Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹40.7 L+₹2.3 L (5.98%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹43.2 L+₹4.9 L (12.7%)Rejected-Finance FLAT NO A 15 ARCHANA GREEN SOCIETY NIBM ROAD KONDHWA PUNE 411048 | PUNE | MAHARASHTRA | 411048 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹44.2 L+₹5.8 L (15.2%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹47.3 L+₹8.9 L (23.2%)Rejected-Finance N A | NA | NA | 121004 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
24 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 28 OF 2023-2024REPAIRS TO MISC B/R WORKS INCLUDING INTERNAL/EXTERNAL FINISHES TO SCOM, ZONGA PLATOON, MT, MES IB, 16QG AND CERTAIN OTHER WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (N) PUNE
2023_MES_606347_1
GE (N) P/TOKEN- 28 OF 2023-2024
Open Tender
Civil Works
Item Rate
270 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹98,000
Yes
8 Sept 2023
28 Jun 2023
31 Jul 2023
28 Jun 2023
24 Jul 2023
11 Jul 2023
29 Jun 2023 - 6 Jul 2023
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 12.0m height of Bldg complete all as specified and directed
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
M&L for Fly ash brick work using old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as spd.
M&L for pre-cast cement concrete block masonry with solid blocks exc10cm in width,type C-1,1:3:6 (using 20mm graded stone aggregate) and setting in cement mortar 1:6 complete all as specified and directed
M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces and finishing the surfaces even and smooth without using extra cement upto 12.0m height of Bldg complete all as specified and directed
M&L for rendering 15 mm thick on faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement upto 12.0mtr height of Bldg complete all as specified and directed
M&L for 10mm thick cement plaster in CM 1:3 on concrete ceiling surfaces and finishing the surfaces even and smooth without using extra cement with any height of Bldg complete all as specified and directed
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer on new surface upto 12.0m height of Bldg complete all as specified and directed
M&L for preparation of new plastered surfaces of wall and applying two coats of OBD of any tint over a coat of alkali resistant primer upto 12.0mtr height of Bldg complete all as specified and directed
M&L for preparation of new plastered ceiling surfaces and applying two coats of white wash over a coat of primer upto 12.0mtr height of Bldg complete all as specified and directed
M&L for preparation of old surfaces of wall/ceiling/floor by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc, removing nails etc and making good surface by applying white birla/JK wall care putty wherever required, smoothen surface by sand paper and applying two coat of acrylic exterior emulsion paint over a coat of primer of Bldg upto 12.0mtr height complete all as specified and directed. Note:(i)The contractor shall furnish 5 years performance warranty as per manufacturer of paint (ii) The work should be done by a company recommended applicator and he should be able to furnish stagewise of site technical reports from the concerned company technologist
Preparation of old surfaces of wall/ceiling by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc, removing nails etc and making good surface by applying white birla/JK wall care putty wherever required, smoothen surface by sand paper and applying one coat of acrylic exterior emulsion paint complete all as specified and directed.
M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such as , CEMISTIK PU 50 heavy Duty warerproofing coating or equivalent complete all as per manufacturer instruction as directed.
M&L for complete removal of existing treatment on walls, preparing surfaces and make surface free from loose particles oil stains etc. and surface ideally pre-wetted, applying white cementitious wall care fine putty average thickness1.5mm complete all as specified and as directed.
M&L preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coats of oil bound distemper on old surfaces of walls all as specified and directed.
M&L preparation of wall including cornices, pillasters by brooming down and applying two coats of oil bound distemper on surfaces of walls all as specified and directed.
M&L for preparation of old treated steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
M&L for preparation of old painted wood or wood based surface and applying one coat of synthetic enamel paint all as specified and directed.
M&L for french polishing on wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying two or more coats of french polish till the desired finish is obtained complete all as specified and as directed.
M&L for preparation of old decorated/painted surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed.
M&L for preparation of old painted surfaces of wall and applying one coat of lustre paint complete all as specified and as directed.
M&L preparation of old painted surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coats of oil bound distemper on old ceiling surfaces of walls all as specified and directed.
M&L for preparation of old painted surfaces of walls and applying one coats of cement base paint complete all as specified and as directed
M&L for preparation of old painted surfaces of walls and applying two coats of cement base paint complete all as specified and as directed .
