Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.5 CrAccepted-AOC 9 NAROTTAM KUNJ MADHU NAGAR AGRA CANTT 282001 | AGRA | UTTAR PRADESH | 282001 | ₹1.5 Cr | 1 | Accepted-AOC Being lowest |
| 2 | 2₹1.5 Cr+₹1.8 L (1.25%)Rejected-Finance CHANDAN NAGAR OPP IOCL PERTROL PUMP RAMPUR ROAD BAREILLY UP 243001 | BAREILLY | BAREILLY | UTTAR PRADESH | 243001 | ₹1.5 Cr+₹1.8 L (1.25%) | 2 | Rejected-Finance Not being lowest |
| 3 | 3₹1.6 Cr+₹10.0 L (6.83%)Rejected-Finance 548 C 259 CHANDRODAYA NAGAR DEOPUR PARA LUCKNOW 226017 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226017 | ₹1.6 Cr+₹10.0 L (6.83%) | 3 | Rejected-Finance Not being lowest |
| 4 | Rejected-Technical D 662 WZ 1598 R 1 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | - | - | Rejected-Technical Being Three Class Below for Eligible Calss |
| 5 | Rejected-Technical 12 BHARTI AARTIST COLONY VIKAS MARG NEW DELHI 110092 | EAST | DELHI | 110092 | - | - | Rejected-Technical Being not enlisted in appropriate category ie b(iii) |
| Sl No | Description | Qty | Unit | M/s SCHOLASTIC ENTERPRISES L1 | BHARAT ELECTRICAL TRADERS L2 | M/s National Electrical And Electronics Services L3 |
|---|---|---|---|---|---|---|
| 1.00 | Supply, installation commissioning and testing of copper wound transformer step down, outdoor type complete with first filling of IS:335 ISI marked filtered & dehydrated transformer oil and another standard fittings/accessories HT 33 KV, secondary 11 KV, 3 phase, all as per IS: 2026 of capacity 2000 KVA and following item included-
(a) 17 position on load tap changer (OLTC) (tapping range +5% to -15% in steps of 1.25 % each) with remote tap cubical changer (RTCC) panel & automatic voltage regulator (AVR) with Vector group Dyn-11, with standard fittings - 01 set
(b) HV bare bushing
(c) LV cable box (without glands)
(d) Buchholz relay (having contacts for Alarm & trip)
(e) Oil temperature indicator (having contacts for Alarm & trip)
(f) Winding temperature indicator (having contacts for Alarm & trip)
(g) Marshalling box (having TTB only )
(k) Air release plug complete all as specified and directed. The following standard fittings/accessories are included as- | 2 | Each Job | 63,00,000 ₹1,26,00,000 Lowest | 63,50,000 ₹1,27,00,000 | 67,50,000 ₹1,35,00,000 |
| 1.01(a) Fitting alonwith Transformer 01. NAME, RATING & DIAGRAM PLATE 1 No. 02. EARTHING TERMINALS - 2 Nos. 03. LIFTING LUGS - 02 Nos. 04. OIL LEVEL INDICATOR (FLUSH TUBE) - 1No. 05. OIL DRAIN VALVE WITH PLUG - 01 No. 06. OIL FILTER VALVE WITH PLUG (on & above 160 KVA) - 1 No. 07. CONSERVATOR WITH OIL FILLING HOLE WITH CAP -1 No. 08. THERMOMETER POCKET - 1 No. 09. OIL TEMPERATURE INDICATOR (HAVING CONTRACT FORM ALARM & TRIP) -01 No. 10. WINDING TEMPERATURE INDICATOR (HAVING CONTRACT FOR ALARM & TRIP) - 1 No. 11. SILICAGEL BREATHER - 1 No. 12. REMOVABLE INSPECTION OPENING ON TOP COVER - 1 No. 13. EXPLOSION VENT (If PRV Not Opted) - 1 No. 14. BIDIRECTIONAL C.I. ROLLERS - 4 Nos. 15. ARCHING HORN SET (Only for HV Bare Bushing Type Transformer) - 3 Nos. | ||||||
| 1.02(b) Fittings alongwith OLTC- 01. NAME, RATING & DIAGRAM PLATE -1 No. 02.ON LOAD TAP CHANGER (OLTC) - 1 No. 03. EARTHING TERMINAL- 2 Nos. 04. LIFTING EYE BOLTS - 3 Nos. 05. AIR RELEASE PLUG - 1 No. 06. WINDOW FOR TAP NUMBER - 1 No. 07. OIL DRAIN CUM FILTERING VALVE WITH PLUG -1 No. 08. OIL FILLING CUM FILTERING VALVE WITH PLUG - 1 No. 09. CONSERVATOR WITH OIL FILLING HOLE WITH CAP- 1 No. 10. SILICAGEL BREATHER - 1 No. 11. REMOVABLE MANUAL CRANK HANDLE TO OPERATE OLTC - 1 No. 12. REMOVABLE INSPECTION OPENING WITH COVER - 1 No. 13. OIL SUREGE RELAY - 1 No. Note :- (i) Stand by transformer will be provided by the contractor within 24 hour of failure by his own arrangement to regularize the electric supply. Cost of transportation, replacement, refixing, rent charges and necessary operrational requirements for stand by transformer are deemed to be inclusive of quoted rates by the contractor. No extra will be paid to contractor to make such stand by arrangements. (ii) The manufacturer in house testing lab must be NABL accredited as per IS : 17025 to ascertain the losses mentioned here in BOQ. (iii) The contractor alongwith OEM must ensure the serviceability of the tripping system and safety for the transformer before installation. (iv) Stand by transformer will be provided by the contractor within 24 hour of failure by his own arrangement (v) If the contractor failed to provide standby transformer, then recovery of Rs.30000.00 per day and max of Rs.200000.00 for one month. (vi) Old Transformer will be dismantelled / taken down and will be deposit to MES yard cost of same shall be deemed to inclusive of quoted rates | ||||||
| 2.00 | M&Lfor Traditional earthing Boring 70 Ft GI Pipe 50 mm 70 Ft GI Clamp and salt charcoal complete earthing.
