Periodical maintenance on link road Panjawar Bathri road to Satsang Ghar Bathu Rahar Mohalla upto Gurplah Km 1/00 to 1/930 VR162 SH P/L 30mm thick Bituminous concrete with plastic waste additive, side lines, cat eyes Km 1/00 to 1/930 under State Head

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN (eighty to one hundred kilo newton) weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and M.O.R.D.Technical Specification Clause 406 as per direction of Engineer-in-charger including entire carriage of materials within all leads lifts and other incidentals. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and applying primer coat with Bitumen emulsion (SS-I) using emulsion distributor at the rate of 0.70 to1.00 kg. per square metre (Zero point seventy to one ) kilogramme per square metre on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical specification clause -503 including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.25 to 0.30 kg. per square metre (Zero point twenty five to zero point thirty) kilogramme per square metre on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical specification clause -503 including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying bituminous concrete using crushed stone aggregates of specified grading 25mm ( Twenty five millimetre) compacted thickness with bituminous binder VG-30 ( Viscosty grade- thirty) @ 5.50% ( Five five zero percent of total mix weight) and lime filler 2% ( percentage weight of aggregate ) and waste plastic additive @ 8% ( percentage by weight of bitumen) with minium 100-120 TPH capacity ( Hundred- one hundred twenty tonne per hour) hot mix batch type/ drum type plant with electonic control, transported to site, laid with censor paver finisher hydraulic with censor control to the required grade , level and alignment over a previously prepared surface and rolling complete with smooth wheeled roller 8-10 ( Eight-ten) tonne capacity for initial break down rolling and vibratory roller 8-10 ( Eight - ten ) tonne capacity or penumatic typr roller of 12-15 ( Tweleve- fifteen tonne) with tyre pressure of at least 0.56 mpa ( Zero point five six) for intermediate rolling and finish rolling with 6-8 ( six- eight) tonne smooth wheeled tandom roller to achive the desired compaction as specification 2019 complete as per the direction of Engineer-in-charge including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound 3 mm (three millimetre) thick including reflectorising glass beads @ 250 grms (at the rate two hundred fifty grams) per square metre area, thickness of 2.5mm (two point five millimetre) is exclusive of surface applied glass beads as per IRC 35 and MORD specification section 1700 and MORTH 2013 clause 803. The finished surface to be level, uniform and free from streaks and holes including entire carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing cat eye make (3m) of size 100x20mm (One hundred into twenty millimetre) made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The road stud shall support a load of 13635 kg (Thirteen thousand six hundred thirty five kilogram) tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (Thirty five) +/-5 (Plus obligue minus five) degress to base .The reflective panels on both sides with at least 12cm (Twelve centimetre) of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, Goods Service tax, labour cess or other taxes imposed by the Government.

Please Enable Macros to View BoQ information