments to the earth mat / ground pit each point of earthing with all formation works like bending twisting drilling of holes and connecti...
Laying of control cables
Formation of pot head for 3x400Sqmm 11KvxLPE UG cable
Erection of DP Structure
Fixing of GOS 400Amps Double Break
Earth work excavation in ordinary soil and removing the excavated stuff with all lead and lift, disposed earth leveled Excavated surface leveled and nearly dressed etc complete as per specification
Laying of power cable in the trench
spreading and forming with sand all-round the cable
converting the cable with tiles
Fixing of quyset with 2 break insulators making use of 7/3.15mm (7/10SWG) galvanized steel wire with turn bucket and anchoring arrangements as per approved drawing (including excavation of pit)
providing cement concrete to quyset with materials and labour including nessasory curing etc complete (Cost does not include excavation)
erection of H frame for mounting GOS
miscellaneous labor like letter writing of panel vermin proof drilling, cutting, welding, rubber amt etc,
Switch gear foundation shelter to accommodate 11 kv MCVCB panel and illumination etc,
Download all tender documents and submit your bid