Improvement of road from steel Golei chhack to Bhadudi Bandh Via Debasish Hota house and main road to Pattnaik Babu house in Ward in Ward No.3

Cleaning the existing black topped surface incl. removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous.

Labour for scraping, cleaning the road surface applying tack coat using 3.0kg of bitumen for 10Sqm. and laying 75mm.thick built up spray grouting in two layers 37.5mm. thick each layer using 0.45cum.of 25mm. to 40mm. size BHGCB metal and 12.00kg. of bitumen for 10Sqm.in each layer with 0.12cum.of 12mm.size chips as key stone for 10Sqm.etc.complete.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer @ 0.60kg/sqm using mechanical means as per clause 502 of MoSRT&H(4TH REVISION).

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @ 0.20 kg/sqm on the prepared bituminous / granular surface cleaned with mechanical broom as per clause 503 of MoSRT&H(4TH REVISION).

Providing and laying bituminous macadam with hot mix plant as per clause 504 of MoSRTH specification

Providing and laying semidense bituminous macadam with hot mix plant as per clause 508 of MoSRTH specification

Road marking with hot applied thermoplastic compound with reflector signing glass beads on bitumen surface @250 gm / sqm with all materials labour, T & P etc complete in all respect

Refelctor

Supplying, fitting, fixing sign boards made out of 3mm thick Aluminium composite materials (ACM) Sheet duly coated one side loaded with pressure sensitive encapsulated lens typs high intensive grade retro- reflective sheeting as per Morth technical specification etc complete

Dismantling & removing cement concrete including stacking the debris within intial lead and lift (ref page 221 item 23) 50mtr lead

Earthwork in foundation & plinth trenches within 50mtr initial lead, 1.5m initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per direction of the Engineer-in-charge

Fiilling in foundation & plinth with sand, incl. watering & ramming as per direction of Engr.-in-charge

C.C.(1:3:6) with 40mm CBHG metal including cost,carriage and royalty of materials

C.C. / R.C.C work of M-20 grade with 20mm and down grade C.B chips including hoisting & laying including cost,carriage and royalty , tax of materials

Supplying, fitting & placing uncoated HYSD bar reinforcement complete as per drawing and techinical specification with cost, conveyance of rod & binding, wire etc complete.

Rigid & smooth centering & shuttering for RCC works including false works and dismantling them after casting including cost of materials complete in ground floor

12mm thick cement plaster in CM(1:4) over brick work with cement punning for skirting

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP -63:2018.

Cost of Photo & Signboard