78(W)/EDCH/2023-24

Amount

FOR SUDRADHIKARAN OF ELECTRICITY LINE AND SUB-STATIONS (14 NOS. WORKS) AND OTHER ASSOCIATED WORKS, IN ADDITIONAL BUSINESS PLAN, IN THE AREA OF EDD-II HAPUR, UNDER EDC., HAPUR. (All work will be completed as per sanctioned estimate).

Carriage of line material (Like: 11KV Insulator, Disc, conductor, XLPE cable etc.) from Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of ST Pole 11 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

Erection & Fixing of ST Pole 11 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Carriage of 33KV Control Pannel double/Single transformers, from Electricity store center, Hapur to 33/11KV Sub-Station with loading and unloading at both ends on Kachha Packka road.

Carriage of new 11KV incoming VCB- 01No. And 11KV outgoing VCB-02Nos., from Electricity store center, Hapur to 33/11KV Sub-Station with loading and unloading at both ends on Kachha Packka road.

Carriage of 33KV VCB, from Electricity store center, Hapur to 33/11KV Sub-Station with loading and unloading at both ends on Kachha Packka road.

Carriage of 33KV CT Outdoor 33KV CTR 200/100/1, from Electricity store center, Hapur to 33/11KV Sub-Station with loading and unloading at both ends on Kachha Packka road.

Removal of all connections & other associated works of old & jarjar VCBs's for dismantling/Removal of the same.

Removal of old & jarjar 11KV incoming/outgoing VCB 03Nos., from existing place in control room and shifting the same outside the control room at 33/11KV Sub-Stations.

Removal of old & jarjar 33 KV VCB 05Nos., from existing place in control room and shifting the same outside the control room at 33/11KV Sub-Stations.

Carefully & safely shifting of 11KV incoming VCB-01No. & 11KV outgoing VCB-02Nos., from outside to inside the switchgear room at the place of removed VCB's and erection/Installation of 11KV VCB's after fixing of anchor GI nuts & bolts of proper size for completion of work by providing required material, as per RESPO/Drawing Norms.

Mounting, Placing and connecting of all connections of CT Outdoor 33KV CTR 200/100/1, and completion work properly by providing required matrial, as per RESPO Norms.

Erection/Installation of 33KV VCB, including suitable structur, after fixing of anchor GI nuts & bolts of proper size for completion of work by providing required material, as per RESPO/Drawing Norms.

Laying of Copper Control Cable 2x2.5Sqmm and completion work properly, as per RESPO/Norms.

Laying of Copper Control Cable 4x2.5Sqmm and completion work properly, as per RESPO/Norms.

Connecting, Jumpering & other associated works of installed new VCBs's including cost of required material like tape etc., as per RESPO/Drawing Norms.

Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.

Providing and Fixing of Line Isolator 33KV and completion work properly as per RESPO Drawing/Norms.

Erection & Fixing of DO 03Phase Fuse set on ST/PCC Pole by providing all required materials, including cost of Fuse set.

Erection/Installation of 33KV Control Pannel double/Single transformer after fixing of anchor GI nuts & bolts of proper size for completion of work by providing required material, as per RESPO/Drawing Norms.

Providing & Fixing Chemical earthing of Transformers Equipment the ground surface where it will be bolted to the M.S. earth strip for connection the earth strip will be welded to the earthing and neutral support, as per RESPO/Norms.

Making and filling of 33KV Cable Jointing Kit 3x300Sqmm, Outdoor type duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of jointing kit, lugs and tape etc., as per RESPO Norms.

Making and filling of 33KV Cable Jointing Kit 3x300Sqmm, Indoor type duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of jointing kit, lugs and tape etc., as per RESPO Norms.

Making and filling of 11KV Cable Jointing Kit 3x300Sqmm, outdoor type, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of jointing kit, lugs and tape etc., as per RESPO Norms.

Laying of Trenchless 33 KV XLPE Cable 3x300Sqmm., undergound (157x2=314 Double Circuit) into HDPE Pipe, spare cable shall be left in the loop shape at both ends as per RESPO/Norms., including providing of required material and HDPE Pipe etc.

Laying of 33 KV XLPE Cable 3x300Sqmm, after digging of earth making trench, by providing brick at three sides of cable and filling of soil and sand in cable trench, including cost of all material and labour.

Laying of 11 KV XLPE Cable 3x300Sqmm, after digging of earth making trench, by providing brick at three sides of cable and filling of soil and sand in cable trench, including cost of all material and labour.

Laying, Stringing and final sagging of ACSR Weasl Conductor after binding from Insulator, as per RESPO/Drawing Norms.

Laying, Stringing and final sagging of ACSR Dog Conductor after binding from Insulator, as per RESPO/Drawing Norms.

Removal of old & damaged scrap HT XLPE Cable 200 KG and bundling of the same

Carriage of old and damaged scrap HT XLPE Cable-200Kg,from Site of work to JE Store/ESC Hapur with loading and unloading at both ends.

Jumpering work properly as per RESPO/Norms.

Yash Contractor

Singh Heavy Electricals