Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹3.2 LAccepted-AOC MIG NO II 41 PANDIT RAVI SHANKAR SHUKLA NAGAR KORBA CG 495677 | KORBA | CHHATTISGARH | 495677 | L-1 | Accepted-AOC Accepted as the bidder attains L-1 status | |
| 2 | Rejected-Technical GAYATRI SADAN PALI ROAD DIPKA DISTT KORBA C G 495452 | DIPKA | KORBA | CHHATTISGARH | 495452 | - | Rejected-Technical Rejected as the bidder attains L-3 status | |
| 3 | Rejected-Technical HARDI BAZAR DIST KORBA CG 495446 | KORBA | CHHATTISGARH | 495446 | - | Rejected-Technical Rejected as the bidder attains L-5 status | |
| 4 | Rejected-Technical BHAGWAN NIWAS WARD NO 30 DADARKHURD DADAR NALLA KORBA CG 495677 | KORBA | CHHATTISGARH | 495677 | - | Rejected-Technical Rejected as the bidder attains L-2 status | |
| 5 | Rejected-Technical | - | Rejected-Technical Rejected as the bidder attains L-4 status |
| Sl No | Description | Qty | Unit | m/s bhagwan saran and associates L2 | DINESH KUMAR L5 | M/s-S.R. Sharma L6 | A. K. Rakesh (Arvind Kumar Rakesh) L3 | M/S RAJENDRA SINGH L4 | BLUE POWER L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of MS pipeline, Size: 100mm including shifting from site to loading point, loading, unloading, transportation and placement as per instruction of Engineer Incharge | 300 | Mtr | 10 ₹3,000 Lowest | 25.28 ₹7,584 | 50 ₹15,000 | 50 ₹15,000 | 20 ₹6,000 | 50 ₹15,000 |
| 2.00 | Laying and jointing of MS pipeline, Size: 100mm including loading and unloading (within unit/ project), transportation and placement, welding of pipes and cutting and fitting of packing (if jointing by nut-bolt) | 2,500 | Mtr | 125 ₹3,12,500 | 139.65 ₹3,49,125 | 170 ₹4,25,000 | 98.85 ₹2,47,125 | 125 ₹3,12,500 | 95 ₹2,37,500 Lowest |
| 3.00 | Making of bends, Size: 100mm | 15 | No. | 100 ₹1,500 Lowest | 445.85 ₹6,687.75 | 550 ₹8,250 | 2,000 ₹30,000 | 400 ₹6,000 | 500 ₹7,500 |
| 4.00 | Fitting of Sluice Valves, Size: 100mm | 6 | No. | 200 ₹1,200 Lowest | 329.46 ₹1,976.76 | 1,000 ₹6,000 | 2,000 ₹12,000 | 400 ₹2,400 | 500 ₹3,000 |
| 5.00 | Welding for flanges, complete with jointing works after necessary cutting, welding works of Size: 100mm | 20 | No. | 100 ₹2,000 | 66.87 ₹1,337.4 | 400 ₹8,000 | 1,050 ₹21,000 | 40 ₹800 Lowest | 100 ₹2,000 |
| 6.00 | Providing and fixing of MS Nut and Bolts with spring washers (different sizes such as 5/8", 3/4" etc. as per instruction of Engineer Incharge) | 40 | Kg | 100 ₹4,000 | 48.73 ₹1,949.2 Lowest | 140 ₹5,600 | 100 ₹4,000 | 110 ₹4,400 | 150 ₹6,000 |
| 7.00Note: 1). The estimated cost put to tender is excluding the PF and Pension Component. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 08 nos. 2). Industrial gas, welding electrodes, vehicle mounted DG Set (Rating: Minimum 7.5 KVA and should be of sufficient rating which should be suitable for pipeline welding works) with diesel, welding machine, tools and tackles, safety related gears/items etc. are in the scope of the contractor. 3). MS Pipe, Valves, Truck, crane will be provided by the Department. | |||||||||
| 8.00 | Total impact of GST for the purpose of CTC | 1 | Nos | - | - | - | - | - | - |
Tender Value
₹11.2 L
EMD Value
₹14,000
Closing Date
30 Aug 2025, 5:00 pmClosed
Staff Officer (EnM)
Office of the General Manager, Dipka Area, Ph. No. 9424141353
Installation of waterline arrangement for providing water supply from Sirki Pond to Coal Stock No. 15, Sriram camp etc at Dipka Expansion Project.
2025_SECL_341631_1
SECL/GM/DA/SO(EnM)/ e-tender/25-26/79 dtd-16/08/25
Open Tender
Electrical and Maintenance Works
Item Rate
45 days
Dipka Expansion Project, Dipka Area
Please refer to tender documents
3 documents required · 3 mandatory
₹14,000
3 Dec 2025
18 Aug 2025
1 Sept 2025
18 Aug 2025
30 Aug 2025
19 Aug 2025
18 Aug 2025 - 25 Aug 2025
Amount
Dismantling of MS pipeline, Size: 100mm including shifting from site to loading point, loading, unloading, transportation and placement as per instruction of Engineer Incharge
Laying and jointing of MS pipeline, Size: 100mm including loading and unloading (within unit/ project), transportation and placement, welding of pipes and cutting and fitting of packing (if jointing by nut-bolt)
Making of bends, Size: 100mm
Fitting of Sluice Valves, Size: 100mm
Welding for flanges, complete with jointing works after necessary cutting, welding works of Size: 100mm
Providing and fixing of MS Nut and Bolts with spring washers (different sizes such as 5/8", 3/4" etc. as per instruction of Engineer Incharge)
Note: 1). The estimated cost put to tender is excluding the PF and Pension Component. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 08 nos. 2). Industrial gas, welding electrodes, vehicle mounted DG Set (Rating: Minimum 7.5 KVA and should be of sufficient rating which should be suitable for pipeline welding works) with diesel, welding machine, tools and tackles, safety related gears/items etc. are in the scope of the contractor. 3). MS Pipe, Valves, Truck, crane will be provided by the Department.
Total impact of GST for the purpose of CTC
m/s bhagwan saran and associates (BID ID -1177247)
A. K. Rakesh (Arvind Kumar Rakesh) (BID ID -1178841)
M/S RAJENDRA SINGH (BID ID -1179545)
DINESH KUMAR (BID ID -1177314)
M/s-S.R. Sharma (BID ID -1178729)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .