REPAIR / MAINTENANCE OF WOODEN AND STEEL CHAIRS UNDER GE(S) BATHINDA AT BATHINDA MIL STN

Amount

Material and & Labour for repair to chair CB steel with arms by replacing the following parts with new which are covered under serial item no.1.01 to 1.03 of BoQ with first class teak wood as approved by GE. Rest all as per the drawings and as directed (Drg No FD-75(M)

Seat/back having 30mm thickness and 50mm width of rail (duly caned with approved quality of cane and as per godrej pattern)

Handle made out of first class teak wood size 400mm x 50mm x 25mm.

Re-caning seat / back.

Material and Labour MS cleats of size 25mm x 3mmx60mm long duly welded to frame to support seat to chair CB steel with arms.

Material and & Labour for repair to Chair CB steel without arms by replacing the following parts with new which are covered under serial item no.2.01 to 2.02 of BoQ with first class teak wood as approved by GE. Rest all as per the drawings and as directed.(Drg No FD-75(M)

Seat/back having 30mm thickness and 50mm width of rail (duly caned with approved quality of cane and as per godrej pattern)

Re-caning seat / back.

Material and Labour MS cleats of size 25mm x 3mmx60mm long duly welded to frame to support seat to chair CB steel without arms.

Material & Labour for preparation of old steel surface of chair verandah and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and recaning with 4-5 mm half round 0.6 thick plastic cane made out of virgin plastic, in existing pattern complete as approved by GE .Rest all as specified and directed by Engr-in-charge.. ( Drg No. FD-359/256/19 )

Material & Labour for preparation of old steel surface of chair verandah (Newar) and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and Reweaving of seat and back with virgin plastic newar of 50 to 55 mm vide closely woven through out complete as approved by GE.Rest all as specified and directed by Engr-in-charge. ( Drg No.256) Note :- Cost of virgin plastic newar shall not be less than 160/- per kg.

Material & Labour for preparation of old steel surface of chair verandah (MAP) and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and fixing PVC seat and back 4mm thick with wt not less than 1.85 kg and grooves 90mm x 10mm 10 Nos. on seat and back of approved quality as approved by GE .Rest all as specified and directed by engr-in-charge. ( Drg No. FD/MAP-II/06)

Supply & Fixing of flat iron stiffener of size 25mmx5mm thick beneath the seat of chair Verandha (MAP) of suitable length to support to seat of chair Verandah (MAP) duly painted with two coat of synthetic enamel paint white colour (Ist Gde quality) over a coat of Red oxide primer complete all as specified and directed by Engineer-in-charge.

Taking out u/s strips from Chair Verandah Offrs and Supply & Fixing new strip of size 60mm wide x 3mm thickness of appropriate length to chair verandha complete all as specified and directed by Engr -in - Charge. (Drg No.FD/E6/MAP/11)

Material & Labour for repair to Chair writing MAP (made out of tapestry cloth) by replacing following unserviceable parts with new which are covered under serial item no.8.01 to 8.03 of BoQ as per drawing. Rest all as directed by engr-in-charg (Drg No.FD/E6/MAP/12) Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of tapestry cloth shall not be less than 250/-per meter.

Tapestry cloth of seat and back complete.

Tapestry cloth and foam of seat/ back complete.

Plywood of seat /back.

Material & Labour for repairs to Chair computer/chair revolving (made out of tapestry cloth) by replacing following unserviceable parts with new which are covered under serial item no.9.01 to 9.08 of BoQ as per drawings/TP. Rest all as directed by engr-in-charge. (Drg No.FD/E6/MAP/01,TP) Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 250/-per meter.

Tapestry cloth of seat and back complete.

Tapestry cloth and foam of seat/ back complete.

Plywood of seat /back.

Hydraulic of suitable size.

Push back plate complete all as specified and directed

Base PVC/Iron of suitable size and pattern.

Wheel of suitable size and pattern.

Arms as requred by size and design.

