CA NO CWE/PAT/T-16/2021-22 SPECIAL REPAIR TO SINGLE OFFICERS ACCN BLDG NO P 13 OF ARMD REGT IN TARAPORE ENCLAVE UNDER GE NORTH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

S&F factory made flush shutters 35mm thick, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels, commercial type on both sides including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including S&F of stainless steel 304 Grade (natural finish) wire cloth (wire dia. 0.20 to 0.22mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 101.60 x 44.45 x 1.75 mm for chowkats or frame & shutters made of size 44.45 x 44.45 x 1.29mm for side rails and middle rail, 114.3 X 44.45 X 1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and including required nos of pivots / hinges and brass mortice lock (four levers) and two nos of key complete all as specified and directed including supply and fixing the following items: (a) Powder Coated Aluminium butt hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square marbonite single charged vitrified tiles in 600x600x 9 to 10 mm thick in floors etc. in approved shade, set & jointed in neat cement including and over 20 mm th screed bed in CM (1:6) and pointed in white coloured cement to match, in floors etc. complete all as specified.

Providing and Laying Premium (1st) quality digitally printed straight edge, punched glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 x 300 mm and 8-9 mm thick, in any pattern of light & dark / highlighters tiles etc as approved on vertical surfaces such as skirting/ dado etc set set & jointed in neat cement including and over and including 10 mm thick rendering in CM (1:4) and pointed in white coloured cement to match the colour of tiles complete all as specified and directed by Engineer in Charge.

S&F factory made pre-laminated PVC solid board 18-20 mm thick, prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup board front shutter complete fixed in position in all respect including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 1 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 1 nos. per leaf (d) Stainless Steel (304 Grade) Finished magnetic Catchers - 2 nos. per leaf (e) Stainless Steel (304 Grade) Peg Set of Three - 1 no. per leaf

S&F pre-laminated PVC solid board as in frames of cupboard shutters 40 mm thick (double sandwiched of 20 mm) prelaminated on one side with wooden finished complete fixed in position in all respect all as specified and directed by Engineer in Charge.

S&F continous (Piano) hinges, stainless steel 304 grade finished, and fixed (Size of hinges 30mm) complete all as specified and directed by Engineer in Charge.

M&L for anti skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 -8mm thick, as in floors etc. in any shade and design/pattern of light & dark tiles as approved/matching with wall tiles , set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engineer in Charge.

S&F vitreous china premium/1st quality wash basin half pedestal, white / ivory / off white, flat back min. size 500 x 400 mm including pedestal, screws and plug and brackets etc ,including all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed by Engineer in Charge.

S&F vitreous china premium/1st quality wash down water closet pan (Pedestal Pattern / EWC) S trap for ground floor and P trap for first floor white colour of size 520 x 360 x 390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing,including taking down existing of any description/ size complete all as specified and directed by Engineer in Charge.

S&F Concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories as recommended by manufacturer for fixing, packing and including actuator knob / flush plates and making space / cavity in existing brick work wall for fixing and taking down existing of any description / size complete in all respect all as specified.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified.

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish with wooden beading & applying three coats of french polishd over one coat of primer on wooden beading etc. complete fixed in position all as specified and directed.

S&F soap dish, stainless steel of suitable size to accommodate soap, tooth brush glass and tooth paste complete all as specified and directed.

S&F Corner unbreakable glass shelf 10 mm thick set of three with SS brackets fixed to wall with rawl plug and SS bolth all as directed by Engineer in Charge.

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F Pillar taps fency type long neck, cast copper alloy, with capstan head, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe or for brass ferrule and fixed in repair complete in all respect all as specified.

S&F Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F towel rod CP 60 CM long between flanges and including all accessories like brackets / screws etc as recommended by manufacturer and fixed in position complete all as specified and directed by Engineer in Charge.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

Removing of all disintegrated and loose concrete including plaster if any in RCC Column, Chajjas, slab, beams, lintel etc removing all loose rust / scale from exposed reinforcement bars by using wire brushes, sand paper, including cleaning of exposed surface of reinforcement using blower and treating exposed reinforcement with protective anti corrosive epoxy bonding chemical any tying IRC fabric 100 mm x 100mm x 10 gauge to reinforcement and applying cement slurry uniformly to exposed surfaces and pressure gunting using cement mortar 1:3:1 (1 part of cement: 3 part of coarse sand : 1 part of coarse aggregate type A-1) to average thickness of gunting not less than 40 mm and finished surfaces with 10 mm thick rendering in cement mortar and trowelled even and smooth without using extra cement and removing debries from MD land / site including necessary scaffolding and props to support the damaged structure up to any height complete all as specified and directed by Engineer in Charge.

Cutting grooves in brick walls 75 mm wide and 100 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engineer in Charge.

M&L for Baroda Green marble, machine cut as in shelves/steps/ landings/ cills/ jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 80 micron powder coating doubled panelled and double shutters consisting of frame of 127X38.10X1.74 mm and shutters made of 45X45X1.63mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutter and and stainless steel wire gauge 0.36mm nominal dia of wire and average width of aperture 1.40mm in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. (d) Powder coated Aluminium Grill made of 10 mm dia powder coated aluminium bar and 75 mm aperture of mesh for grill.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

Providing and fixing factory made extruded aluminium ventilators with 80 micron powder coating of frame of 127 X 38.10 X 1.74 mm and fixed shutter made of 45x45x1.63mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 0.32mm dia and 1.40 aperture in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F stainless steel tubing 25 mm dia chromium plated min 1.00mm wall thickness as in curtain rod complete including 02 Nos stainless steel brackets / finials fency type, stops fixed with stainless steel screws etc complete all as specified and directed.

S&F overhead shower 70mm dia with 235mm long brass shower arm incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description / size complete in all respect all as specified.

M&L for machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size, of colour 50% red coloured and 50% grey coloured , confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over and including 75mm thick PCC 1:4:8 type D-2 (40 mm graded stone aggregate) complete all as specified and directed by Engineer in Charge.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

M&L for 25 cm x 25 cm x 22mm thick Pre-cast plain Cement Concrete type B-1, 1:2:4 (12.5mm graded aggregate) as in flooring, roofing , machine pressed, set jointed and pointed in neat cement slurry with grey cement and no pigment , and cut and polished, including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer in Charge.

M&L for point wiring with 1.50 sqmm(22/3mm) pvc insulated and unsheathed FR single core stranded copper conductor for one light / fan in new PVC conduit medium grade 19/20 mm dia to be terminated in and including pressed steel terminal boxex with modular cover plate including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FR single core stranded copper earth continuity conductor controlled by one switch and / or one regulator complete including repair the surface in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for seperately) (Wiring shall be done as per colour code in IS for phase, neutral and earth) NOTE : Rate of modular metal flush boxes and modular cover plate are included in the item

All as per Sl item No 42 herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per Sl item No 42 herein before but one socket out let 5 pins 5 Amp on tindependent board omplete all as specified and directed.

M&L for point wiring with 1.50 sqmm(22/3mm) pvc insulated and unsheathed FR single core stranded copper conductor for one light / fan in EXISTING PVC conduit medium grade 19/20 mm dia to be terminated in and including pressed steel terminal boxex with modular cover plate including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FR single core stranded copper earth continuity conductor controlled by one switch and / or one regulator complete including repair the surface in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for seperately) (Wiring shall be done as per colour code in IS for phase, neutral and earth) NOTE : Rate of modular metal flush boxes and modular cover plate are included in the item

All as per Sl item No 45 herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per Sl item No 45 herein before but one socket out let 5 pins 5 Amp on tindependent board omplete all as specified and directed.

M&L for point wiring with two single cove PVC insulated cable with copper conductor of size 2.5 Sqmm in concealed rigid non metallic new PVC conduit on wall / ceiling with all fittings such as tee, bend, elbow, socket etc including sunken pressed steel terminal board of suitable size made out of 2 mm thick MS sheet and 3 mm thick plastic laminated sheet cover to fix S/S combination (ISI marked) of suitable size, making good the disturbed portion of wall / surface and all accessories along with 1.5 Sqmm PVC insulated solid copper conductor for continous earthing on independent board complete all as specified and directed by Engineer in Charge. NOTE : Rate of Modular metal flush boxes and modular cover plate are included in this item.

M&L for point wiring with two single cove PVC insulated cable with copper conductor of size 2.5 Sqmm in concealed rigid non metallic EXISTING PVC conduit on wall / ceiling with all fittings such as tee, bend, elbow, socket etc including sunken pressed steel terminal board of suitable size made out of 2 mm thick MS sheet and 3 mm thick plastic laminated sheet cover to fix S/S combination (ISI marked) of suitable size, making good the disturbed portion of wall / surface and all accessories along with 1.5 Sqmm PVC insulated solid copper conductor for continous earthing on independent board complete all as specified and directed by Engineer in Charge. NOTE : Rate of Modular metal flush boxes and modular cover plate are included in this item.

S&F Modular Fan Regulator step type 120 watts, 2 module complete all as specified and directed by Engineer in Charge.

S&F LED batten Tube light fitting 1 x 20 / 18 watt, 2 ft long T-5 including LED tube rod and 3 core flexible wire 0.5 sqmm copper cable all as specified and directed after taking down old unserviceable tube light fitting of any description.

S&F LED 15 watt decorative wall light for bedroom IP 43, complete all as specified and directed by Engineer in Charge.

S&F LED batten Tube light fitting 1 x 10 watt, 2 ft long T-5 including LED tube rod and 3 core flexible wire 0.5 sqmm copper cable all as specified and directed after taking down old unserviceable tube light fitting of any description.

S&F MCB DB TPN 4 ways VTPN series double door 415 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incomming and out going cables complete all as specified and directed by Engineer in Charge.

S&F environment friendly ultra modern, energy efficient, surface mounted, decorative oval buld head LED light high brightness of 10 W complete all as specified and directed by Engineer in Charge.

Taking down unserviceable building security light fitting of any size type and supply and fixing of powder coated pressure die cast aluminium compact LED security light fitting of 25 watt with LED lamps including mounting arrangement on GI pipe of suitable size clamp, nut bolts complete all as specified and directed by Engineer in Charge.

S&F exhaust fan AC Single phase 230/240 V of 300 mm sweep with louver complete all as specified and directed by Engineer in Charge. Note : Fixing of Exhaust Fan on wall with suitable size anchor bolt, making hole in wall for grounting and making good the disturbed surface including plaster work shall be part of job at no extra cost.

S&F in replacement MCB SP 6 to 32 Amp capacity fixing in DB's including proper thimble connections complete all as specified and directed by Engineer in Charge.

S&F in replacement MCB SPN 240 volts, 25 to 32 Amp capacity fixing in DB's including proper thimble connections complete all as specified and directed by Engineer in Charge.

KG BUILDERS

M/s Anil Kumar and co.

KK BUILDERS

Buttar Construction Co.

RUPINDER SINGH SODHI

M/S Mukesh Kumar Gupta