M&L for preparation for scrapping out old treated wooden surfaces of any description like floors, walls,ceiling, stair cases etc sanding the surfaces using sanding machine, application of pigment and hardner to desired colour and finally applying two coats of malamine polish with spray guns, compressor etc till obtained with glossy surface complete all as specified and directed.
M&L for preparation of old painted surfaces of wood and applying one coat of synthetic enamel paint on ceiling surface complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm for hard/dense soil complete all as specified and directed
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation for shafts, wells, cesspits, manholes, pier holes, pole etc n.exc 10sqm on plan and getting out hard/dense soil complete all as specified and directed
M&L for PCC 1:3:6 type C2 (using 40mm graded agg) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm dia of bore pipe including demolition of existing old one with PCC complete all as specified and directed
-Ditto- all as per item No 29 here in before but 200mm dia of bore
M&L for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition of existing old one (salt glazed earthware, AC or reinforced pipes etc) set in cement mortar complete all as specified and directed
-Ditto- all as per item No 31 here in before but 200mm dia of bore
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting our existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC(1:2:4) type B-1, smooth finished and reforming benching as required for 150mm dia of pipe complete all as specified and directed.
Removing excavated material of soil n exc 50m and depositing where directed at a level n exc1.5 m above the starting point complete all as specified and as directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of hard/dense soil complete all as specified and as directed
M&L for PCC type B-1, 1:2:4 (20mm graded agg) as in copings, kneelers, apex stones,bed plates, kerbs water throughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed
S&F in repair for factory made 50mm thick, 950mmx650mm manhole cover with additional frame for fixing, of fixing of pre cast RCC 1:2:4 type B-1 (using 20mm graded agg) finished the surface even and fare including reinforcement MS TMT bars 8mm dia @ 125mm centre to centre bothways and set in CM 1:4 and handles including demolition of RCC (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.
-Ditto- all as per item No 37, here in before but 600mmx450mm size complete all as specified and directed
Demolition of cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed
M&L for PCC type D-2,1:4:8 (using 40mm graded stone agg) as in foundations, sub base of floor, filling and mass concrete complete all as specified and directed
M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.09 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 including dismantling of existing tiles complete all as specified and directed
M&L for glazed ceramic coloured tiles of size 450x300x7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM1:4 including dismantling of existing tiles complete, all as specified.
M&L non skid coloured vitrified double charged tiles 8-10mm thick (square/ rectangular) area of each tile exc 0.18sqm but not exc 0.36sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 including dismantling of existing tiles of any description complete all as specified and directed
-Ditto- all as per item No 43 here in before, but skitings/dado on vertical surfaces including 10mm thick backing of cement plaster in CM 1:4 complete all as specified and directed
M&L non skid ceramic coloured tiles of size 400mmx400mmx7-8mm thick laid set and jointed in neat cement slurry and pointed in white or colour cement to match including 20mm thick screed bed or bedding in CM 1:6 including dismentling of existing tiles of any description complete all as specified and directed
-Ditto- all as per item No 45 here in before, but skitings/dado on vertical surfaces incl 10mm thick backing of cement plaster in CM 1:4 complete all as specified and directed
M&L for textured heavy duty exterior ceramic tiles of size 300mmx300mmx10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 20mm thick in CM (1:6) including dismantling of existing tiles complete all as specified and directed Make: Johnson Endura textured design or equivalent of Kajaria/Somany).
M&L for exterior wall cladding tiles of size 600x300x8-10mm thick for decorative purposes set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM1:4 including dismantling of existing tiles complete all as specified and directed
M&L for Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB platform and like set in cement mortar (1:4) incl pointing in white or coloured cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges including dismantling of existing stone slab complete all as specified and directed
Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and directed
M&L for Machine cut kota stone slab flooring 18-20mm thick over in riser of steps, skirting, dado and pillar laid over 10mm thick packing of plaster in CM 1:4 and jointed with cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with rubbing and polishing including dismantling of existing of old one complete all as specified and directed
M&L for machine cut 20-25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing in cement mortar and making good to disturbed surface including dismantling of existing of old one complete all as specified and directed
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. Make: JINDAL, TATA, RAVINDRA
-Ditto- all as per Srl item No 53 here-in-before, but fixing only
S&F for 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. Make: JINDAL, TATA, RAVINDRA
'- Ditto- all as per Srl item No 55 here-in-before, but fixing only
M&L for cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified.
S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed Make : Cera/Prayag/Johnson.
S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm all as specified. Make : Prayag/Polytuff.
S&F rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. Make: Sintex, Polycon, Rotex
-Ditto- all as per item No 60 here in before but 1000Ltrs capacity complete all as specified and directed.
S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor all as specified.Make : Cera/Prayag/Johnson Pedder.
S&F in repairs vitreous China wash down water closet pan (pedestal pattern) ETWC white, including trap, connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed Make : Cera/Prayag/Johnson Pedder.
S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including 32mm brass CP waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Pt No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair vitreous china Urinal, Half stall type, white including brass CP 32mm waste pipe and CP brass spreader for fixing with 15 mm dia pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and incl 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe complete all as specified and directed
S&F in repair vitreous china long stall type Urinal, white including brass CP 32mm waste pipe and CP brass spreader for fixing with 15 mm dia pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and incl 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe Make: Cera 5001 large urinal (white of size 420x395x635mm) complete all as specified and directed
S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm incl CP brass waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and incl M S brackets complete all as specified and directed Make : Cera/Prayag/Johnson.
S&F in repair plastic closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/semi pedestal and WC (Anglo indian type) complete all as specified and directed.
S&F in repair 32mm dia adjustable PVC waste pipe for WHB/kitchen sink of length 1.0m incl fixing the same complete all as specified and directed Make:Prayag or ISI marked
S&F in repair 32mm dia plain PVC waste pipe for urinal of length upto1.0m incl coupling incl fixing the same complete all as specified and directed Make:Prayag or ISI marked
S&F in repair 40mm dia adjustable PVC waste pipe for kitchen sink upto1.0m incl coupling incl fixing the same complete all as specified and directed Make:Prayag or ISI marked
S&F in repair cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified and directedMake : Prayag/Polytuff.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, incl waste coupling waste coupling of CP brass of suitable size, 32mm dia PVC waste pipe and CP grating and bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm all as specified.
S&F in repair stainless steel plate rack of size 24" X 24" X 10" complete all as specified and directed Make: Prayag/Nirali/Bluestar or equivalent
S&F in repair stainless steel plate rack of size 24" X 30" X 10" complete all as specified and directed Make: Prayag/Nirali/Bluestar or equivalent
S&F in repair stainless steel plate rack of size 24" X 36" X 10" complete all as specified and directed Make: Prayag/Nirali/Bluestar or equivalent
S&F in repair stainless steel plate rack of size 31" X 36" X 10" complete all as specified and directed Make: Prayag/Nirali/Bluestar or equivalent
S&F in repair 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed all as specified.
S&F in repair 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed all as specified.
S&F in repair for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore, ISI marked complete all as specified and as directed.
S&F in repair for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 25mm bore, ISI marked complete all as specified and as directed.
S&F in repair glass shelf of size 450mmx150mmx8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified and directedMake:Jaguar or equivalent
S&F in repair corner glass shelf of size 300mm dia and 8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified and directedMake:Jaguar or equivalent
S&F in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : CERA -F8030103 or of equivalent .
S & F in repair brass chromium plated soap dish, fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE
S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Johnson Fusion series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE
S&F in repair brass chromium plated towel ring all as specified and directed. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and directed Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs washing machine cock quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and directed Make:Johnson Cat Pt No T2804C or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs bip taps standard of PTMT any colour 15mm bore min wt 90gms Make: Prayag or equvalent of ISI marked
S&F in repairs Pillar taps standard of PTMT any colour 15mm bore min wt 125gms Make: Prayag or equvalent of ISI marked
S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and directed Make : Johnson Magna series Cat part No: T2804C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repairs pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and directed Make:Johnson VIVA new series Cat Pt No: T4801C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.
S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR Fusion Series or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and directed Make: Johnson Eco Cat part No: T3910C or of equivalent
S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified and directed Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent
S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1,1:2:4 using 20mm graded stone aggregate complete all as specified and directed
S&F in repair grating round 75 mm size of steel CP with/without hole all as specified.
S&F in repair grating round 100mm size of steel CP with/without hole all as specified.
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and directed.
S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and directed.
S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified and directed.
S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified and directed.
S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and directed.
S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and directed.
S&F in repair stack clamps out of 50 mm 5 mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as specified and directed
-Ditto- all as per item No 115, here in before but on 75mm dia of bore
M&L for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and reparing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.
M&L for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock
M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded n.exc 6mm complete all as specified and directed.
M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded exc 6mm but n.exc 9mm complete all as specified and directed.
S&F in repair of door seal made out of aluminum section/flat colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified
Removing of vegetation / plantation on the wall/ roof/ any position of up to fourth storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good surface incl removing /refixing of CI/GI pipe lines complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)
Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed
-Ditto - all as per srl item No. 123 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed
Taking down shutters of any description not exc. 1.5 sq. m each complete all as specified and directed
- Ditto- all as per srl item No. 125 above but exc. 1 sq. m but n exc 2 sqm each complete all as specified and directed
S&F for aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed.
S&F for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
S&F of factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum, all as specified and directed. NOTE: During fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S&Fof factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S&F in repair second class hardwood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.
M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified and directed
S&F for second class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Pt I, section 8, clause 8.24 (a) supplied and fitted to chowkats.
S&F for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.
S &F for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed.
S &F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed.
S&F in repair 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames in any height of Bldg incl necessary scaffolding etc complete all as specified and directed
Ditto- all as per item No 137 above but figured/frosted glass complete all as specified and directed
S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
S&F in repair 100mm butt hinges med weight cold rolled mild steel fixed with chowkats complete all as specified and directed
S&F for 150mm, Mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed
S&Fin repair 250mm long anodised aluminum sliding door bolts with hasp and staple(bolt type) and fixing clip sheet cast or extruded sections and fixing bolts and sliding bolts complete all as specified and directed
S&F in repair 125mm long aluminum anodised barrel tower bolts of extruded section and fixed with door complete all as specifed and directed.
S&F in repair 125mm long aluminum handles, fabricated type anodised and fixed with door complete all as specifed and directed.
S&F in repair for floor door stopper of brass body and tongue not less than 100mm long, anodised with hard drawn steel spring all as specified and as directed.
S&F in repair drapery curtain rod of stainless steel 20mm/25mm dia complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified.
S&F in repair bracket for curtain rod of stainless steel 20mm dia fixed with rawl plug and steel screw compete all as specified.
S&F in repair stainless steel hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge
S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete.
S&F 18/19mm thick ply board fixed fixed with to timber framed work including taking down with existing one complete all as specified and directed
S&F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply
S&F for HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size as in cupboards/shelves/cabinets and similar work etc including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply
S&F auto closing hinges with stainles steel screws incl taking down with existing one complete all as specified and directed
S & F continuous (piano) hinges, stainless steel, width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.
Taking down shutters of any description area exc 1.0 Sqm but not exc 2.0 Sqm each and refixing in same opening including easing, adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified and directed (S&F of new builder's hardware if specially ordered shall be measured and paid for separately)
S&F in repair stainless steel mortice lock,vertical type, size 100mm with 4 levers fixed with door complete all as specified
M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.
-Ditto- all as per item No 161, here in before but except paver blocks
M&L for 12mm thick mineral fibre false ceiling board on and including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, including dismantling old false ceiling boards and grid complete all as specified and as directed. Make :Armstrong, Diaken, New Age. Note: Height of ceiling is above 5 metres.
S&F in repair mineral fibre false ceiling board of size 600mmx600mmx12mm thick, fixed on existing false ceiling grid including tightening of suspended, straightening of grid members complete all as specified and directed Make:-Gyproc/Armstrong.
S&F of mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 including dismantling existing steel complete all as specified and as directed.
S&F in repair for steel work in tubular trusses,rafters, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed
M&L for Cutting holes in brick walls exc half brick and n.exc full brick wall in cement or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required
Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings
Dismantling of asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed
S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.
-Ditto- all as per item No 170, here in before but plain sheets on riges,valley gutters and similar works etc complete all as specified and directed
S&F for 2mm thick fibre glass reinforced translucent corrugated or plain sheeting with coach screw and washers in roof or wall etc complete all as specified and directed.
S&F in repair for second class hardwood plain fillets, square, rectangular or triangular in section, secured with nails or brads, sectional area exc 3 and n.exc 6 sq.cm incl two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified . (Minimum weight 210gms)
S&F in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified . (Minimum weight 142gms)
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.
M & L for Providing precast cement concrete, PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate), as in louvres and jallies, 50mm thick (measured solid), including all mouldings, set in CM 1:4 including dismantling of existing old one complete all as specified & directed.
M&L for grinding of existing kota stone/ marble floor with grinding machine till desired smoothness is achieved and wax polishing the same as specified and directed.
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
M/s Akshay Contruction
M/S Eknath agencies
L.T Associate
N B ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .