Construction of Sub Tehsil Building at Jole Distt Una HP SH CO Building portion Water supply and Sanitary Installation Rain Water harvesting tank septic tank and site development

Amount

Excavation in earth work in foundation and trenches etcetera in all kind and classification of soil such as pick work, jumper work, pick jumper work, blasting work and hard blasting work and saturated soil any other mixed verity of soil in dry or saturated condition upto any depth and lift upto any height including chiseling/wedging out rocks where blasting prohibited dewatering pumping or bailing out water where required and/ removal of slush seprately as directed which may arise during the execution including stacking the serviceable and unserviceable material and then returning stacked soil in any thickness of layers when required into plinth side of foundation etcetera consolidating each deposited layers by ramming and watering then disposing of all surplus unserviceable excavated earth as specified dumping place as per the direction by Engineer in charge including entire carriage of materials sale tax with in all leads and lifts and other incidentialss. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and filling of hard stone/boulder under floor upto 22.5 cm (twenty two point five centimeter thick at site as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in foundations, footings, bases of columns, etc. for mass concrete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Columns, Pillars, Piers, Abutments, Posts and Struts as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Suspended floors, roofs, landings, balconies and access platformas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Lintels, beams, plinth beams, girders, bressumers and cantilevers as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Stairs, (excluding landings) except spiral stair cases as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Edges of slabs and breaks in floors and walls under 20cm (twenty centimeter) wide as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:5:10 (one cement : five fine sand : ten graded/ crushed stone aggregate 40 mm (forty millimeter) nominal size mechanically mixed and curing complete excluding the cost of centering and shuttering in foundation and plinth level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8(one cement: four sand: eight graded/crushed stone aggregate 40mm (forty miillmeter) nominal size mechanically mixed and curing complete excluding cost of centering and shuttering in foundation and plinth level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:3:6 (one cement:three sand: six graded/crushed stone aggregate 40mm (forty millimeter) nominal size mechanically mixed and curing complete excluding cost of centring and shuttering in foundation and plinth level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying damp proof course 38mm (thirty eight millimeter) thick cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (twelve point five millimeter) nominal size and curing complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.70 kg (one point seventy kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete M-20 design mix to obtain the compressive strength of 20N/mm² with graded crushed stone aggregate 20mm (twenty millimeter) nominal size to give smooth and even surface with minimum cement contents not less than at the rate of 320 kg (three hundred twenty kilogram) per cubic meter mechanically mixed including curing complete excluding cost of form work in foundation and plinth level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete work M-25 (M-twenty five) design mix to obtain compressive strength of 25N/mm² with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre including curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundations, footings, bases of columns and the like and mass concrete upto all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete work M-25 (M-twenty five) design mix to obtain compressive strength of 25N/mm² with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre including curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete work M-25 (M-twenty five) design mix to obtain compressive strength of 25N/mm² with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre including curing complete excluding cost of form work and reinforcement for reinforced concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level upto all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Mild steel and Medium Tensile steel bars/Tor steel reinforcement approved make i.e. SAIL, RINL,Shyam Steel/TISCO for reinforced cement concrete work including bending binding straightning and placing in position complete including cost of binding wire upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Smooth finishing of the exposed surface of R.C.C. work with 6 mm (six millimeter) thick with cement mortor 1:3 (one cement : three sand) in any floor/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6(One cement: six sand) in all heights and depth as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to any floor including scaffolding V level in all shapes and sizes in cement mortor 1:6 (one cement: six sand)upto any floor level/height as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in cement mortor 1:4 (one cement: four sand) upto any floor level/height including scaffolding as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing cup board shutters 25 mm (twenty five millimeter) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked of Action tesa black cobra, Green ply, Kitply make , exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm (twenty five millimeter) wide x12 mm (twelve millimeter) thick with necessary screws and bright finished stainless steel piano hinges, complete as per the direction by the Engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 18mm (eighteen millimeter) thick Pre-laminated flat pressed 3 (three) layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked of Action tesa black cobra, Green ply, Kitply make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter) thick Pre-laminated flat pressed 3 (three) layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked of Action tesa black cobra, Green ply, Kitply make , in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 8mm (eight millimeter)thick commercial ply conforming to IS:1328 BWR type made of Action Tasa, Black