Resurfacing the existing internal roads of Port Qtrs area in VOC Port

Amount

Excavation for roadway in soil using hydraulic excavator of 0.90 Cum. bucket capacity including cutting and loading in tipper, trimming bottom and side slopes in accordance with requirement of lines, grades and cross section and transporting to the embankment location within all lifts and lead upto 1000 meters etc., complete as per clause 301 of MORT&H Specification (Fifth Revision) and as directed by the departmental officers.

Providing, laying, spreading Wet Mix Macadam (WMM) by mechanically and compacting to compacted thickness 250mm using stone aggregates as per Table 400-11 including spreading in uniform thickness of two layers of each 125mm tk., hand packing, rolling with vibrator power roller 8-10 tonne in stage to proper grade and camber including spreading in uniform thickness, watering and compacting to the required density as per MORT&H specification (Fifth Revision) clause 406 and as directed by the departmental officers.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 Kg. / Sqm. using mechanical means as per Clause 502 of MORT&H Specification (Fifth Revision) including cost of bitumen emulsion, labour, T&P etc., complete and as directed by the departmental officers.

Providing and laying Dense bituminous macadam with 100-120 TPH batch type Hot Mix Plant producing an average output of 75 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification (Fifth Revision) Clause No.505 complete in all respects including cost of bitumen, labour, materials, T&P etc., complete and as directed by the departmental officers.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 Kg. per Sqm. on the prepared bituminous / granular surface cleaned with mechanical brooms including cost of bitumen emulsion, labour, T&P etc., complete as per clause 503 of MORT&H Specification (Fifth Revision) and as directed by the departmental officers.

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades. The cost including all materials viz., Viscosity grade bitumen, aggregates, laying, levelling, compacting, tools & plants, labour etc., complete as per Clause No.510 of MoRT&H Specification (Fifth Revision) and as directed by the departmental officers.

Providing and laying Bituminous Concrete (BC) to the required thickness with 100-120 TPH Hot Mix Plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with Bituminous binder @ 5.4 to 5.6 Percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H Specification (Fifth Revision) clause No. 507 complete in all respects including cost of bitumen, labour, materials, T&P etc., complete and as directed by the departmental officers.

Providing and laying of Hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms. per Sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 for centre line and edge line. The finished surface to be level, uniform and free from streaks and holes etc., The rate including cost and conveyance of all materials, labour, incidental charges, marking for applying paint, brushes, equipments etc., complete as per MORT&H Specification (Fifth Revision) Clause No.803 and as directed by the departmental officers.

IMMANUEL AND CO

Bidder Name

IMMANUEL AND CO

S.M.Thomaiyar & Son