Material & Labour for repairs to Chair School with hand board by replacing following unserviceable parts with new which are covered under serial item no.10.01 to 10.03 of BoQ as per drawings. Rest all as directed by Engr-in-charge. (Drg No.FD/E6/MAP/05)

Seat and back in single piece of chair shall be of propylene co polymer seat weight 1.20kg moulded to shape and size all as shown on drawing Seat shall be fixed to frame with suitable bolts & nuts as per drawing and as directed by Engineer-in-charge

Writing board made out of 18mm thick prelaminated exterior grade MDF board OSL,Grade I, Type II,Designation PLMDF-12,one side Classic walnut face and balancing white on other side with 4mmx18mm thick teakwood edging all around fixed with panel pins and adhesive with diamond cut pattern finishing at corners.25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame. Rest all as shown on drawing.

Arms made out of 20mm dia MS pipe duly welded frame

Material & Labour for repairs to Chair Easy Cushioned by replacing the following unserviceable parts with new which are covered under serial item no.11.01 to 11.07 of BoQ with first class teak wood/approved ones. Rest all as per drawing & as directed.Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 250/-per meter. (DRG NO. FD-358)

Front leg.

Rear leg.

Arm Rest with foam covered with Rexine

Rail of seat frame

Rail of back frame

75mm thick foam cushion of 40 density duly covered with tapestry cloth matching to seat complete all as specified and directed by the Engineer-in-Charge.

50mm thick foam cushion of 40 density duly covered with tapestry cloth matching to back complete all as specified and directed by the Engineer-in-Charge.

Material & Labour for repairs to Chair dining by replacing the following unserviceable parts with new which are covered under serial item no.12.01 to 12.06 of BoQ with first class teak wood/approved ones. Rest all as per drawing & as directed. (DRG NO. FD-1105/279/270/262/228/203)

Front leg.

Rear leg.

Stiffener.

Back rest.

Repair Chair dining by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane.

Material & Labour for repair to Chair dining MAP by replacing the following unserviceable parts with new which are covered under serial item no.13.01 to 13.06 of BoQ with first class teakwood. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD/MAP-II/05 )

Front leg.

Rear leg.

Stiffener.

Back rest.

PVC Seat 4x10mm thick RIBS moulded alongwith seat in single piece of approved quality.

Material and Labour Teakwood stiffener of suitable size 20mmx20mm thick beneath PVC seat to support PVC seat.Rest all as directed by engr-in-charge.

Material & Labour for repair to Chair dining cushioned MAP by replacing the following unserviceable parts with new which are covered under serial item no.14.01 to 14.08 of BoQ with first class teakwood/approved ones. Rest all as as per drawings and as directed.(Drg No FD/MAP-II/04,FD/E6/MAP/10(R)Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 250/-per meter.)

Front leg.

Rear leg.

Stiffener.

Vertical strip.

Tapestry cloth of seat complete.

Tapestry cloth and foam 75mm (40 D) of seat complete.

Plywood 12mm thick (9 ply) BWR gde.

Material & Labour for repair to Chair easy by replacing the following unserviceable parts with new which are covered under serial item no.15.01 to 15.08 of BoQ with first class teakwood as approved by GE.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-229/201)

Frame front/back of seat

Frame side of seat.

Frame top/bottom of back.

Frame side of back.

Repair Chair easy by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane.

Material & Labour for repair to Chair writing by replacing the following unserviceable parts with new which are covered under serial item no.16.01 to 16.07 of BoQ with first class teak wood. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-280/250)

Front leg.

Rear leg.

Stiffener.

Back rest.

Repair Chair writing by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane.

Material & Labour for repair to Stool dressing cushion by replacing the following parts with new which are covered under serial item no.17.01 to 17.06 of BoQ with first class teakwood as approved by GE.Rest all as per drawing and as directed by Engineer-in-Charge. (DRG NO. FD/E6/MAP/14) Note:-cost of tapestry cloth shall not be less than 250/-per meter.

Tapestry cloth of seat complete.

Tapestry cloth and Cushion75mm(40D) complete.

Plywood 12mm thick (9ply) BWR Gde.

Stiffener.

Supply and Fixing PVC shoe for chair CB steel / Chair verandha / Chair schoolof approved quality and suitable size.

Supply and Fixing PVC shoe for chair Dinning / Chair Easy / Chair writing/ Stool dressinh15mm dia of approved quality.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ.

M/s MAKHAN ENTERPRISES

SACKSON ENTERPRISES

B K CONTRACTORS

M/S KARTIK BUILDERS

M/s Rohit Construction Co.

M/s Balvinder Singh Engineer and Contractors

M/s NIRMAN BUILDERS