copra, Green ply, Kitply plain lining with necessary screws, nuts and bolts/ nails, including a coat of approved primer on one face, and fixed on wooden / steel frame work comple any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and Fixing 1mm (one millimeter) thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing second class teak wood lipping/ moulded beading or taj beading of size 18 x 5 mm eighteen into five millimeter) fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and Fixing 12mm (twelve millimeter) Rai wood plain lining with tongued and grooved jointing and screws (frame work and cover fillets to be measured and paid seprately) upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing sal wood work in frames of false ceiling, partitions etcetera sawn and fixed in position with necessary stainless steel screws etcetera upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 50 x 30mm (fifty into thirty millimeter) (base and height) wooden moulded corner beading of triangular shape to the junction of panelling etcetera with iron screws, plugs and priming coat on unexposed surface etcetera complete as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 25 x 12mm (twenty five into twelve millimeter) (base and height) wooden moulded corner beading of triangular shape to the junction of panelling etcetera with iron screws, plugs and priming coat on unexposed surface etcetera complete as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 19 x 19mm (nineteen into nineteen millimeter) (base and height) wooden moulded corner beading of triangular shape to the junction of panelling etcetera with iron screws, plugs and priming coat on unexposed surface etcetera complete as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete for fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing glazing with float glass panes of 5 mm (five millimeter) thickness (weight not less than 12.50 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing glazing with float glass panes of 4.5 mm (four point five millimeter) thickness (weight not less than 10.00 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing double action hydraulic floor spring with stainless steel cover plate minimum 1.25 mm (one point two five millimeter) thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, (one hundred twenty five kilogram) for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for fly proof stainless steel grade 304 wire gauge with 0.5 mm (zero point five millimeter) dia. wire and 1.4mm (one point four millimeter) wide aperture with matching wood beading doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm (twenty five millimeter) to 40 mm (forty millimeter) thick as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm( two hundred millimeter) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement (Only weight of grill to be measured for payment) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeter) thick Pre-laminated particle board with decorative lamination on both sides,flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling of Action tesa /black cobra make fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeter) thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side,flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling of Action tesa/black cobra make fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 0.63mm (zero point six three millimeter) thick PGI sheet covering of approved patternand design, made out of machine cut covering with stainless steel screws including providing aluminium washers2mm (two millimeter) thick, at a staggered pitch of 200mm (two hundred millimeter) center to center to including drilling hols in the receiving surface and providing expandable plastic sleeves in holes etcetera complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 300x16mm(three hundred into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x16mm(two hundred fifty into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 200x10mm (two hundred into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100x10mm (one hundred into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeter ) aluminium handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing chromium plated brass 50 mm (fifty millimeter) cupboard or wardrobe knobs with nuts complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter ) bright finished hard drawn hooks and eyes as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter ) dia chromium plated brass curtain rod having wall thickness of 1.25mm (one point two five millimeter) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg (thirty six kilogram) to 80 kg (eighty kilogram) and door width from 701 mm (seven hundred one millimeter) to 1000 mm (one thousand millimeter), with double speed adjustment with necessary accessories and screws etc. complete as per the direction of Engineer-In-Charge including making good the floors as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) bright finished brass double acting spring hinges with necessary brass screws etc. complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Kota stone slab flooring over 20 mm (twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete 25mm (twenty five millimeter) thick (yellow marble band to be paid seprately) upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Kota stone slab 25 mm (twenty five millimeter) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (one cement :three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying pink plain marble band (table rubbed and polished) in flooring 20mm (twenty millimeters) thick base in cement mortor 1:4 (one cement: four sand) laid and jointed with grey cement slurry, including rubbing and polishing complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (twenty millimeter) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 18mm (eighteen millimeter) thick polished Granite stone for wall lining upto 10m (ten meter)height with special adhesive over 12mm (twelve millimeter) thick bed of cement mortor 1:3 (one cement: three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade any floor level/height as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Extra for pre finished nosing to treads of steps of marble stone any floor level/height as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying 600mm x 600mm (six hundred millimeter into six hundred millimeter) ten millimeter thick double