WELCOME MAINT AND REPAIR, REPLACEMENT OF WATER PROOFING TREATMENT, ROOF SHEETS RELATED TO PRE-MONSOON MAINT WORKS IN AGE BR-I AREA INCLUDING INTERNAL ELECTRIFICATION UNDER GE SAUGOR

Amount

M&L for preparation of old decorated wall surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes, craks, etc., and applying one coat of white wash on old decorated surface of walls incl washing floors, cleaning glass, joinery, electric fitting, etc.., complete all as specified and directed.

All as per Srl item No.1 above but two coats of white wash on walls -ditto-

All as per Srl item No.1 above but one coat of white wash on ceiling -ditto-

All as per Srl item No.1 above but two coat of white wash on ceiling surface -ditto-

M&L for preparation of old decorated wall surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes, craks etc and applying one coat of distemper oil emulsion on old decorated surface of walls including washing floors, cleaning glass, joinery, electric fitting, etc., complete all as specified and directed.

All as per Srl item No.5 above but two coats of distemper oil emulsion -ditto-

M&L for preparation of old painted wood or wood based surface of any desription over 10 cm width or girth by removing all splashes, drops, dirt scrapping with sand paper, etc.., and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per Srl item No. 7 above but two coats of synthetic enamel paint on wooden surfaces -ditto-

M&L for prepration of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per Srl item No. 9 above but two coats of synthetic enamel paint -ditto-

M&L for complete removal of existing treatment from walls by scrapping & washing and applying Birla / J. K. wall care white putty 2 mm thick in two layers for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant wall primer complete all as specified and directed.

M&L for complete removal of existing treatment from wall by scrapping of surfaces of old decorated walls etc, properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls etc and applying one coat of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. Make Asian ACE or equivalent make as approved by GE

M&L for complete removal of existing treatment from wall by scrapping of surfaces of old decorated walls etc, properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls etc and applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. Make Asian ACE or equivalent make as approved by GE

M&L for repairs of distrubed/ broken brick holes in walls with CM 1:6 including filling of narrow interstices with PCC 1:2:4 type B-0 (using 12.5 mm agg.) after and including removal / root out of trees, plants, trunks, grasses and creeps etc from roof or wall , finished with 15 mm plaster in CM 1:6 complete all as specified and directed.

S&F in repairs 25 mm bore stainless steel pipe curtain rod including stainless steel brackets & decorative dome, suitable for door/widows curtain fitted to each end complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 Sqm each complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed

Taking down shutters of any description not exc 1 Sqm including removing from site complete all as specified and directed

Taking down shutters of any description exc 1 Sqm but not exc. 2 Sqm each including removing from site complete all as specified and directed

M&L for second class hardwood plain, solid, straight chowkhat and frames wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints complete all as specified and directed

M&L for 35mm thick second class hardwood glazed & skelton shutters factory madeopen rebated and prepared to receive glass or gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads rebated for securing glass etc.size of members of shutters as specified in SSR Part - 1, Section 8, clause 8.20 ( a ) complete all as specified and directed

M&L for 30mm thick second class hardwood glazed & skelton shutters factory made open rebated and prepared to receive glass or gauge etc provided with stiles and rails as specified in SSR Part I edges of framing plain chamfered or rounded fitted with cut and mitred rebated for securing glass etc.size of members of shutters as per Clause 8.20 (b) of SSR Part-I complete all as specified and directed

S&F 30mm thick flush shutters, solid core construction with particle board core & plywood face panels, commercial type on both sides complete all as specified and directed

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.

S&F mild steel bands,straps, supports or stays for rainwater pipes, soil/waste or vent pipes including bolts, if required, hold fast and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for prepration of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in bed blocks for hold fast complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section, 200 mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

S&F extruded aluminium handles, fabricated type anodised, 150 mm size complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type,anodised 125 mm size complete all as specified and directed.

S&F mild steel butt hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooden/steel frames or chowkats complete all as specified and directed

S&F butt hinges 'medium weight', cold rolled mild steel 75 mm size complete all as specified and directed

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with mild steel square tube, in opening complete all as specified and directed.

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back face complete all as specified and directed

S&F aluminium anodised sliding door bolt 250 mm long of extruded section cast aluminium alloy complete all as specified and directed

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repair for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs 18mm/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

S&F in repairs for cup board shutters of 19mm thick prelaminated particle board, interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination with 5mm thick teak wood edging on one side, bottom and top and other side 10mm teak wood edging with rebate and leaping treated with French polish complete all as specified and as directed.

S&F continuous (piano ) hinge, mild steel bright finish or electro galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F in repairs 6 mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work complete all as specified and directed.

S&F in repairs 40mm dia, brass polished, bright finished cupboard knobs fixed with nut, screw and washer complete all as specified and directed.

S&F 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F in repairs ball catches magnet type , with striking plate including complete all as specified and directed.

M&L for brick work with old size subclass 'B' old size bricks, straright or curved on plan exc 6m mean radius built in CM 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches, pillars, etc built in cement mortar complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work / concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor including removal of diberies from site complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:6 brick work or stone surfaces finished even and smooth without using extra cement complete all as specified and directed.

M/L for preparation of new plastered surface of wall and applying Birla / J. K. wall care white putty 2 mm thick in two layers for levelling the surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant wall primer complete all as specified and directed.

M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar (1:4) finished fair and even complete all as specified and directed.

M&L for applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer on newly plastered or unplastered wall surface including preparation of surfaces complete all as specified and directed. Make:- Asian ACE or equivalent.make as approved by GE

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed.

M&L for applying three coats of white wash on new plastered surface ofceiling surface including preparation of surface complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing) including removal of the rubbish off the premises complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in sub base of floor to receive tiles complete all as specified and directed.

M&L for non skid coloured ceramic 6 to 7mm thick floor tiles(square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles laid over & including 15mm thick CM (1:6) screed bed or bedding layer complete all as specified and directed.

All as per item No. 60 above but as in dado / skirting laid over and including 10mm thick rendering in CM 1:4 -ditto-

M&L for glazed ceramic coloured tiles of size 300mmx450mmx6 to 7mm thick as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed in in white or coloured cement to match the shade/colour of tiles laid over & including rendering 10mm thick in CM (1:4) as in backing coat complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles laid over & including 15mm thick CM (1:6) screed bed or backing coat complete all as specified and directed.

All as per Srl item No. 63 above but as in dado / skirting laid over and including 10mm thick rendering in CM 1:4 compete all as specified and directed.

S&F in replacement galvanised mild steel water tubes, 'medium grade', ISI marked, 15mm bore galvanised with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed

S&F in replacement galvanised mild steel water tubes, 'medium grade', ISI marked, 20mm bore galvanised with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed

S&F 1000 ltr capacity of rotational moulded polyethyline water storage tank (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings including PVC float valve 20mm dia includig dismantling water tanks of capacity exc 500 ltrs but not exc 1000 ltrs complete all as specified and directed.

S&F 500 ltr capacity of rotational moulded polyethyline water storage tank (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings includingPVC float valve 20mm dia includig dismantling water tanks of capacity not exc 500 ltrs complete all as specified and directed.

S&F in repairs bib taps cast copper alloy with crutch or butterfly handle chromium plated, fancy type screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed

S&F in repairs multi bib tap 2-in-1, cast copper alloy,chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pie or for brass ferrule of 15 mm bore complete all as specified and directed

S&F in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed

S&F in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed

S&F in repairs brass chromium plated sink mixer for mixing Hot & Cold water high pressure, screwed down for 15mm bore iron pipe complete all as specified and directed

S&F in repairs brass chromium plated 3-in-1 wall mixer for mixing Hot & Cold water with arrangement of head shower and incuding hand shower, high pressure, screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repairs brass chromium plated WHB mixer for mixing Hot & Cold water high pressure, screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repairs choromium plated brass health faucet suitable for EWC including CP chord and brass nozzle and fixed to pipe complete all as specified and directed.

S&F in repairs choromium plated brass jet spray suitable for EWC including CP chord complete all as specified and directed.

S&F in repairs choromium plated brass hand shower 75 mm suitable for wall mixer including CP pipe 1m long and fixed to pipe complete all as specified and directed.

S&F in repair toilet paper holder, box type of brass, chromium plated fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repairs stainless steel perforated grating of 100 mm dia dome type complete all as specified and directed.

S&F in repair tubular towel rail 600 mm long of CP brass 'D' type fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified and directed

S&F in repairs vitreous China WHB white flat back size 550mmx400mm including S&F angle iron brackets, CP swan neck pillar tap fancy type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repairs vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including PCC bedding, connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and directed

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), coloured, with and including CP health faucet, coloured plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe complete all as specified and directed

S&F in repairs 75 mm size brass chormium plated shower rose fancy type including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste pipe and waste coupling complete all as specified and as directed.

S&F in repairs stainless steel plate rack (utensil rack) of overall size (31"x24"x10") made of stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed.

S&F in repairs PVC bathroom cabinet with mirror of size 400mm x 500mm complete all as specified and as directed.

S&F in repairs peg (set of six) stainless steel 350 mm long fixed in repair complete all as specified and directed b

M&L for 16mm to 20 mm thick Granite slab (table rubbed and -polished ), machine cut, for floors/ shelves, cooking platforms, window cills, corner of toilet etc laid over 18 to 20mm tk cudappa stone slab and including 15mm thck in CM 1:4 cement screed and jointed witht grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing edges to be rounded including dismantling of old exisitng stone or flooring of any description & removing rubbish outside MoD land complete all as specified and directed.

M&L for rounding/ chamferring to edges of stone slabss one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and directed.

S&F in repairs glass shelf assembly 60 cm long 5 mm thick glass, chromium plated guard and fixed to wooden plug with chromium plated screws and cup washer complete all as specified and directed..

S&F in repairs chromium plated pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F 15 mm dia Bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, fixed in repairs complete all as specified.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed

S&F in repairs plastic water closet seat, white, closed pattern with recessed bottom and cover including mild steel chromium hinging device complete all as specified and directed.

S&F in repair PVC lid cover for water tank of capacity 500 litres complete all as specified and directed

S&F in repairs PVC waste pipe 32 mm dia, 60 cm long for WHB with cup complete all as specified and directed

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with suitable mild steel clamps complete all as specified and directed.

S&F in repairs 75mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with suitable mild steel clamps complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends with access door 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia with access door complete all as specified and directed.

S&F in repairs PVC (SWR) 110 mm dia junction, single (single T/Y) equal or unequal provided with access door complete all as specified and directed.

S&F in repairs for 75 mm dia PVC ( SWR) nahani trap with grating including jointing with solvant etc complete all as specified and directed

S&F in repairs for 110 mm dia PVC ( SWR) nahani trap with grating including jointing with solvant complete all as specified and directed

S&F in repairs PVC connections 15mm dia and 450mm long with brass nuts complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed by Engr-in-charge..

S&F sheet glass 3 mm thick ordinary glass with oil putty in sqm not exceeding 0.50 Sqm in each pane complete all as specified and directed

S&F 3mm thick pin headed glass and glazing with oil putty in square nexc 0.5 sqm in each pane, complete all as specified and directed

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

Disconnecting existing PVC water tank of exc. 250 and not exc. 500 lit capacity , setting a side for repair , cleaning and removing all scale and dirts from tanks and from mouths of circulating pipes and hoisting if required reconnecting and refixing in position etc including writing of date of cleaning with synthetic enamel paint complete all as specified and directed.

Disconnecting existing water tank of exc.500 and not exc. 1000 lit capacity , setting a side for repair , cleaning and removing all scale and dirts from tanks and from mouths of circulating pipes and hoisting if required reconnecting and refixing in position etc including writing of date of cleaning with synthetic enamel paint complete all as specified and directed.

S&F in repair rubber door seal 32 mm wide with Aluminium strip of size 19 mm wide fixed with machine steel screw with washer suitable for aluminium / wooden door shutters, complete all as specified and directed by Engineer-in-charge. Make : Beeta or equivalent makes as approved by GE

M&L for treatement for sunken portion is as follows :- (A). Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (B). M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement in the following sequence:- (a) M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (b) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion) etc. (c) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick on top. Note :- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measered. complete all as specified and directed.

M&L for PCC(1:2:4)type B-1 using 20mm graded stone aggregates as in padding on roof surfaces for correcting /making proper slope on roof,surface finished fair and even without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for provn of water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items including taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and removing the dismantled material (debries completly) from site to a distance exc. 1.5 km and depositing, from the roof:-

The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed.

Rendering 10 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab ,complete all as specified and directed . (WPC shall be paid separately under respective item).

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 Kg/Sqm

Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 Kg/Sqm over the membrane

Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

M&L for point wiring for the following with 1.5 Sqmm PVC insulated FRLS, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc. complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green:-

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.118 here in before but for power point wiring using with 2.5 sqmm PVC FRLS insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, , including of junction and terminal boxes, all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc. complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green:- .

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.120 here in before but for power point wiring using with 2.5 sqmm PVC FRLS insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc. complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green:-

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.122 here in before but for power point wiring using with 2.5 sqmm PVC FRLS insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire

S&F Modular switch, one way,6 Amp 230, 1 module complete all as specified and directed

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F Modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed

S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed .

S&F Modular fan step regulator 120 Watt 2 module complete all as specified and directed .

S&F Modular bell push 6A one module complete all as specified and directed .

S&F switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed.

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed

S&F switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed.

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed.

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed .

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

S & F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed.

S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed .

S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed.

M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge

M&L surface conduit sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC casing -n-caping/pvc conduit of suitable size . ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge

M&L sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 10 sqmm (for main current and earth ) drawn in & inc PVC Casing-n-caping /pvc conduit of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 10 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge

M&L sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge.

M&L sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 2.5 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 2.5 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge .

M&L sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 1.5 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 1.5 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge

S&F in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement testing and commissioning of MCB SPN 240 volt 63 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement testing and commissioning of MCB SP 240 volt 63 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement double door metallic sheet metal enclosure for MCB DB double door TPN 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate .

S&F in replacement of TPN 63 Amps 415 V including making electrical coming/outgoing connections with lugs/thimbles complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate .

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate .

S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate .

S&F in replacement metallic sheet metal enclosure for DB Single door(IP-42/43) When MCBs to be used SPN 2 ways, 240 V with 200Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate .

S&F in replacement of 2 X 2 ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. Make-Havells cat part No PLANO2X2PLR36WLED857S/CG cat part No.LCPL-36-CDL(2X2)/Bajaj cat part No.BPSF 36W WH LED

S&F in replacement LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make - Havells cat part No LHEXCGP7UN5W013/ BAJAJ cat part No BIBWP10WLED /CG cat part No LBHE-10-CDL.

S&F in replacement PHOTON ULTRA PL-L 18W with very high efficacy suited for installation in existing lamp holder complete all as specified and directed . Make : Havells cat part No PHOTONULTRAPLL419TL18WLED865SPC /CG cat part No .LPLLA-18-CDL/HALONIX cat part no. HLLL-01-18-CW

S&F in replacement TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make Havells Cat Part No LHEXBLP7PN1W020, 4 feet/Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL

S&F in replacement double door metallic sheet metal enclosure for DB double door(DPX-125 ) VTPN 4 Way 415 Volts with 200 Amps rated bus bars IP 43- "IK 09 complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in quoted rate

S&F in replacement MCCB 63 Amps 4 pole, 415 V 16 KA complete all as specified and directed

S&F In replacement MCCB 100 Amps 4 pole, 415 V 16 KA complete all as specified and directed

S&F in replacement box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed . Make Havells Cat Part No LHEXBLP7IN1W009/Bajaj cat part No BCLSB10WH/ CG Cat par No LCTL-9-CDL.

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

S&F in replacement 1100 volts grade heavy duty flat cable PVC insulated stranded aluminium conductor 10 sqmm 2 core over all PVC sheathed in service connection suspended by insulating hangers complete all as specified and directed

S&F in replacement metal clad box enclosure with socket plug top and MCB SP 20 Amps flush mounting enclosure with 2 pin and earth plug socket complete all as specified and directed

S&F in replacement modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed

S&F in replacement PVC insulated and unsheathed single core multi stranded copper conductor 10 Sqmm (Nominal Area) drawn in existing conduit / batten / surface all as specified and directed.

All as per Item Srl item No 167 above but size 16 Sqmm

S&F PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site.

S&F PVC conduit of size 25/32 mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site.

S&F PVC casing caping of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site

AJIT SINGH TUTEJA

Veer Brothers

SUNIL KUMAR KORPAL

M/s Vinod Kumar Korpal, Sagar

Pandey Construction and Engrs