Jalgaon Industrial Area Providing HDRA protective coating treatment to sump and other misc.works

Amount

Cleaning of existing concrete/ masonry surface to receive further chemical\ polymer\ acrylic\latex based or similar treatment with the help of wire-brush, cloth, or by any other mean manually or mechanically to remove dust , loose particles, excess masonry parts etc complete with all labours, materials.

Providing and applying Dr. Fixit ( Pidilite) primeseal (Efflorescene resistant penetrating primer) in one coat after preparation of surface in relevant item of cleaning including cost of material, labour, transportation. all taxes etc complete.

Providing and applying Dr. Fixit ( Pidilite) Newcoat (Heavy duty reinforced acrylic waterproof coating) in three coats after application of Dr. Fixit ( Pidilite) primeseal primer suitable for existing brickbat coba, concrete surface etc including cost of material, labour, transportation. all taxes etc complete.

Preparing the existing concrete/tiled flooring by removing laitance and deposits prefarably by removing by grinding the concrete surface and making it in line and level to receive further treatment by any means mannually or mechanically to remove dust , loose particles, excess masory parts etc complete with all labours, materials. (Rate excluding GST)

Providing and applying FloArm Primer EP epoxy primer as per manufacturer's instructions in single coat having max 1.5 mm thickness on prepared surface before applying self levelling screed by using FloArm PES of required thickness to provide uniform level to the surface to receive further protective treatment inclusive of all tools ,plants, material and labour etc complete..

Providing and applying FloArm SL Dissipative Under coat of thickness 1.0 mm thickness followed by fixing of self adhesive copper tape for electrical insulation at 5.0 x 5.0 m grid having 0.25 micron thickness and 10.0 mm width to receive final protective treatment inclusive of all tools ,plants, material and labour etc complete..

Providing and applying final coat of self-leveling ESD Epoxy top coat FloArm ESD NF of thickness 1.5 mm to the floor surface inclusive of all tools ,plants, material and labour etc complete.

SAIRAJ INFRA (BID ID -6610068)