charged vitrified floor tiles of Kazaria, NITCO, SOMAMY, ORIENT, RAK make with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etc., complete upto any floor leven/height as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying ten millimeter thick double charged Vitrified tiles in 600mm x 600mm ( six hundred millimeter into six hundred millimeter) of Kazaria, NITCO, SOMAMY, ORIENT, RAK make, with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square meter) including grouting the joint with white cement and matching pigments etc. complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying five point five millimeter or more thick double charged vetrified Glazed Ceramic floor tiles of size 300x300 mm (three hundred into three hundred millimeter) or more of Kazaria, NITCO, SOMAMY, ORIENT, RAK make, of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimeter) thick cement mortar 1:4 (one Cement: four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etcetera complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing first quality five point five millimeter or more thick ceramic glazed floor tiles conforming to IS : 15622 of Kazaria, NITCO, SOMAMY, ORIENT, RAK make of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point three kilogram per suqare meter) including pointing in white cement mixed with pigment of matching shade complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Grouting the joints of flooring tiles Size of 600x600 mm (six hundred into six hundred millimeter) aving joints of 3 mm (three millimeter) width, using epoxy grout mix of 0.70 kg (zero point seventy kilogram) of organic coated filler of desired shade (0.10 kg( zero point ten kilogram) of hardener and 0.20 kg (zero point twenty kilogram) of resin per kg), including filling / grouting and finishing complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4mm (twenty millimeter into twenty millimeter into four millimeter) in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm (two point five kilogram per square meter) and grouting of the same. The rate is inclusive of all operation, material and required pattern approved upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Chequered terrazo tiles 22mm (twenty two millimeter) thick with graded marble chips of size up to 6mm (six millimeter) in floors, jointed with neat cement slurry mixed with light shade pigment using white cement to match the shade of the tiles, including rubbing and polishing complete, on 20 mm (twenty millimeter) thick bed of cement mortar 1:4 (one cement :four coarse sand) upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying factory made chamfered edge Cement Concrete paver blocks of NTC make in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm (fifty millimeter) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of 80 mm (eighty millimeter) thick C.C. paver block of M-30 (M thirty) grade with approved color design and pattern as per required size and pattern, finishing and sweeping extra sand complete all upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm (twenty into ten into two millimeter) and braced with flat iron diagonals 20x5 mm (twenty into five millimeter) size, with top and bottom rail of T-iron 40x40x6 mm (forlty into forty into six millimeter), with 40 mm (forlty millimeter) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing prepainted steel sheet (Tata make) in roofing over all steel trusses providing and fixing with hot dipped metalic zinc coated Kotar Metal or its equivalent pre-painted single skin trapezodial profile sheeting 0.60mm (zero point six zero millimeter) thickness having 1060mm (one thousand sixty millimeter) cover width, overall width 1126mm (one thousand one hundred twenty six millimeter) , 28mm (twenty eight millimeter) crest depth at 353+2mm (three hundred fifty plus two millimeter) center to center to crest distance, having two ribs at the center for stiffening having crest depth of 2.5mm (two point five millimeter). The main crest width at top of 25mm (twenty five millimeter) and at lower 81mm (eighty one millimeter) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of polyester to black coat of 5(five) microns over 5 (five) microns primer coating including fixing with self tapping screws5.5mm (five point five millimeter) ida and 5.5cm (five point five centimeter) length as required with EPDM seal complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (sixty centimeter) overall with 0.60mm (zero point six zero millimeter ) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets of TATA Durashine with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5(five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia and prepainted G.I. limpet and bitumen washers complete with all accessories as required complete any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing valley 60 cm (sixty centimeter) overall 0.60mm (zero point six zero millimeter) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet of TATA Durashine with top coat of regular modified polyster organic coating of back coat of polyster of 5(five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and rubber washers complete with all accessories as required complete any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing flushing 38 cm (thirty eight centimeter) overall 0.60mm (zero point six zero millimeter) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet of TATA Durashine with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5(five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and rubber washers complete with all accessories as required complete any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 30 cm (thirty centimeter) wide 45 cm (forty five centimeter s) overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm (forlty into three millimeter s) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into fifty millimeter) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) diameter on wall face unplasticised Rigid PVC rain water pipesof D-plas/ Fino,.ex make having working pressure 4.00 kg (four point zero zero kilogram) per Square centimeter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion,-Single socketed pipes as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimeter) plain bend on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimeter) plain shoe on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimeter)coupler on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Steel work (Tata/Sail/Shyam Steel) welded in built up sections,trusses and framed work ,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint complete in all respect in trusses and trussed purlins in buildings upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Steel work welded in built up sections,trusses and framed work approved make i.e.TATA/JINDAL Udyog (Rajpura) ,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in gratings framed guard bars, ladders, railling, brackets and similar works complete upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (zero point ninety liter per ten square meter) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eighty liter per ten square meter) of approved brand and manufacture upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 6 mm (six millimeter) thick Cement fiber board as per IS: 14862 plain (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S.round holding down or anchor bolts with nuts and washer plates complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1 mm (one millimeter) thick M.S. sheet slidingshutters, with frame and diagonal braces of 40x40x6 mm (forty into forty into six millimeter) angle iron, 3 mm (three millimeter) M.S. gusset plates at the junctions and corners, 25 mm (twenty five millimeter) dia pulley, 40x40x6 mm(forty into forty into six millimeter) angle and Tiron guide at the top and bottom respectively, including applying a priming coat of approved steel primer as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing teak wood second class 75x 65mm (seventy five into sixty five millimeter ) wooden moulded hand railing with iron screws, plugs and priming coat on unexposed surface etcetera complete any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, stair case railing and similar works, including applying priming coat of approved steel primer in all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying priming coat over make of ICI, Nerolac, Berger, Asian Paint, Shalimar with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade of Nerolac/ Asian/Berger make two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety liter per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm (zero point seven five liter per ten square meter) of approved brand and manufacture in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Polishing on wood work with ready mixed wax polish of approved brand and manufacture new work as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

6mm (six millimeter) plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction by the Engineer in charge in any floor level any height including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) Cement plaster on the rough side of single or half brick wall of mix cement mortor 1:6 (one cement: six sand) in any floor level/any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

20mm (twenty millimeter) Cement plaster on the rough side of single or half brick wall of mix cement mortor 1:6 (one cement: six sand)in any floor level/any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing plaster drip course/ groove in plastered surface or moulding to R.C.C. projections as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm (one millimeter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications of Nerolac/Asian/Berger make two or more coats applied on walls @ 1.25 ltr/10 sqm (one point twenty five liter per ten square meter) over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (zero point seventy five per ten square meter) as per the direction by the Engineer in charge in all floor leve/height including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand of Nerolac/Asian/Berger make and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat with cement primer in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing walls with Acrylic Smooth exterior paint of required shade with Nerolac/Asian/Berger make new work (Two or more coat applied @ 1.67 ltr/10 sqm (one point sixty seven liter per ten square meter) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (two point twenty kilogram per ten square meter) in all floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etcetra exceeding 80 mm (eighty millimeter) dia. but not exceeding 300 mm (three hundred millimeter) dia including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth , including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimeter) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within any lead as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded/crushed stone aggregate 40 mm (forty millimeter) nominal size up to haunches of 100mm (one hundred millimeter) dia meter S.W. pipes including bed concrete as per standard design as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) of preferred make of Cera/Hindware as per standard bidding document with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern and C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand of preferred make of Cera/Hindware as per standard bidding document, shape, size and pattern including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimeter) dia CP Brass single hole basin mixer of approved quality of preferred make of Cera/Hindware as per standard bidding document, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred millimeter) with a 15 mm (fifteen millimeter) CP Brass single hole basin mixer as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal of preferred make of Cera/Hindware as per standard bidding document for wash basin completely recessed at the back for the reception of pipes and fittings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) dia P.V.C. waste semi rigid pipe for sink or wash basin including P.V.C. waste fittings complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass of preferred make as per standard bidding document complete with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT towel rail complete of preferred make as per standard bidding document with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimeter) long towel rail with total length of 645 mm (six hundred forty five millimeter), width 78 mm (seventy eight millimeter) and effective height of 88 mm, weighing not less than 190 gms (one hundred ninety grams) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimeter) glass shelf of preferred make as per standard bidding document with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT soap Dish Holder of preferred make as per standard bidding document having length of 138mm(one hundred thirty eight millimeter), breadth 102mm (one hundred two millimeter), height of 75mm (seventy five millimeter) with concealed fitting arrangements, weighing not less than 106 gms (one hundred six grams) size as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass bib cock of preferred make of Jal, Jaquar/Prayag/Hindware as per standard bidding document conforming to IS:8931 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass long nose bib cock of preferred make Jal, Jaquar, Hindware, Prayag as per standard bidding document conforming to IS standards and weighing not less than 810 gms (eight hundred ten grams) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass stop cock (concealed) of standard design and of preferred make as per standard bidding document conforming to IS:8931 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore uplasticised PVC connection pipe with brass unions of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) nominal bore gun metal gate valve with C.I. wheel of preferred make as per standard bidding document (screwed end)as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter) nominal boregun metal gate valve with C.I. wheel of preferred make as per standard bidding document (screwed end)as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal ball valve (brass) of preferred make as per standard bidding document, High or low pressure, with plastic floats complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal brass ferrule with C.I. mouth cover of preferred make as per standard bidding document including boring and tapping the main as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Making connection 25 to 40mm (twenty five to forty millimeter) nominal bore of G.I. distribution branch with G.I. main of preferred make as per standard bidding document by providing and fixing tee, including cutting and threading the pipe etc. complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded/ crushed stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded/crushed stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : 4 graded/ crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded/ crushed stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded/crushed stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : 4 graded/ crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimeter)size (inside) the weight of cover to be not less than 4.50 kg (four point fifty kilogram) and frame to be not less than 2.70 kg (two point seventy kilogram) as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimeter) dia nominal bore G.I. Pipes complete of preferred make of Jindal/Tata as per standard bidding document with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimeter) dia nominal bore G.I. Pipes complete of preferred make of Jindal/Tata as per standard bidding document with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure 1216 (16 mm OD) pipe conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one point zero zero) metre ( spacing. This includes the costs of cutting chases and including testing of joints complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure 1620 (20 mm OD) pipe conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one point zero zero) metre ( spacing. This includes the costs of cutting chases and including testing of joints complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back half stall urinal of preferred make as per standard bidding document of size 580x380x350 mm (five hundred eighty into three hundred eighty into three hundred fifty millimeter) with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 (five) litre P.V.C. automatic flushing cistern as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing C P. brass toilet paper holder of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make tripple layer 1000 (one thousand) litre capacity including all fittings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal dia CP Brass Single lever telephonic wall mixer of quality and make as approved as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimeter) dia C.P. / S.S. Jet with flexible tube upto 1(one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110 mm (one hundred ten millimeter) diameter in trenches unplasticised Rigid PVC rain water pipes of D-plast/Finolex make having working pressure 4.00 kg (four point zero zero kilogram) per suare centimeter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion, (i) Single socketed pipes upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) in let and 75mm (seventy five millimeter) outlet UPVC floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors as per the direction by Engineer in charge including entire carriage of material with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing single tee with door 110x110x110mm (one hundred ten into one hundred ten into one hundred ten millimeter) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing single tee without door 110x110x110mm (one hundred ten into one hundred ten into one hundred ten millimeter) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) M.S. stays and clamps for PVC pipes of diameter as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 510x1040 mm (five hundred ten into one thousand forty millimeter) bowl depth 225 Stainless Steel A ISI 304 (18/8) kitchen sink of preferred make as per standard bidding document with drain board as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,(forty millimeter) including painting of fittings and brackets, cutting and making good the walls wherever required as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 3.00 HP Tullu Pump cromption make including board and fittings complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and fixing 455x610 mm (four hundred fifty five into six hundred ten millimeter) rectangular C.I. cover (light duty) without frame for manholes the weight of the cover to be not less than 23 kg (twenty three kilogram) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm (twenty into twenty into ten centimeter) cement concrete blocks 1:3:6 (one cement : three coarse sand : six graded/crushed stone aggregate 20 mm (twenty millimeter) nominal size as per standard design with 20x20 mm square bar as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

ARUN LATH