Repair and strengthening of CHP/Gantry Bunker at Chhatarpur-1 mine of Pathakhera Area

CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Not Applicable

Tender Inviting Authority: Staff Officer (Civil), Pathakhera Area, Western Coalfields Limited

Name of work: Repair and strengthening of CHP /Gantry Bunker at Chhatarpur-1 Mine of Pathakhera Area. NIT no.: PK3550-CIV-E-28-2025-26,Sr.No2

. Category of services (To be selected by department) Category of bidder (To be selected by bidder) To be entered by department Service Tax Category ( To Be Selected by Bidder)

ITC Available Works Contract Bidder's status (mandatory) Rate of GST (in %) Total GST(in Rs.)

Name of the Bidder/ Bidding Firm / Company : Select

S. No. Description of item (Items are from/ based on CPWD DSR-2021 ,Applicable for 2024-25) Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Item code 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar cum Excess(+) Full Conversion INR

Item code 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to dumping ground within 50 metres lead sqm Excess(+) Full Conversion INR

Item code 15.2.1 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead, nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) cum Excess(+) Full Conversion INR

Item code 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. cum Excess(+) Full Conversion INR

Item code 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil cum Excess(+) Full Conversion INR

Item code 2.27 Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete cum Excess(+) Full Conversion INR

Item code 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) cum Excess(+) Full Conversion INR

Item code 4.1.6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) cum Excess(+) Full Conversion INR

Item code 4.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement:1½coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) cum Excess(+) Full Conversion INR

Item code 5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) cum Excess(+) Full Conversion INR

Item code 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete sqm Excess(+) Full Conversion INR

Item code 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more kg Excess(+) Full Conversion INR

Item code 15.6 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved cum Excess(+) Full Conversion INR

Item code10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete kg Excess(+) Full Conversion INR

Item code 15.17.1 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists kg Excess(+) Full Conversion INR

Item code10.22 Welding by gas or electric plant including transportation of plant at site etc. complete cm Excess(+) Full Conversion INR

Item code 13.99.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: One or more coats on old work sqm Excess(+) Full Conversion INR

Item code 13.3.1 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) sqm Excess(+) Full Conversion INR

Item code13.4.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) sqm Excess(+) Full Conversion INR

Item code 13.16.1 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) sqm Excess(+) Full Conversion INR

Item code 13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) sqm Excess(+) Full Conversion INR

Item code 7.38.1.2 Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge)Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble sqm Excess(+) Full Conversion INR

Item code 21.1.1.2 Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium (minimum thickness of powder coating 50 micron) kg Excess(+) Full Conversion INR

Item code 21.1.2.2 Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :)For shutters of doors, windows & ventilators including providing and fxing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) kg Excess(+) Full Conversion INR

Item code 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) sqm Excess(+) Full Conversion INR

Item code10.29.2 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides sqm Excess(+) Full Conversion INR

Item code22.14.2 Grading roof for waterproofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand) cum Excess(+) Full Conversion INR

Item code 14.90.1 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick sqm Excess(+) Full Conversion INR

Item code 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.. sqm Excess(+) Full Conversion INR

Item code13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats . sqm Excess(+) Full Conversion INR

Item code 13.81.1 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) contentless than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. Old work (one or more coats) sqm Excess(+) Full Conversion INR

Item code 13.87.1 White washing with lime to give an even shade: Old work (two or more coats). sqm Excess(+) Full Conversion INR

Item code26.72 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M - 30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. sqm Excess(+) Full Conversion INR

Total impact of GST for the purpose of CTC 0.000 Nos Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information