Repair and Renovation of Bathrooms at First Floor and Ground Floor at NHM, Nagrota Office Jammu

Amount

Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm (walls, Floor).

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground or as directed by I/c Engineer

Demolishing cement concrete maually / by mechanical means including disposal of material as directed by I/c Engineer in 1:4:8 or leaner mix

Demolishing cement concrete maually /by mechanical means including disposal of material as directed by I/c Engineer in 1:3:6 or richer mix

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material as directed by I/c Engineer in cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead (of area of 3 sq. metres and below)

Providing and laying water proofing treatment on slabs/ RCC walls/ Toilets by applying cement slurry mixed with Brushcrete of M/s Fosroc Company Pvt. Ltd. Services or equivalent company consisting of applying : a) after surface preparation, first layer of slurry of cement @ 100 kg of brushcrete with 50 kgs of cement mixed. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with brushcrete @ 0..670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and sunken slabs.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying in position cement concrete of specified grade including the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete of specified grade including the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) Crushed

Engangment plumber and helper for removing of old existing sanitary chinaware items from existing washroom incl. GI and PVC pipe

Plumber

Helper

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Providing and laying in position cement concrete of specified grade including the cost of centring and shuttering- All work upto plinth level. 1:1.5:3 (1 Cement: 1.5 Coarse sand: 3 graded stone aggregate 20mm nominal size) Crushed

Reinforcement for R.C.C. work including carriage straightening,cutting, bending, placing in position and binding all complete. Cold twisted bars

Granite flooring in floors, staircases treads and risers, landings, skirtings and like with 18mm thick granite stone (sample of granite shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement 4 coarse sand) laid and jointed with grey cement slurry including moulding of edges, rubbing and polishing complete.

Providing of double noising (edge) of granite sheet to required shape to achieve arch look in treads.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing of 19mm thick (water proof ) marine ply of approved brand in kitchen counters, cabinets, shelves, drawers etc & 6mm thick ply on back side. All shutters and edges of visiable sides of 19mm ply shall be fixed with 15mm thick margin, all exposed faces inside as well as out side have to finished with lamination ( thickness 1mm minimum) of approved shade and make including all hardware fittings, channels, cover fillets, mouldings as per drg

Under counter cabinets

Overhead cabinets 350mm deep

P/F of stainless steel Plate rack of approved size and quality incl all fitting complete.

Supplying and fixing frosted glass cabin for toilets, partitions of the urinal with necessary Accessories Complete job

Male and famale bathrooms

Partition of urinal frosted glass

Supply and installation of sanitary items (Make: Jaquar/Hindware/Cera of Heavy Duty)

CPVC Pipes 20 mm dia (which including bend, union, colar, Tee all fitting complete job)

CPVC Pipes 25mm dia (which including bend, union, colar, Tee all fitting complete job)

110 mm dia PVC pipe (which including bend, colar, P-Trap, S-Trap all fitting complete job)

80 mm dia PVC pipe (which including bend, colar, P-Trap, S-Trap all fitting complete job)

RCC main hole 600 x 600 mm

Cleaning of Septic Tank size 12' x 18'

WC one piece (ARSWHT39751P)

CP piller tap (CON-167KNB/169KNB)

Angle Valve

Health Feucet

PVC connection pipe 24" long

Steel waste water pipe for wash basin

Towel Rod (ACN1111NM)

Towel Ring Square (ACN1121N)

Glass corner shelf

Soap Dish (ACN1131N)

Mirror 900 x 1200 mm

2 way CP bib cock (CQT-23041)

Waste coupling

SS Greating (Cockroach)

Soap dispencer with glass bottle (AKP35735P)

Orrisa pan (cera/hindware) with PVC Cisten 5 ltr capacity with steel long bend

Counter washbasin (FLSWHT5701)

Urinal without sensor (URSWHT13261)

Steel dustbin with cover 600 mm height

Geyser 60 ltr capaicty (Jaquar/Havels)

M/S Narsehain Engg and Builders Pvt

Suresh Kumar

MANZOOR AHMED NATNOO

M/S VIJAY KUMAR