WBPWD/SSE/SWEC/NIQ108/2025-26

Supply & Delivery of 9 Mtr Steel Tubular Pole (Zindal /Bansal/Subham Pole) as per specification Type 410 SP 27 as overall length 9 mtr weight 108kg. & having diamention are : Out side dia & thickness of the Bottom section ( 114.3 x 5.40) mm; Middle;(88.9 x 4.85 ) mm ,Top Section (76.1x 3.25 ) mm with fixing the base plate and GI earth bolt after making drilled holes etc. on pole incl. jacketing arrangement if reqd as per direction of EIC with painting.

Erection of Single Steel tubular pole of 9 mtr. length with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly as per GSze

Supply & fixing 50mm Dia 1.5mtr long detachable type GI arm bracket suitable for the pole head.The arm bracket shall be properly welded with 15mm thick stifner plate of pole sleeve for strengthening including properly fixing arfangement with the pole by bolt , nut, wahser as per direction of EIC

Single arm bracket

Double arm bracket

Round header for mounting 4 nos Light

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary (a) Without Loop Box

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole

1st coat of aluminium paint over 1 coat of RO priming

2nd coat of aluminium paint over 1st coat

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Supplying, Installation, Testing & commissioning of dust and Vermin proof, outdoor type, front openable, double door with locking arrangement , powder coated 275 mm deep, crown top Feeder Piller made of 2 mm. Thick CRCA sheet having provision for servie meter including connections by suitable size of FR PVC insulated Copper wire, terminations by crimping type Ring/ pin sockets, installed on suitable size of Brick/C.C. foundation wih plaster and a coat of neat cement punning and comprising of following switchgears. i) 415V, 32A TPN SFU with sheet steel enclosure incl. 3 nos. DIN type 32A HRC fuse(L&T)-1 set. ii) a) 415 V MCB of Breaking capacity 10kA & C characteristic a) 20 A TPN (L&T) - 2 Nos. b)240V MCB of Breaking capacity 10kA & C characteristic 2 A SP (L&T) - 1 No. iv) Astronomical Time Switch (Astro Mini L&T)-1 No. v) 3 Pole, 220 V Contactor MO-32 (L&T)-1 No. vi) 3 Position Toggle Switch.- 1 No.vii) 4 way MCB SS enclosure-3 Nos. viii) 4 Way DMC inslated stud type connector-2 Nos.

Supply and delivery of following size cable (Make-Gloster/Polycab/KEI/HAVELLS)

4core 10 sqmm XLPE PVC Aluminium armored cable

2core 6 sqmm XLPE PVC Aluminium armored cable

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

4core 10 sqmm XLPE PVC Aluminium armored cable

2 core 6 sqmm XLPE aluminium armoured cable

Supply only Street lighting luminaire with high power LEDand unique peanut lens to ensure uniform distribution Suitable for use with 230 volt 50 HZ AC Supply etc as required. Cat: Phillips smart bright essential BRP033 LED90 CW SLR GR PSU SPD or equivalent Make of Wipro/Benlo with 5 years warranty.

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting

Supply & Delivery of 15 watt LED Bollard light opal PC diffuser and IP65 protection. PDC Heat sink on Top for better thermal management and Extruded aluminum body. Luminaire Efficacy: Upto 85 lm/W Epoxy powder coated in Graphite grey Electrical Class I & Constant current electronic driver provided with high voltage, open & short circuit protection. Model Tulip BGBOM 1000 15W LED WW Make Bajaj or equivalent make of K lite/wipro/jaquar]

Installation & testing of bollard lighting on existing cylindrical muffing.

S & F LED (make: SAMSUNG, LED module) lamp double run for upper letters & double run for lower letters & triple run for ashok stambha incl. best quality LED lighting arrangement to be fixed by proper arrangement with complete connection. Making structure for Glow sign board on the roof on 22' long 1.5 inchx1.5inch four nos angle iron bracket for support on the back side rigidly grouted or drilling the hole for protection support by heavy type screw, nuts and neat cement finishing and painting. S & F water proof 600 watt power supply system IP65, 50/60Hz frequency, 108 to 305 VAC power supply, >.095 power factor for LED lamp. (Make : High Sign, NICHA,CREAY,Similar make).Total-5 nos. Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. S & F blue colour GI sheet (24SWG) in the back side of LED board for rain water protection, Transportation cost for taken the glow sign board from Co’s workshop to work site including loading, un-loading. .Cost of Scaffolding arrengement of fixing above mentioned LED board.