Note : GI Pipe and earth strip will be measured and paid separately | 6 | Each Job | 9,000 ₹54,000 Lowest | 25,000 ₹1,50,000 | 9,500 ₹57,000 |
| 3.00 | Supply and lowering including welding with each other 50 mm dia bore tubes medium grade galvanised with all fttings complete all as specified and directed. | 151 | RM | 400 ₹60,400 | 650 ₹98,150 | 380 ₹57,380 Lowest |
| 4.00 | M&L earth continuity conductor or main earth lead using 32 x 6 mm galvanised strip fixed to pipe buried in ground or drawn in conduit/pipe or fixed to transformer and RTCC panel complete all as specified directed. | 221 | RM | 200 ₹44,200 | 180 ₹39,780 Lowest | 250 ₹55,250 |
| 5.00 | M&L for chemical earthing complete with copper earth plate electrode 90cm x 60 cm x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to copper strip 32x6 mm by means of bolts, nuts, check nuts, and washers of copper all as shown iln electrical plate No. 3 connected to earthing test point and reqired quantity of chemical certified by NABL lab with test certifcate complete all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but with protection pipe and test on completion after dismantling unserviceable earthing (above GL only) complete all as directed. | 6 | Each Job | 35,000 ₹2,10,000 Lowest | 1,00,000 ₹6,00,000 | 65,000 ₹3,90,000 |
| 6.00 | Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed for laying of under ground cable, foundation of pole and stay etc. complete all as specified and as directed | 80 | Cum | 100 ₹8,000 Lowest | 150 ₹12,000 | 185 ₹14,800 |
| 7.00 | Returning, filling in, including spreading, levelling, watering and well remmining in layers not exc 25 cm complete all as specified and directed | 72 | Cum | 70 ₹5,040 Lowest | 100 ₹7,200 | 85 ₹6,120 |
| 8.00 | Removing excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed. | 8 | Cum | 80 ₹640 Lowest | 80 ₹640 Lowest | 120 ₹960 |
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
21 May 2026, 6:00 pmClosed
HQ CWE Agra
112. Taj Road, Agra Cantt
SPL REPAIR / REPLACEMENT OF BER TRANSFORMERS, 33/11 KV AGAINST BER AT FATEHGARH UNDER AGE (I) FATEHGARH
2026_MES_759739_2
86281/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Fatehgarh
MES contractors enlisted for Class B and above and category b(iii) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹1,000
AGE (I) Fatehgarh
₹2.2 L
27 Jul 2026
7 May 2026
28 May 2026
7 May 2026
21 May 2026
14 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, installation commissioning and testing of copper wound transformer step down, outdoor type complete with first filling of IS:335 ISI marked filtered & dehydrated transformer oil and another standard fittings/accessories HT 33 KV, secondary 11 KV, 3 phase, all as per IS: 2026 of capacity 2000 KVA and following item included-
(a) 17 position on load tap changer (OLTC) (tapping range +5% to -15% in steps of 1.25 % each) with remote tap cubical changer (RTCC) panel & automatic voltage regulator (AVR) with Vector group Dyn-11, with standard fittings - 01 set
(b) HV bare bushing
(c) LV cable box (without glands)
(d) Buchholz relay (having contacts for Alarm & trip)
(e) Oil temperature indicator (having contacts for Alarm & trip)
(f) Winding temperature indicator (having contacts for Alarm & trip)
(g) Marshalling box (having TTB only )
(k) Air release plug complete all as specified and directed. The following standard fittings/accessories are included as- | 2 | Each Job | 100 | ₹200 |
| 1.01 | (a) Fitting alonwith Transformer
01. NAME, RATING & DIAGRAM PLATE 1 No.
02. EARTHING TERMINALS - 2 Nos.
03. LIFTING LUGS - 02 Nos.
04. OIL LEVEL INDICATOR (FLUSH TUBE) - 1No.
05. OIL DRAIN VALVE WITH PLUG - 01 No.
06. OIL FILTER VALVE WITH PLUG (on & above 160 KVA) - 1 No.
07. CONSERVATOR WITH OIL FILLING HOLE WITH CAP -1 No.
08. THERMOMETER POCKET - 1 No.
09. OIL TEMPERATURE INDICATOR (HAVING CONTRACT FORM ALARM & TRIP) -01 No.
10. WINDING TEMPERATURE INDICATOR (HAVING CONTRACT FOR ALARM & TRIP) - 1 No.
11. SILICAGEL BREATHER - 1 No.
12. REMOVABLE INSPECTION OPENING ON TOP COVER - 1 No.
13. EXPLOSION VENT (If PRV Not Opted) - 1 No.
14. BIDIRECTIONAL C.I. ROLLERS - 4 Nos.
15. ARCHING HORN SET (Only for HV Bare Bushing Type Transformer) - 3 Nos. | - | - | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.12 MB
BOQ_855388.xls
BOQ • 9.63 MB
TENDERDOC.pdf
Tender Documents • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .